Move TCL script files -- Step 1 of 2:

- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
  - Add dist-hook to include such files under src/tcl in the distribution.
  - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
  - Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 36 insertions, 0 deletions

diff --git a/src/tcl/board/hammer.cfg b/src/tcl/board/hammer.cfg
new file mode 100644
index 00000000..ed83803f
--- /dev/null
+++ b/src/tcl/board/hammer.cfg
@@ -0,0 +1,36 @@
+# Target Configuration for the TinCanTools S3C2410 Based Hammer Module
+# http://www.tincantools.com
+
+source [find target/samsung_s3c2410.cfg]
+
+$_TARGETNAME configure -event reset-init {
+	# Reset Script for the TinCanTools S3C2410 Based Hammer Module
+	# http://www.tincantools.com
+	#
+	# Setup primary clocks and initialize the SDRAM
+	mww 0x53000000 0x00000000
+	mww 0x4a000008 0xffffffff
+	mww 0x4a00000c 0x000007ff
+	mww 0x4c000000 0x00ffffff
+	mww 0x4c000014 0x00000003
+	mww 0x4c000004 0x000a1031
+	mww 0x48000000 0x11111122
+	mww 0x48000004 0x00000700
+	mww 0x48000008 0x00000700
+	mww 0x4800000c 0x00000700
+	mww 0x48000010 0x00000700
+	mww 0x48000014 0x00000700
+	mww 0x48000018 0x00000700
+	mww 0x4800001c 0x00018005
+	mww 0x48000020 0x00018005
+	mww 0x48000024 0x009c0459
+	mww 0x48000028 0x000000b2
+	mww 0x4800002c 0x00000030
+	mww 0x48000030 0x00000030
+	flash probe 0
+}
+
+
+#flash configuration
+#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
+flash bank cfi 0x00000000 0x1000000 2 2 0