diff options
| author | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2008-08-07 16:37:20 +0000 |
|---|---|---|
| committer | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2008-08-07 16:37:20 +0000 |
| commit | c76b0618d7457a68b464a64e91ed98dc2482b262 (patch) | |
| tree | 05cc3e57e9413d4e43908ceec7e678470f536fc5 /src/target | |
| parent | 2cec23fc3761b2f7d978851eef62c4a291a0f18f (diff) | |
| download | openocd+libswd-c76b0618d7457a68b464a64e91ed98dc2482b262.tar.gz openocd+libswd-c76b0618d7457a68b464a64e91ed98dc2482b262.tar.bz2 openocd+libswd-c76b0618d7457a68b464a64e91ed98dc2482b262.tar.xz openocd+libswd-c76b0618d7457a68b464a64e91ed98dc2482b262.zip | |
David Kuehling <dvdkhlng@gmx.de> - added jim-eventloop.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@898 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'src/target')
| -rw-r--r-- | src/target/Makefile.am | 2 | ||||
| -rw-r--r-- | src/target/interface/dummy.cfg | 1 | ||||
| -rw-r--r-- | src/target/interface/olimex-arm-usb-ocd.cfg | 4 | ||||
| -rw-r--r-- | src/target/target/aduc702x.cfg | 38 |
4 files changed, 44 insertions, 1 deletions
diff --git a/src/target/Makefile.am b/src/target/Makefile.am index be3e3146..a8e435b3 100644 --- a/src/target/Makefile.am +++ b/src/target/Makefile.am @@ -37,5 +37,5 @@ nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.script interface/signalyzer.cfg event/eir-sam7se512_reset.script target/eir-sam7se512.cfg \ event/hammer_reset.script interface/flyswatter.cfg target/hammer.cfg target/mx31.cfg \ event/str730_program.script event/str750_program.script interface/olimex-jtag-tiny-a.cfg \ - target/pic32mx.cfg + target/pic32mx.cfg target/aduc702x.cfg interface/dummy.cfg interface/olimex-arm-usb-ocd.cfg diff --git a/src/target/interface/dummy.cfg b/src/target/interface/dummy.cfg new file mode 100644 index 00000000..939803da --- /dev/null +++ b/src/target/interface/dummy.cfg @@ -0,0 +1 @@ +interface dummy
diff --git a/src/target/interface/olimex-arm-usb-ocd.cfg b/src/target/interface/olimex-arm-usb-ocd.cfg new file mode 100644 index 00000000..6e47f37e --- /dev/null +++ b/src/target/interface/olimex-arm-usb-ocd.cfg @@ -0,0 +1,4 @@ +interface ft2232
+ft2232_device_desc "Olimex OpenOCD JTAG"
+ft2232_layout olimex-jtag
+ft2232_vid_pid 0x15ba 0x0003
diff --git a/src/target/target/aduc702x.cfg b/src/target/target/aduc702x.cfg new file mode 100644 index 00000000..4269f38a --- /dev/null +++ b/src/target/target/aduc702x.cfg @@ -0,0 +1,38 @@ +## -*- tcl -*-
+##
+
+# This is for the case that TRST/SRST is not wired on your JTAG adaptor.
+# Don't really need them anyways.
+reset_config none
+
+## JTAG scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+##
+## Target configuration
+##
+target arm7tdmi little 0
+
+## software initiated reset (if your SRST isn't wired)
+#proc target_0_reset {} { mwb 0x0ffff0230 04 }
+
+# use top 1k of SRAM for as temporary JTAG memory
+#working_area 0 0x11C00 0x400 backup
+
+## flash configuration
+## AdUC702x not yet spported :(
+
+## If you use the watchdog, the following code makes sure that the board
+## doesn't reboot when halted via JTAG. Yes, on the older generation
+## AdUC702x, timer3 continues running even when the CPU is halted.
+
+proc watchdog_service {} {
+ global watchdog_hdl
+ mww 0xffff036c 0
+# puts "watchdog!!"
+ set watchdog_hdl [after 500 watchdog_service]
+}
+
+proc target_0_post_halt {} { watchdog_service }
+proc arget_0_pre_resume {} { global watchdog_hdl; after cancel $watchdog_hdl }
|