summaryrefslogtreecommitdiff
path: root/tcl/target/lpc3250.cfg
diff options
context:
space:
mode:
authorGary Carlson <gcarlson@carlson-minot.com>2010-05-18 20:59:07 -0700
committerØyvind Harboe <oyvind.harboe@zylin.com>2010-05-19 07:37:07 +0200
commit8465e9944291a03a216fa15e0d7ed6eb9d44ba92 (patch)
tree47ddedef0642fc8b24482019016a6fe21f1b2364 /tcl/target/lpc3250.cfg
parentb80d0501b66002cba1b3bc97a027d4f79932f20d (diff)
downloadopenocd+libswd-8465e9944291a03a216fa15e0d7ed6eb9d44ba92.tar.gz
openocd+libswd-8465e9944291a03a216fa15e0d7ed6eb9d44ba92.tar.bz2
openocd+libswd-8465e9944291a03a216fa15e0d7ed6eb9d44ba92.tar.xz
openocd+libswd-8465e9944291a03a216fa15e0d7ed6eb9d44ba92.zip
reset: fix reset halt bug
I was finally able to figure out the cause of this problem. There are two parts to the patch. The first patch modifies the configuration file I originally generated for the Atmel AT91SAM9G20 board and achieves the following: +++ Splits the reset-init handler into a reset-start handler for some of the initial configuration activities and keeps the remainder in the reset-init handler as was the case before. This was the real issue that was causing the timing problems I identified before. This solution was confirmed with an o-scope on actual target hardware. +++ Adds a new instruction in the reset-start handler to disable fast memory accesses in the reset-start handler. When the target jtag clock is started out at 2 kHz during system clock initialization, memory writes (i.e. register write to enable external reset pin -- basically to RSTC_MR) are naturally slow and cause GDB keep-alive issues (refer to PATCH 2/2 for additional fixes). +++ Modifies the configuration file to use srst_only reset action. The reset-start/reset-init handler split also now allows the correct behavior to be used in the configuration file (previously had to use both SRST and TRST even though only SRST is actually used and connected on the evaluation board). +++ Adds external NandFlash configuration support to take advantage of flash driver added earlier. Doesn't fix any bugs but adds functionality that was marked as TBD before and thrown in when I did other work on the configuration file. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Diffstat (limited to 'tcl/target/lpc3250.cfg')
0 files changed, 0 insertions, 0 deletions