summaryrefslogtreecommitdiff
path: root/tcl/board/x300t.cfg
diff options
context:
space:
mode:
authorzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-05-27 06:49:24 +0000
committerzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-05-27 06:49:24 +0000
commitdbbc9c41f7db210b0a4e226540a28e0a8a5019bf (patch)
treece358672ddde8b15a02db12c718eb53689c490f6 /tcl/board/x300t.cfg
parent140d6c8e7948710a764965075bfaa700efd09802 (diff)
downloadopenocd+libswd-dbbc9c41f7db210b0a4e226540a28e0a8a5019bf.tar.gz
openocd+libswd-dbbc9c41f7db210b0a4e226540a28e0a8a5019bf.tar.bz2
openocd+libswd-dbbc9c41f7db210b0a4e226540a28e0a8a5019bf.tar.xz
openocd+libswd-dbbc9c41f7db210b0a4e226540a28e0a8a5019bf.zip
Move TCL script files -- Step 2 of 2:
- Move src/tcl to tcl/. - Update top Makefile.am to use new path name. git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl/board/x300t.cfg')
-rw-r--r--tcl/board/x300t.cfg30
1 files changed, 30 insertions, 0 deletions
diff --git a/tcl/board/x300t.cfg b/tcl/board/x300t.cfg
new file mode 100644
index 00000000..985f44ed
--- /dev/null
+++ b/tcl/board/x300t.cfg
@@ -0,0 +1,30 @@
+# This is for the T-Home X300T / X301T IPTV box,
+# which are based on IPTV reference designs from Kiss/Cisco KMM-3***
+#
+# It has Sigma Designs SMP8634 chip.
+source [find target/smp8634.cfg]
+
+$_TARGETNAME configure -event reset-init { x300t_init }
+
+# 1MB CFI capable flash
+# flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank cfi 0xac000000 0x100000 2 2 0
+
+proc x300t_init { } {
+ # Setup SDRAM config and flash mapping
+ # initialize ram
+ mww 0xa003fffc 3
+ mww 0xa003fffc 2
+ mww 0xa0030000 0xE34111BA
+ mww 0xa003fffc 0xa4444
+ mww 0xa003fffc 0
+
+ # remap boot vector in CPU local RAM
+ mww 0xa006f000 0x60000
+
+ # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4
+ mww 0x0006f010 0x48000000
+
+ # map flash addr to REG_BASE_cpu_block + LR_XENV_LOCATION (normally done by XOS)
+ mww 0x00061ff0 0x48000000
+}