diff options
| author | Antonio Borneo <borneo.antonio@gmail.com> | 2010-12-19 01:22:53 +0800 |
|---|---|---|
| committer | Øyvind Harboe <oyvind.harboe@zylin.com> | 2010-12-18 21:04:22 +0100 |
| commit | 30da7c67cec8b315972377b5389735ff11f6042c (patch) | |
| tree | f5735bd53edf0b43ef27c5058fdab817d2034462 /tcl | |
| parent | af3f77a1777e4f28ec1a14122f4800ca3467e4c7 (diff) | |
| download | openocd+libswd-30da7c67cec8b315972377b5389735ff11f6042c.tar.gz openocd+libswd-30da7c67cec8b315972377b5389735ff11f6042c.tar.bz2 openocd+libswd-30da7c67cec8b315972377b5389735ff11f6042c.tar.xz openocd+libswd-30da7c67cec8b315972377b5389735ff11f6042c.zip | |
TCL: fix non TCL comments
End of line comments fixed with ';' before '#'.
Added few additional 'space' to keep indentation in
multi-line comments.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Diffstat (limited to 'tcl')
28 files changed, 732 insertions, 732 deletions
diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg index 15a9caf2..deb4da15 100644 --- a/tcl/board/at91sam9g20-ek.cfg +++ b/tcl/board/at91sam9g20-ek.cfg @@ -80,10 +80,10 @@ proc at91sam9g20_reset_start { } { # jtag speed without causing GDB keep alive problem. arm7_9 fast_memory_access disable - adapter_khz 2 # Slow-speed oscillator enabled at reset, so run jtag speed slow. - halt # Make sure processor is halted, or error will result in following steps. + adapter_khz 2 ;# Slow-speed oscillator enabled at reset, so run jtag speed slow. + halt ;# Make sure processor is halted, or error will result in following steps. wait_halt 10000 - mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset. + mww 0xfffffd08 0xa5000501 ;# RSTC_MR : enable user reset. } proc at91sam9g20_reset_init { } { @@ -97,7 +97,7 @@ proc at91sam9g20_reset_init { } { # means the master clock (MCLK) must be at or below 133 MHz or timing errors will occur. The processor # core can operate up to 400 MHz and therefore PCLK must be at or below this to function properly. - mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog. + mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog. # Enable the main 18.432 MHz oscillator in CKGR_MOR register. # Wait for MOSCS in PMC_SR to assert indicating oscillator is again stable after change to CKGR_MOR. @@ -155,11 +155,11 @@ proc at91sam9g20_reset_init { } { # a number of registers. The first step involves setting up the general I/O pins on the processor # to be able to interface and support the external memory. - mww 0xfffffc10 0x00000010 # PMC_PCER : enable PIOC clock - mww 0xfffff800 0x00006000 # PIOC_PER : enable PIO function for 13(RDY/~BSY) and 14(~CS) - mww 0xfffff810 0x00004000 # PIOC_OER : enable output on 14 - mww 0xfffff814 0x00002000 # PIOC_ODR : disable output on 13 - mww 0xfffff830 0x00004000 # PIOC_SODR : set 14 to disable NAND + mww 0xfffffc10 0x00000010 ;# PMC_PCER : enable PIOC clock + mww 0xfffff800 0x00006000 ;# PIOC_PER : enable PIO function for 13(RDY/~BSY) and 14(~CS) + mww 0xfffff810 0x00004000 ;# PIOC_OER : enable output on 14 + mww 0xfffff814 0x00002000 ;# PIOC_ODR : disable output on 13 + mww 0xfffff830 0x00004000 ;# PIOC_SODR : set 14 to disable NAND # The exact physical timing characteristics for the memory type used on the current board # (MT29F2G08AACWP) can be established by setting four registers in order: SMC_SETUP3, @@ -167,13 +167,13 @@ proc at91sam9g20_reset_init { } { # is a little tedious to do here. If you have questions about how to do this, Atmel has # a decent application note #6255B that covers this process. - mww 0xffffec30 0x00020002 # SMC_SETUP3 : 2 clock cycle setup for NRD and NWE - mww 0xffffec34 0x04040404 # SMC_PULSE3 : 4 clock cycle pulse for all signals - mww 0xffffec38 0x00070006 # SMC_CYCLE3 : 7 clock cycle NRD and 6 NWE cycle - mww 0xffffec3C 0x00020003 # SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW, + mww 0xffffec30 0x00020002 ;# SMC_SETUP3 : 2 clock cycle setup for NRD and NWE + mww 0xffffec34 0x04040404 ;# SMC_PULSE3 : 4 clock cycle pulse for all signals + mww 0xffffec38 0x00070006 ;# SMC_CYCLE3 : 7 clock cycle NRD and 6 NWE cycle + mww 0xffffec3C 0x00020003 ;# SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW, - mww 0xffffe800 0x00000001 # ECC_CR : reset the ECC parity registers - mww 0xffffe804 0x00000002 # ECC_MR : page size is 2112 words (word is 8 bits) + mww 0xffffe800 0x00000001 ;# ECC_CR : reset the ECC parity registers + mww 0xffffe804 0x00000002 ;# ECC_MR : page size is 2112 words (word is 8 bits) # Identify NandFlash bank 0. diff --git a/tcl/board/atmel_at91sam9260-ek.cfg b/tcl/board/atmel_at91sam9260-ek.cfg index e74ccf46..a37f1f5d 100644 --- a/tcl/board/atmel_at91sam9260-ek.cfg +++ b/tcl/board/atmel_at91sam9260-ek.cfg @@ -28,36 +28,36 @@ $_TARGETNAME configure -event reset-start { } $_TARGETNAME configure -event reset-init { - mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog + mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog - mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator - sleep 20 # wait 20 ms - mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator - sleep 10 # wait 10 ms - mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198.656 MHz - sleep 20 # wait 20 ms - mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler (divide by 2) - sleep 10 # wait 10 ms - mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected (99.328 MHz) - sleep 10 # wait 10 ms + mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator + sleep 20 ;# wait 20 ms + mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator + sleep 10 ;# wait 10 ms + mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR: Set PLLA Register for 198.656 MHz + sleep 20 ;# wait 20 ms + mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler (divide by 2) + sleep 10 ;# wait 10 ms + mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected (99.328 MHz) + sleep 10 ;# wait 10 ms # Increase JTAG Speed to 6 MHz if RCLK is not supported jtag_rclk 6000 - arm7_9 dcc_downloads enable # Enable faster DCC downloads + arm7_9 dcc_downloads enable ;# Enable faster DCC downloads - mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31 - mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 + mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral function for D15..D31 + mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31 - mww 0xffffef1c 0x00010002 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory + mww 0xffffef1c 0x00010002 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory - mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks) + mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks) - mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command + mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command mww 0x20000000 0 - mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' Command mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 @@ -73,9 +73,9 @@ $_TARGETNAME configure -event reset-init { mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 - mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command mww 0x20000000 0 - mww 0xffffea00 0x0 # SDRAMC_MR : normal mode + mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode mww 0x20000000 0 - mww 0xffffea04 0x2b6 # SDRAMC_TR : Set refresh timer count to 7us + mww 0xffffea04 0x2b6 ;# SDRAMC_TR : Set refresh timer count to 7us } diff --git a/tcl/board/atmel_at91sam9rl-ek.cfg b/tcl/board/atmel_at91sam9rl-ek.cfg index 3b932bf4..e18d1fdf 100644 --- a/tcl/board/atmel_at91sam9rl-ek.cfg +++ b/tcl/board/atmel_at91sam9rl-ek.cfg @@ -22,36 +22,36 @@ $_TARGETNAME configure -event reset-start { } $_TARGETNAME configure -event reset-init { - mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog + mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog - mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator - sleep 20 # wait 20 ms - mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator - sleep 10 # wait 10 ms - mww 0xfffffc28 0x2031bf03 # CKGR_PLLR: Set PLL Register for 200 MHz - sleep 20 # wait 20 ms - mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler (divide by 2) - sleep 10 # wait 10 ms - mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLL is selected (100 MHz) - sleep 10 # wait 10 ms + mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator + sleep 20 ;# wait 20 ms + mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator + sleep 10 ;# wait 10 ms + mww 0xfffffc28 0x2031bf03 ;# CKGR_PLLR: Set PLL Register for 200 MHz + sleep 20 ;# wait 20 ms + mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler (divide by 2) + sleep 10 ;# wait 10 ms + mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLL is selected (100 MHz) + sleep 10 ;# wait 10 ms # Increase JTAG Speed to 6 MHz if RCLK is not supported jtag_rclk 6000 - arm7_9 dcc_downloads enable # Enable faster DCC downloads + arm7_9 dcc_downloads enable ;# Enable faster DCC downloads - mww 0xfffff670 0xffff0000 # PIO_ASR : Select peripheral function for D16..D31 (PIOB) - mww 0xfffff604 0xffff0000 # PIO_PDR : Disable PIO function for D16..D31 (PIOB) + mww 0xfffff670 0xffff0000 ;# PIO_ASR : Select peripheral function for D16..D31 (PIOB) + mww 0xfffff604 0xffff0000 ;# PIO_PDR : Disable PIO function for D16..D31 (PIOB) - mww 0xffffef20 0x00010002 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory + mww 0xffffef20 0x00010002 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM, VDDIOMSEL set for +3V3 memory - mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks) + mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (2 x Micron MT48LC16M16A2 : 4M x 16Bit x 4 Banks) - mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command + mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command mww 0x20000000 0 - mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' Command mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 @@ -67,9 +67,9 @@ $_TARGETNAME configure -event reset-init { mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 - mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command mww 0x20000000 0 - mww 0xffffea00 0x0 # SDRAMC_MR : normal mode + mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode mww 0x20000000 0 - mww 0xffffea04 0x2b6 # SDRAMC_TR : Set refresh timer count to 7us + mww 0xffffea04 0x2b6 ;# SDRAMC_TR : Set refresh timer count to 7us } diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg index 096af1b6..094e70e9 100644 --- a/tcl/board/digi_connectcore_wi-9c.cfg +++ b/tcl/board/digi_connectcore_wi-9c.cfg @@ -48,31 +48,31 @@ target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNA $_TARGETNAME configure -event reset-init { mww 0x90600104 0x33313333 - mww 0xA0700000 0x00000001 # Enable the memory controller. - mww 0xA0700024 0x00000006 # Set the refresh counter 6 - mww 0xA0700028 0x00000001 # - mww 0xA0700030 0x00000001 # Set the precharge period - mww 0xA0700034 0x00000004 # Active to precharge command period is 16 clock cycles - mww 0xA070003C 0x00000001 # tAPR - mww 0xA0700040 0x00000005 # tDAL - mww 0xA0700044 0x00000001 # tWR - mww 0xA0700048 0x00000006 # tRC 32 clock cycles - mww 0xA070004C 0x00000006 # tRFC 32 clock cycles - mww 0xA0700054 0x00000001 # tRRD - mww 0xA0700058 0x00000001 # tMRD - mww 0xA0700100 0x00004280 # Dynamic Config 0 (cs4) - mww 0xA0700120 0x00004280 # Dynamic Config 1 (cs5) - mww 0xA0700140 0x00004280 # Dynamic Config 2 (cs6) - mww 0xA0700160 0x00004280 # Dynamic Config 3 (cs7) + mww 0xA0700000 0x00000001 ;# Enable the memory controller. + mww 0xA0700024 0x00000006 ;# Set the refresh counter 6 + mww 0xA0700028 0x00000001 ;# + mww 0xA0700030 0x00000001 ;# Set the precharge period + mww 0xA0700034 0x00000004 ;# Active to precharge command period is 16 clock cycles + mww 0xA070003C 0x00000001 ;# tAPR + mww 0xA0700040 0x00000005 ;# tDAL + mww 0xA0700044 0x00000001 ;# tWR + mww 0xA0700048 0x00000006 ;# tRC 32 clock cycles + mww 0xA070004C 0x00000006 ;# tRFC 32 clock cycles + mww 0xA0700054 0x00000001 ;# tRRD + mww 0xA0700058 0x00000001 ;# tMRD + mww 0xA0700100 0x00004280 ;# Dynamic Config 0 (cs4) + mww 0xA0700120 0x00004280 ;# Dynamic Config 1 (cs5) + mww 0xA0700140 0x00004280 ;# Dynamic Config 2 (cs6) + mww 0xA0700160 0x00004280 ;# Dynamic Config 3 (cs7) # - mww 0xA0700104 0x00000203 # CAS latency is 2 at 100 MHz - mww 0xA0700124 0x00000203 # CAS latency is 2 at 100 MHz - mww 0xA0700144 0x00000203 # CAS latency is 2 at 100 MHz - mww 0xA0700164 0x00000203 # CAS latency is 2 at 100 MHz + mww 0xA0700104 0x00000203 ;# CAS latency is 2 at 100 MHz + mww 0xA0700124 0x00000203 ;# CAS latency is 2 at 100 MHz + mww 0xA0700144 0x00000203 ;# CAS latency is 2 at 100 MHz + mww 0xA0700164 0x00000203 ;# CAS latency is 2 at 100 MHz # - mww 0xA0700020 0x00000103 # issue SDRAM PALL command + mww 0xA0700020 0x00000103 ;# issue SDRAM PALL command # - mww 0xA0700024 0x00000001 # Set the refresh counter to be as small as possible + mww 0xA0700024 0x00000001 ;# Set the refresh counter to be as small as possible # # Add some dummy writes to give the SDRAM time to settle, it needs two # AHB clock cycles, here we poke in the debugger flag, this lets @@ -89,19 +89,19 @@ $_TARGETNAME configure -event reset-init { mdw 0xA0900000 mdw 0xA0900000 # - mww 0xA0700024 0x00000030 # Set the refresh counter to 30 - mww 0xA0700020 0x00000083 # Issue SDRAM MODE command + mww 0xA0700024 0x00000030 ;# Set the refresh counter to 30 + mww 0xA0700020 0x00000083 ;# Issue SDRAM MODE command # # Next we perform a read of RAM. # mw = move word. mdw 0x00022000 # mw 0x00022000:P, r3 # 22000 for cas2 latency, 32000 for cas 3 # - mww 0xA0700020 0x00000003 # issue SDRAM NORMAL command - mww 0xA0700100 0x00084280 # Enable buffer access - mww 0xA0700120 0x00084280 # Enable buffer access - mww 0xA0700140 0x00084280 # Enable buffer access - mww 0xA0700160 0x00084280 # Enable buffer access + mww 0xA0700020 0x00000003 ;# issue SDRAM NORMAL command + mww 0xA0700100 0x00084280 ;# Enable buffer access + mww 0xA0700120 0x00084280 ;# Enable buffer access + mww 0xA0700140 0x00084280 ;# Enable buffer access + mww 0xA0700160 0x00084280 ;# Enable buffer access #Set byte lane state (static mem 1)" mww 0xA0700220 0x00000082 diff --git a/tcl/board/eir.cfg b/tcl/board/eir.cfg index 3754a422..a014e116 100644 --- a/tcl/board/eir.cfg +++ b/tcl/board/eir.cfg @@ -30,60 +30,60 @@ $_TARGETNAME configure -event reset-init { # # Enable SDRAM control at PIO A. - mww 0xfffff474 0x3f800000 # PIO_BSR_OFF - mww 0xfffff404 0x3f800000 # PIO_PDR_OFF + mww 0xfffff474 0x3f800000 ;# PIO_BSR_OFF + mww 0xfffff404 0x3f800000 ;# PIO_PDR_OFF # Enable address bus (A0, A2-A11, A13-A17) at PIO B - mww 0xfffff674 0x0003effd # PIO_BSR_OFF - mww 0xfffff604 0x0003effd # PIO_PDR_OFF + mww 0xfffff674 0x0003effd ;# PIO_BSR_OFF + mww 0xfffff604 0x0003effd ;# PIO_PDR_OFF # Enable 16 bit data bus at PIO C - mww 0xfffff870 0x0000ffff # PIO_ASR_OFF - mww 0xfffff804 0x0000ffff # PIO_PDR_OFF + mww 0xfffff870 0x0000ffff ;# PIO_ASR_OFF + mww 0xfffff804 0x0000ffff ;# PIO_PDR_OFF # Enable SDRAM chip select - mww 0xffffff80 0x00000002 # EBI_CSA_OFF + mww 0xffffff80 0x00000002 ;# EBI_CSA_OFF # Set SDRAM characteristics in configuration register. # Hard coded values for MT48LC32M16A2 with 48MHz CPU. - mww 0xffffffb8 0x2192215a # SDRAMC_CR_OFF + mww 0xffffffb8 0x2192215a ;# SDRAMC_CR_OFF sleep 10 # Issue 16 bit SDRAM command: NOP - mww 0xffffffb0 0x00000011 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000011 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 # Issue 16 bit SDRAM command: Precharge all - mww 0xffffffb0 0x00000012 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000012 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 # Issue 8 auto-refresh cycles - mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 - mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 - mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 - mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 - mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 - mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 - mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 - mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000000 # Issue 16 bit SDRAM command: Set mode register - mww 0xffffffb0 0x00000013 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000013 ;# SDRAMC_MR_OFF mww 0x20000014 0xcafedede # Set refresh rate count ??? - mww 0xffffffb4 0x00000013 # SDRAMC_TR_OFF + mww 0xffffffb4 0x00000013 ;# SDRAMC_TR_OFF # Issue 16 bit SDRAM command: Normal mode - mww 0xffffffb0 0x00000010 # SDRAMC_MR_OFF + mww 0xffffffb0 0x00000010 ;# SDRAMC_MR_OFF mww 0x20000000 0x00000180 # diff --git a/tcl/board/embedded-artists_lpc2478-32.cfg b/tcl/board/embedded-artists_lpc2478-32.cfg index 49396990..1bbf4bb6 100644 --- a/tcl/board/embedded-artists_lpc2478-32.cfg +++ b/tcl/board/embedded-artists_lpc2478-32.cfg @@ -42,28 +42,28 @@ proc enable_pll {} { if {[expr [read_register 0xE01FC080] & 0x03] == 3} { # Disconnect it, but leave it enabled # (This MUST be done in two steps) - mww 0xE01FC080 0x00000001 # PLLCON: disconnect PLL - mww 0xE01FC08C 0x000000AA # PLLFEED - mww 0xE01FC08C 0x00000055 # PLLFEED + mww 0xE01FC080 0x00000001 ;# PLLCON: disconnect PLL + mww 0xE01FC08C 0x000000AA ;# PLLFEED + mww 0xE01FC08C 0x00000055 ;# PLLFEED } # Disable PLL (as it might already be enabled at this time!) - mww 0xE01FC080 0x00000000 # PLLCON: disable PLL - mww 0xE01FC08C 0x000000AA # PLLFEED - mww 0xE01FC08C 0x00000055 # PLLFEED + mww 0xE01FC080 0x00000000 ;# PLLCON: disable PLL + mww 0xE01FC08C 0x000000AA ;# PLLFEED + mww 0xE01FC08C 0x00000055 ;# PLLFEED # Setup PLL to generate 288 MHz from internal RC oscillator - mww 0xE01FC10C 0x00000000 # CLKSRCSEL: IRC - mww 0xE01FC084 0x00000023 # PLLCFG: N=1, M=36 - mww 0xE01FC08C 0x000000AA # PLLFEED - mww 0xE01FC08C 0x00000055 # PLLFEED - mww 0xE01FC080 0x00000001 # PLLCON: enable PLL - mww 0xE01FC08C 0x000000AA # PLLFEED - mww 0xE01FC08C 0x00000055 # PLLFEED + mww 0xE01FC10C 0x00000000 ;# CLKSRCSEL: IRC + mww 0xE01FC084 0x00000023 ;# PLLCFG: N=1, M=36 + mww 0xE01FC08C 0x000000AA ;# PLLFEED + mww 0xE01FC08C 0x00000055 ;# PLLFEED + mww 0xE01FC080 0x00000001 ;# PLLCON: enable PLL + mww 0xE01FC08C 0x000000AA ;# PLLFEED + mww 0xE01FC08C 0x00000055 ;# PLLFEED sleep 100 - mww 0xE01FC104 0x00000003 # CCLKCFG: divide by 4 (72 MHz) - mww 0xE01FC080 0x00000003 # PLLCON: connect PLL - mww 0xE01FC08C 0x000000AA # PLLFEED - mww 0xE01FC08C 0x00000055 # PLLFEED + mww 0xE01FC104 0x00000003 ;# CCLKCFG: divide by 4 (72 MHz) + mww 0xE01FC080 0x00000003 ;# PLLCON: connect PLL + mww 0xE01FC08C 0x000000AA ;# PLLFEED + mww 0xE01FC08C 0x00000055 ;# PLLFEED } @@ -78,71 +78,71 @@ $_TARGETNAME configure -event reset-start { $_TARGETNAME configure -event reset-init { arm core_state arm - arm7_9 dcc_downloads enable # Speed up downloads by using DCC transfer + arm7_9 dcc_downloads enable ;# Speed up downloads by using DCC transfer arm7_9 fast_memory_access enable # Peripheral clocks - mww 0xE01FC0C4 0x04280FFE # PCONP: (reset value) + mww 0xE01FC0C4 0x04280FFE ;# PCONP: (reset value) # Map the user flash to the vector table area (0x00...0x3F) - mww 0xE01FC040 0x00000001 # MEMMAP: User flash + mww 0xE01FC040 0x00000001 ;# MEMMAP: User flash # Memory accelerator module - mww 0xE01FC004 0x00000003 # MAMTIM: 3 clock cycles - mww 0xE01FC000 0x00000002 # MAMCR: fully enabled + mww 0xE01FC004 0x00000003 ;# MAMTIM: 3 clock cycles + mww 0xE01FC000 0x00000002 ;# MAMCR: fully enabled # Enable external memory bus (32-bit SDRAM at DYCS0, 16-bit flash at CS0) - mww 0xE002C014 0x55010115 # PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0, - # P2.20=DYCS0, P2.24=CKEOUT0, P2.28=DQMOUT0, - # P2.29=DQMOUT1, P2.30=DQMOUT2, P2.31=DQMOUT3 - mww 0xE002C018 0x55555555 # PINSEL6: P3.0...P3.15=D0...D15 - mww 0xE002C01C 0x55555555 # PINSEL7: P3.16...P3.31=D16...D31 - mww 0xE002C020 0x55555555 # PINSEL8: P4.0...P4.15=A0...A15 - mww 0xE002C024 0x50051555 # PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE, - # P4.25=WE, P4.30=CS0, P4.31=CS1 - mww 0xFFE08000 0x00000001 # EMCControl: Enable EMC + mww 0xE002C014 0x55010115 ;# PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0, + # P2.20=DYCS0, P2.24=CKEOUT0, P2.28=DQMOUT0, + # P2.29=DQMOUT1, P2.30=DQMOUT2, P2.31=DQMOUT3 + mww 0xE002C018 0x55555555 ;# PINSEL6: P3.0...P3.15=D0...D15 + mww 0xE002C01C 0x55555555 ;# PINSEL7: P3.16...P3.31=D16...D31 + mww 0xE002C020 0x55555555 ;# PINSEL8: P4.0...P4.15=A0...A15 + mww 0xE002C024 0x50051555 ;# PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE, + # P4.25=WE, P4.30=CS0, P4.31=CS1 + mww 0xFFE08000 0x00000001 ;# EMCControl: Enable EMC # Start PLL, then use faster JTAG clock enable_pll jtag_rclk 3000 # 16-bit flash @ CS0 (SST39VF3201-70) - mww 0xFFE08200 0x00080081 # EMCStaticConfig0: 16 bit, PB=1, buffers on - mww 0xFFE08204 0x00000000 # EMCStaticWaitWen0 - mww 0xFFE08208 0x00000000 # EMCStaticWaitOen0 - mww 0xFFE0820C 0x00000005 # EMCStaticWaitRd0 - mww 0xFFE08210 0x00000005 # EMCStaticWaitPage0 - mww 0xFFE08214 0x00000003 # EMCStaticWaitWr0 - mww 0xFFE08218 0x00000001 # EMCStaticWaitTurn0 + mww 0xFFE08200 0x00080081 ;# EMCStaticConfig0: 16 bit, PB=1, buffers on + mww 0xFFE08204 0x00000000 ;# EMCStaticWaitWen0 + mww 0xFFE08208 0x00000000 ;# EMCStaticWaitOen0 + mww 0xFFE0820C 0x00000005 ;# EMCStaticWaitRd0 + mww 0xFFE08210 0x00000005 ;# EMCStaticWaitPage0 + mww 0xFFE08214 0x00000003 ;# EMCStaticWaitWr0 + mww 0xFFE08218 0x00000001 ;# EMCStaticWaitTurn0 # 8-bit NAND @ CS1 # TODO # 32-bit SDRAM @ DYCS0 (K4M563233G-HN75) - mww 0xFFE08028 0x00000001 # EMCDynamicReadConfig - mww 0xFFE08030 0x00000001 # EMCDynamicRP - mww 0xFFE08034 0x00000003 # EMCDynamicRAS - mww 0xFFE08038 0x00000005 # EMCDynamicSREX - mww 0xFFE0803C 0x00000001 # EMCDynamicAPR - mww 0xFFE08040 0x00000005 # EMCDynamicDAL - mww 0xFFE08044 0x00000001 # EMCDynamicWR - mww 0xFFE08048 0x00000005 # EMCDynamicRC - mww 0xFFE0804C 0x00000005 # EMCDynamicRFC - mww 0xFFE08050 0x00000005 # EMCDynamicXSR - mww 0xFFE08054 0x00000001 # EMCDynamicRRD - mww 0xFFE08058 0x00000001 # EMCDynamicMRD + mww 0xFFE08028 0x00000001 ;# EMCDynamicReadConfig + mww 0xFFE08030 0x00000001 ;# EMCDynamicRP + mww 0xFFE08034 0x00000003 ;# EMCDynamicRAS + mww 0xFFE08038 0x00000005 ;# EMCDynamicSREX + mww 0xFFE0803C 0x00000001 ;# EMCDynamicAPR + mww 0xFFE08040 0x00000005 ;# EMCDynamicDAL + mww 0xFFE08044 0x00000001 ;# EMCDynamicWR + mww 0xFFE08048 0x00000005 ;# EMCDynamicRC + mww 0xFFE0804C 0x00000005 ;# EMCDynamicRFC + mww 0xFFE08050 0x00000005 ;# EMCDynamicXSR + mww 0xFFE08054 0x00000001 ;# EMCDynamicRRD + mww 0xFFE08058 0x00000001 ;# EMCDynamicMRD # - mww 0xFFE08104 0x00000202 # EMCDynamicRasCas0 - mww 0xFFE08100 0x00005488 # EMCDynamicConfig0 + mww 0xFFE08104 0x00000202 ;# EMCDynamicRasCas0 + mww 0xFFE08100 0x00005488 ;# EMCDynamicConfig0 sleep 100 - mww 0xFFE08020 0x00000183 # EMCDynamicControl: Clock on continuously, NOP + mww 0xFFE08020 0x00000183 ;# EMCDynamicControl: Clock on continuously, NOP sleep 10 - mww 0xFFE08020 0x00000103 # EMCDynamicControl: PRECHARGE-ALL - mww 0xFFE08024 0x00000046 # EMCDynamicRefresh + mww 0xFFE08020 0x00000103 ;# EMCDynamicControl: PRECHARGE-ALL + mww 0xFFE08024 0x00000046 ;# EMCDynamicRefresh sleep 100 - mww 0xFFE08020 0x00000083 # EMCDynamicControl: MODE - mdw 0xA0011000 1 # Set SDRAM mode register - mww 0xFFE08020 0x00000000 # EMCDynamicControl: NORMAL - mww 0xFFE08100 0x00085488 # EMCDynamicConfig0: Enable buffers + mww 0xFFE08020 0x00000083 ;# EMCDynamicControl: MODE + mdw 0xA0011000 1 ;# Set SDRAM mode register + mww 0xFFE08020 0x00000000 ;# EMCDynamicControl: NORMAL + mww 0xFFE08100 0x00085488 ;# EMCDynamicConfig0: Enable buffers } diff --git a/tcl/board/hitex_lpc2929.cfg b/tcl/board/hitex_lpc2929.cfg index 13d38729..d2515371 100644 --- a/tcl/board/hitex_lpc2929.cfg +++ b/tcl/board/hitex_lpc2929.cfg @@ -34,73 +34,73 @@ flash bank $_FLASHNAME cfi 0x5C000000 0x400000 2 2 $_TARGETNAME jedec_probe $_TARGETNAME configure -event reset-init { # Flash - mww 0x20200010 0x00000007 # FBWST: 7 wait states, not chached + mww 0x20200010 0x00000007 ;# FBWST: 7 wait states, not chached # Use PLL - mww 0xFFFF8020 0x00000001 # XTAL_OSC_CONTROL: enable, 1-20 MHz - mww 0xFFFF8070 0x01000000 # SYS_CLK_CONF: Crystal - mww 0xFFFF8028 0x00000005 # PLL: (power down) - mww 0xFFFF8028 0x01060004 # PLL: M=7, 2P=2 (power up) - # --> f=112 MHz, fcco=224 MHz + mww 0xFFFF8020 0x00000001 ;# XTAL_OSC_CONTROL: enable, 1-20 MHz + mww 0xFFFF8070 0x01000000 ;# SYS_CLK_CONF: Crystal + mww 0xFFFF8028 0x00000005 ;# PLL: (power down) + mww 0xFFFF8028 0x01060004 ;# PLL: M=7, 2P=2 (power up) + # --> f=112 MHz, fcco=224 MHz sleep 100 - mww 0xFFFF8070 0x02000000 # SYS_CLK_CONF: PLL + mww 0xFFFF8070 0x02000000 ;# SYS_CLK_CONF: PLL # Increase JTAG speed adapter_khz 6000 # Enable external memory bus (16-bit SRAM at CS6, 16-bit flash at CS7) - mww 0xE0001138 0x0000001F # P1.14 = D0 - mww 0xE000113C 0x0000001F # P1.15 = D1 - mww 0xE0001140 0x0000001F # P1.16 = D2 - mww 0xE0001144 0x0000001F # P1.17 = D3 - mww 0xE0001148 0x0000001F # P1.18 = D4 - mww 0xE000114C 0x0000001F # P1.19 = D5 - mww 0xE0001150 0x0000001F # P1.20 = D6 - mww 0xE0001154 0x0000001F # P1.21 = D7 - mww 0xE0001200 0x0000001F # P2.0 = D8 - mww 0xE0001204 0x0000001F # P2.1 = D9 - mww 0xE0001208 0x0000001F # P2.2 = D10 - mww 0xE000120C 0x0000001F # P2.3 = D11 - mww 0xE0001210 0x0000001F # P2.4 = D12 - mww 0xE0001214 0x0000001F # P2.5 = D13 - mww 0xE0001218 0x0000001F # P2.6 = D14 - mww 0xE000121C 0x0000001F # P2.7 = D15 - mww 0xE0001104 0x00000007 # P1.1 = A1 - mww 0xE0001108 0x00000007 # P1.2 = A2 - mww 0xE000110C 0x00000007 # P1.3 = A3 - mww 0xE0001110 0x00000007 # P1.4 = A4 - mww 0xE0001114 0x00000007 # P1.5 = A5 - mww 0xE0001118 0x00000007 # P1.6 = A6 - mww 0xE000111C 0x00000007 # P1.7 = A7 - mww 0xE0001028 0x00000007 # P0.10 = A8 - mww 0xE000102C 0x00000007 # P0.11 = A9 - mww 0xE0001030 0x00000007 # P0.12 = A10 - mww 0xE0001034 0x00000007 # P0.13 = A11 - mww 0xE0001038 0x00000007 # P0.14 = A12 - mww 0xE000103C 0x00000007 # P0.15 = A13 - mww 0xE0001048 0x00000007 # P0.18 = A14 - mww 0xE000104C 0x00000007 # P0.19 = A15 - mww 0xE0001050 0x00000007 # P0.20 = A16 - mww 0xE0001054 0x00000007 # P0.21 = A17 - mww 0xE0001058 0x00000007 # P0.22 = A18 - mww 0xE000105C 0x00000007 # P0.23 = A19 - mww 0xE0001238 0x00000007 # P2.14 = BLS0 - mww 0xE000123C 0x00000007 # P2.15 = BLS1 - mww 0xE0001300 0x00000007 # P3.0 = CS6 - mww 0xE0001304 0x00000007 # P3.1 = CS7 - mww 0xE0001130 0x00000007 # P1.12 = OE_N - mww 0xE0001134 0x00000007 # P1.13 = WE_N - mww 0x600000BC 0x00000041 # Bank6 16-bit mode, RBLE=1 - mww 0x600000B4 0x00000000 # Bank6 WSTOEN=0 - mww 0x600000AC 0x00000005 # Bank6 WST1=5 - mww 0x600000B8 0x00000001 # Bank6 WSTWEN=1 - mww 0x600000B0 0x00000006 # Bank6 WST2=6 - mww 0x600000A8 0x00000002 # Bank6 IDCY=2 - mww 0x600000D8 0x00000041 # Bank7 16-bit mode, RBLE=1 - mww 0x600000D0 0x00000000 # Bank7 WSTOEN=0 - mww 0x600000C8 0x0000000A # Bank7 WST1=10 - mww 0x600000D4 0x00000001 # Bank7 WSTWEN=1 - mww 0x600000CC 0x0000000C # Bank7 WST2=8 - mww 0x600000C4 0x00000002 # Bank7 IDCY=2 + mww 0xE0001138 0x0000001F ;# P1.14 = D0 + mww 0xE000113C 0x0000001F ;# P1.15 = D1 + mww 0xE0001140 0x0000001F ;# P1.16 = D2 + mww 0xE0001144 0x0000001F ;# P1.17 = D3 + mww 0xE0001148 0x0000001F ;# P1.18 = D4 + mww 0xE000114C 0x0000001F ;# P1.19 = D5 + mww 0xE0001150 0x0000001F ;# P1.20 = D6 + mww 0xE0001154 0x0000001F ;# P1.21 = D7 + mww 0xE0001200 0x0000001F ;# P2.0 = D8 + mww 0xE0001204 0x0000001F ;# P2.1 = D9 + mww 0xE0001208 0x0000001F ;# P2.2 = D10 + mww 0xE000120C 0x0000001F ;# P2.3 = D11 + mww 0xE0001210 0x0000001F ;# P2.4 = D12 + mww 0xE0001214 0x0000001F ;# P2.5 = D13 + mww 0xE0001218 0x0000001F ;# P2.6 = D14 + mww 0xE000121C 0x0000001F ;# P2.7 = D15 + mww 0xE0001104 0x00000007 ;# P1.1 = A1 + mww 0xE0001108 0x00000007 ;# P1.2 = A2 + mww 0xE000110C 0x00000007 ;# P1.3 = A3 + mww 0xE0001110 0x00000007 ;# P1.4 = A4 + mww 0xE0001114 0x00000007 ;# P1.5 = A5 + mww 0xE0001118 0x00000007 ;# P1.6 = A6 + mww 0xE000111C 0x00000007 ;# P1.7 = A7 + mww 0xE0001028 0x00000007 ;# P0.10 = A8 + mww 0xE000102C 0x00000007 ;# P0.11 = A9 + mww 0xE0001030 0x00000007 ;# P0.12 = A10 + mww 0xE0001034 0x00000007 ;# P0.13 = A11 + mww 0xE0001038 0x00000007 ;# P0.14 = A12 + mww 0xE000103C 0x00000007 ;# P0.15 = A13 + mww 0xE0001048 0x00000007 ;# P0.18 = A14 + mww 0xE000104C 0x00000007 ;# P0.19 = A15 + mww 0xE0001050 0x00000007 ;# P0.20 = A16 + mww 0xE0001054 0x00000007 ;# P0.21 = A17 + mww 0xE0001058 0x00000007 ;# P0.22 = A18 + mww 0xE000105C 0x00000007 ;# P0.23 = A19 + mww 0xE0001238 0x00000007 ;# P2.14 = BLS0 + mww 0xE000123C 0x00000007 ;# P2.15 = BLS1 + mww 0xE0001300 0x00000007 ;# P3.0 = CS6 + mww 0xE0001304 0x00000007 ;# P3.1 = CS7 + mww 0xE0001130 0x00000007 ;# P1.12 = OE_N + mww 0xE0001134 0x00000007 ;# P1.13 = WE_N + mww 0x600000BC 0x00000041 ;# Bank6 16-bit mode, RBLE=1 + mww 0x600000B4 0x00000000 ;# Bank6 WSTOEN=0 + mww 0x600000AC 0x00000005 ;# Bank6 WST1=5 + mww 0x600000B8 0x00000001 ;# Bank6 WSTWEN=1 + mww 0x600000B0 0x00000006 ;# Bank6 WST2=6 + mww 0x600000A8 0x00000002 ;# Bank6 IDCY=2 + mww 0x600000D8 0x00000041 ;# Bank7 16-bit mode, RBLE=1 + mww 0x600000D0 0x00000000 ;# Bank7 WSTOEN=0 + mww 0x600000C8 0x0000000A ;# Bank7 WST1=10 + mww 0x600000D4 0x00000001 ;# Bank7 WSTWEN=1 + mww 0x600000CC 0x0000000C ;# Bank7 WST2=8 + mww 0x600000C4 0x00000002 ;# Bank7 IDCY=2 } diff --git a/tcl/board/imx35pdk.cfg b/tcl/board/imx35pdk.cfg index 73fa6331..b5aa752f 100644 --- a/tcl/board/imx35pdk.cfg +++ b/tcl/board/imx35pdk.cfg @@ -27,8 +27,8 @@ proc imx35pdk_init { } { mww 0x53f00004 0x77777777 # clock setup - mww 0x53F80004 0x00821000 # first need to set IPU_HND_BYP - mww 0x53F80004 0x00821000 #arm clock is 399Mhz and ahb clock is 133Mhz. + mww 0x53F80004 0x00821000 ;# first need to set IPU_HND_BYP + mww 0x53F80004 0x00821000 ;#arm clock is 399Mhz and ahb clock is 133Mhz. #================================================= # WEIM config @@ -122,8 +122,8 @@ proc imx35pdk_init { } { mww 0x43FAC474 0x00000006 mww 0x43FAC478 0x00000006 mww 0x43FAC47c 0x00000006 - mww 0x43FAC480 0x00000006 # CSD0 - mww 0x43FAC484 0x00000006 # CSD1 + mww 0x43FAC480 0x00000006 ;# CSD0 + mww 0x43FAC484 0x00000006 ;# CSD1 mww 0x43FAC488 0x00000006 mww 0x43FAC48c 0x00000006 mww 0x43FAC490 0x00000006 @@ -131,12 +131,12 @@ proc imx35pdk_init { } { mww 0x43FAC498 0x00000006 mww 0x43FAC49c 0x00000006 mww 0x43FAC4A0 0x00000006 - mww 0x43FAC4A4 0x00000006 # RAS - mww 0x43FAC4A8 0x00000006 # CAS - mww 0x43FAC4Ac 0x00000006 # SDWE - mww 0x43FAC4B0 0x00000006 # SDCKE0 - mww 0x43FAC4B4 0x00000006 # SDCKE1 - mww 0x43FAC4B8 0x00000002 # SDCLK + mww 0x43FAC4A4 0x00000006 ;# RAS + mww 0x43FAC4A8 0x00000006 ;# CAS + mww 0x43FAC4Ac 0x00000006 ;# SDWE + mww 0x43FAC4B0 0x00000006 ;# SDCKE0 + mww 0x43FAC4B4 0x00000006 ;# SDCKE1 + mww 0x43FAC4B8 0x00000002 ;# SDCLK # SDQS0 through SDQS3 mww 0x43FAC4Bc 0x00000082 @@ -211,7 +211,7 @@ proc imx35pdk_init { } { # DDR2 : Load reg EMR1 -- OCD default mwb 0x82000780 0xda # DDR2 : Load reg EMR1 -- OCD exit - mwb 0x82000400 0xda # ODT disabled + mwb 0x82000400 0xda ;# ODT disabled # ESD_ESDCTL0 : select normal-operation mode # DSIZ=32-bit, BL=8, COL=10-bit, ROW=13-bit @@ -229,10 +229,10 @@ proc imx35pdk_init { } { # Adjust the ESDCDLY5 register #*********************************************** # Vary DQS_ABS_OFFSET5 for writes - mww 0xB8001020 0x00F48000 # this is the default value - mww 0xB8001024 0x00F48000 # this is the default value - mww 0xB8001028 0x00F48000 # this is the default value - mww 0xB800102c 0x00F48000 # this is the default value + mww 0xB8001020 0x00F48000 ;# this is the default value + mww 0xB8001024 0x00F48000 ;# this is the default value + mww 0xB8001028 0x00F48000 ;# this is the default value + mww 0xB800102c 0x00F48000 ;# this is the default value #Then you can make force measure with the dedicated bit (Bit 7 at ESDMISC) diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg index 16889654..c5adac36 100644 --- a/tcl/board/mini2440.cfg +++ b/tcl/board/mini2440.cfg @@ -182,10 +182,10 @@ proc init_2440 { } { # usb clock are off 12mHz xtal #----------------------------------------------- - mww phys 0x4C000014 0x00000005 # Clock Divider control Reg - mww phys 0x4C000000 0xFFFFFFFF # LOCKTIME count register - mww phys 0x4C000008 0x00038022 # UPPLCON USB clock config Reg - mww phys 0x4C000004 0x0007F021 # MPPLCON Proc clock config Reg + mww phys 0x4C000014 0x00000005 ;# Clock Divider control Reg + mww phys 0x4C000000 0xFFFFFFFF ;# LOCKTIME count register + mww phys 0x4C000008 0x00038022 ;# UPPLCON USB clock config Reg + mww phys 0x4C000004 0x0007F021 ;# MPPLCON Proc clock config Reg #----------------------------------------------- # Configure Memory controller @@ -193,45 +193,45 @@ proc init_2440 { } { # DRAM - 64MB - 32 bit bus, uses BANKCON6 BANKCON7 #----------------------------------------------- - mww phys 0x48000000 0x22111112 # BWSCON - Bank and Bus Width - mww phys 0x48000010 0x00001112 # BANKCON4 - ? - mww phys 0x4800001c 0x00018009 # BANKCON6 - DRAM - mww phys 0x48000020 0x00018009 # BANKCON7 - DRAM - mww phys 0x48000024 0x008E04EB # REFRESH - DRAM - mww phys 0x48000028 0x000000B2 # BANKSIZE - DRAM - mww phys 0x4800002C 0x00000030 # MRSRB6 - DRAM - mww phys 0x48000030 0x00000030 # MRSRB7 - DRAM + mww phys 0x48000000 0x22111112 ;# BWSCON - Bank and Bus Width + mww phys 0x48000010 0x00001112 ;# BANKCON4 - ? + mww phys 0x4800001c 0x00018009 ;# BANKCON6 - DRAM + mww phys 0x48000020 0x00018009 ;# BANKCON7 - DRAM + mww phys 0x48000024 0x008E04EB ;# REFRESH - DRAM + mww phys 0x48000028 0x000000B2 ;# BANKSIZE - DRAM + mww phys 0x4800002C 0x00000030 ;# MRSRB6 - DRAM + mww phys 0x48000030 0x00000030 ;# MRSRB7 - DRAM #----------------------------------------------- # Now port configuration for enables for memory # and other stuff. #----------------------------------------------- - mww phys 0x56000000 0x007FFFFF # GPACON + mww phys 0x56000000 0x007FFFFF ;# GPACON - mww phys 0x56000010 0x00295559 # GPBCON - mww phys 0x56000018 0x000003FF # GPBUP (PULLUP ENABLE) - mww phys 0x56000014 0x000007C2 # GPBDAT + mww phys 0x56000010 0x00295559 ;# GPBCON + mww phys 0x56000018 0x000003FF ;# GPBUP (PULLUP ENABLE) + mww phys 0x56000014 0x000007C2 ;# GPBDAT - mww phys 0x56000020 0xAAAAA6AA # GPCCON - mww phys 0x56000028 0x0000FFFF # GPCUP - mww phys 0x56000024 0x00000020 # GPCDAT + mww phys 0x56000020 0xAAAAA6AA ;# GPCCON + mww phys 0x56000028 0x0000FFFF ;# GPCUP + mww phys 0x56000024 0x00000020 ;# GPCDAT - mww phys 0x56000030 0xAAAAAAAA # GPDCON - mww phys 0x56000038 0x0000FFFF # GPDUP + mww phys 0x56000030 0xAAAAAAAA ;# GPDCON + mww phys 0x56000038 0x0000FFFF ;# GPDUP - mww phys 0x56000040 0xAAAAAAAA # GPECON - mww phys 0x56000048 0x0000FFFF # GPEUP + mww phys 0x56000040 0xAAAAAAAA ;# GPECON + mww phys 0x56000048 0x0000FFFF ;# GPEUP - mww phys 0x56000050 0x00001555 # GPFCON - mww phys 0x56000058 0x0000007F # GPFUP - mww phys 0x56000054 0x00000000 # GPFDAT + mww phys 0x56000050 0x00001555 ;# GPFCON + mww phys 0x56000058 0x0000007F ;# GPFUP + mww phys 0x56000054 0x00000000 ;# GPFDAT - mww phys 0x56000060 0x00150114 # GPGCON - mww phys 0x56000068 0x0000007F # GPGUP + mww phys 0x56000060 0x00150114 ;# GPGCON + mww phys 0x56000068 0x0000007F ;# GPGUP - mww phys 0x56000070 0x0015AAAA # GPHCON - mww phys 0x56000078 0x000003FF # GPGUP + mww phys 0x56000070 0x0015AAAA ;# GPHCON + mww phys 0x56000078 0x000003FF ;# GPGUP } diff --git a/tcl/board/olimex_sam9_l9260.cfg b/tcl/board/olimex_sam9_l9260.cfg index 5c16ed2f..ad2f850a 100644 --- a/tcl/board/olimex_sam9_l9260.cfg +++ b/tcl/board/olimex_sam9_l9260.cfg @@ -30,43 +30,43 @@ $_TARGETNAME configure -event reset-start { } $_TARGETNAME configure -event reset-init { - mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog + mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog ## # Clock configuration for 99.328 MHz main clock. ## echo "Setting up clock" - mww 0xfffffc20 0x00004001 # CKGR_MOR : enable main oscillator, 512 slow clock startup - sleep 20 # wait 20 ms (need 15.6 ms for startup) - mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator (18.432 MHz) - sleep 10 # wait 10 ms - mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR : 18.432 MHz / 9 * 97 = 198.656 MHz, 63 slow clock startup - sleep 20 # wait 20 ms (need 1.9 ms for startup) - mww 0xfffffc30 0x00000101 # PMC_MCKR : no scale on proc clock, master is proc / 2 - sleep 10 # wait 10 ms - mww 0xfffffc30 0x00000102 # PMC_MCKR : switch to PLLA (99.328 MHz) + mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable main oscillator, 512 slow clock startup + sleep 20 ;# wait 20 ms (need 15.6 ms for startup) + mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator (18.432 MHz) + sleep 10 ;# wait 10 ms + mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR : 18.432 MHz / 9 * 97 = 198.656 MHz, 63 slow clock startup + sleep 20 ;# wait 20 ms (need 1.9 ms for startup) + mww 0xfffffc30 0x00000101 ;# PMC_MCKR : no scale on proc clock, master is proc / 2 + sleep 10 ;# wait 10 ms + mww 0xfffffc30 0x00000102 ;# PMC_MCKR : switch to PLLA (99.328 MHz) # Increase JTAG speed to 6 MHz if RCLK is not supported. jtag_rclk 6000 - arm7_9 dcc_downloads enable # Enable faster DCC downloads. + arm7_9 dcc_downloads enable ;# Enable faster DCC downloads. ## # SDRAM configuration for 2 x Samsung K4S561632J-UC75, 4M x 16Bit x 4 Banks. ## echo "Configuring SDRAM" - mww 0xfffff870 0xffff0000 # PIOC_ASR : select peripheral function for D15..D31 - mww 0xfffff804 0xffff0000 # PIOC_PDR : disable PIO function for D15..D31 + mww 0xfffff870 0xffff0000 ;# PIOC_ASR : select peripheral function for D15..D31 + mww 0xfffff804 0xffff0000 ;# PIOC_PDR : disable PIO function for D15..D31 - mww 0xffffef1c 0x00010002 # EBI_CSA : assign EBI CS1 to SDRAM, VDDIOMSEL set for +3V3 memory + mww 0xffffef1c 0x00010002 ;# EBI_CSA : assign EBI CS1 to SDRAM, VDDIOMSEL set for +3V3 memory - mww 0xffffea08 0x85237259 # SDRAMC_CR : configure SDRAM for Samsung chips + mww 0xffffea08 0x85237259 ;# SDRAMC_CR : configure SDRAM for Samsung chips - mww 0xffffea00 0x1 # SDRAMC_MR : issue NOP command + mww 0xffffea00 0x1 ;# SDRAMC_MR : issue NOP command mww 0x20000000 0 - mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' command + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' command mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 @@ -82,12 +82,12 @@ $_TARGETNAME configure -event reset-init { mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 - mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command mww 0x20000000 0 - mww 0xffffea00 0x0 # SDRAMC_MR : normal mode + mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode mww 0x20000000 0 - mww 0xffffea04 0x2b6 # SDRAMC_TR : set refresh timer count to 7 us + mww 0xffffea04 0x2b6 ;# SDRAMC_TR : set refresh timer count to 7 us ## # NAND Flash Configuration for 1 x Samsung K9F4G08U0M, 512M x 8Bit. diff --git a/tcl/board/openrd.cfg b/tcl/board/openrd.cfg index 6371effa..14593fd4 100644 --- a/tcl/board/openrd.cfg +++ b/tcl/board/openrd.cfg @@ -31,72 +31,72 @@ proc openrd_init { } { arm mcr 15 0 0 1 0 0x00052078 - mww 0xD0001400 0x43000C30 # DDR SDRAM Configuration Register - mww 0xD0001404 0x37543000 # Dunit Control Low Register - mww 0xD0001408 0x22125451 # DDR SDRAM Timing (Low) Register - mww 0xD000140C 0x00000A33 # DDR SDRAM Timing (High) Register - mww 0xD0001410 0x000000CC # DDR SDRAM Address Control Register - mww 0xD0001414 0x00000000 # DDR SDRAM Open Pages Control Register - mww 0xD0001418 0x00000000 # DDR SDRAM Operation Register - mww 0xD000141C 0x00000C52 # DDR SDRAM Mode Register - mww 0xD0001420 0x00000004 # DDR SDRAM Extended Mode Register - mww 0xD0001424 0x0000F17F # Dunit Control High Register - mww 0xD0001428 0x00085520 # Dunit Control High Register - mww 0xD000147c 0x00008552 # Dunit Control High Register - mww 0xD0001504 0x0FFFFFF1 # CS0n Size Register - mww 0xD0001508 0x10000000 # CS1n Base Register - mww 0xD000150C 0x0FFFFFF5 # CS1n Size Register - mww 0xD0001514 0x00000000 # CS2n Size Register - mww 0xD000151C 0x00000000 # CS3n Size Register - mww 0xD0001494 0x00120012 # DDR2 SDRAM ODT Control (Low) Register - mww 0xD0001498 0x00000000 # DDR2 SDRAM ODT Control (High) REgister - mww 0xD000149C 0x0000E40F # DDR2 Dunit ODT Control Register - mww 0xD0001480 0x00000001 # DDR SDRAM Initialization Control Register - mww 0xD0020204 0x00000000 # Main IRQ Interrupt Mask Register - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - - mww 0xD0010000 0x01111111 # MPP 0 to 7 - mww 0xD0010004 0x11113322 # MPP 8 to 15 - mww 0xD0010008 0x00001111 # MPP 16 to 23 - - mww 0xD0010418 0x003E07CF # NAND Read Parameters REgister - mww 0xD001041C 0x000F0F0F # NAND Write Parameters Register - mww 0xD0010470 0x01C7D943 # NAND Flash Control Register + mww 0xD0001400 0x43000C30 ;# DDR SDRAM Configuration Register + mww 0xD0001404 0x37543000 ;# Dunit Control Low Register + mww 0xD0001408 0x22125451 ;# DDR SDRAM Timing (Low) Register + mww 0xD000140C 0x00000A33 ;# DDR SDRAM Timing (High) Register + mww 0xD0001410 0x000000CC ;# DDR SDRAM Address Control Register + mww 0xD0001414 0x00000000 ;# DDR SDRAM Open Pages Control Register + mww 0xD0001418 0x00000000 ;# DDR SDRAM Operation Register + mww 0xD000141C 0x00000C52 ;# DDR SDRAM Mode Register + mww 0xD0001420 0x00000004 ;# DDR SDRAM Extended Mode Register + mww 0xD0001424 0x0000F17F ;# Dunit Control High Register + mww 0xD0001428 0x00085520 ;# Dunit Control High Register + mww 0xD000147c 0x00008552 ;# Dunit Control High Register + mww 0xD0001504 0x0FFFFFF1 ;# CS0n Size Register + mww 0xD0001508 0x10000000 ;# CS1n Base Register + mww 0xD000150C 0x0FFFFFF5 ;# CS1n Size Register + mww 0xD0001514 0x00000000 ;# CS2n Size Register + mww 0xD000151C 0x00000000 ;# CS3n Size Register + mww 0xD0001494 0x00120012 ;# DDR2 SDRAM ODT Control (Low) Register + mww 0xD0001498 0x00000000 ;# DDR2 SDRAM ODT Control (High) REgister + mww 0xD000149C 0x0000E40F ;# DDR2 Dunit ODT Control Register + mww 0xD0001480 0x00000001 ;# DDR SDRAM Initialization Control Register + mww 0xD0020204 0x00000000 ;# Main IRQ Interrupt Mask Register + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + + mww 0xD0010000 0x01111111 ;# MPP 0 to 7 + mww 0xD0010004 0x11113322 ;# MPP 8 to 15 + mww 0xD0010008 0x00001111 ;# MPP 16 to 23 + + mww 0xD0010418 0x003E07CF ;# NAND Read Parameters REgister + mww 0xD001041C 0x000F0F0F ;# NAND Write Parameters Register + mww 0xD0010470 0x01C7D943 ;# NAND Flash Control Register } diff --git a/tcl/board/propox_mmnet1001.cfg b/tcl/board/propox_mmnet1001.cfg index 89726339..39ae5cbc 100644 --- a/tcl/board/propox_mmnet1001.cfg +++ b/tcl/board/propox_mmnet1001.cfg @@ -14,70 +14,70 @@ proc at91sam_init { } { jtag_rclk 4 # Enable user reset and disable watchdog - mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset - mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog + mww 0xfffffd08 0xa5000501 ;# RSTC_MR : enable user reset + mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog # Oscillator setup - mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator (18.432 MHz) - sleep 20 # wait 20 ms - mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator - sleep 10 # wait 10 ms + mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator (18.432 MHz) + sleep 20 ;# wait 20 ms + mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator + sleep 10 ;# wait 10 ms # now we are running at 18.432 MHz kHz => 1/8 * 18.432 MHz = 2.304 MHz jtag_rclk 2000 - mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz - sleep 20 # wait 20 ms - mww 0xfffffc2c 0x207c3f0c # CKGR_PLLBR: Set PLLB Register for USB usage (USB_CLK = 48 MHz) - sleep 10 # wait 10 ms - mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler - sleep 10 # wait 10 ms - mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected - sleep 10 # wait 10 ms + mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR: Set PLLA Register for 198,656MHz + sleep 20 ;# wait 20 ms + mww 0xfffffc2c 0x207c3f0c ;# CKGR_PLLBR: Set PLLB Register for USB usage (USB_CLK = 48 MHz) + sleep 10 ;# wait 10 ms + mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler + sleep 10 ;# wait 10 ms + mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected + sleep 10 ;# wait 10 ms # now we are running at 198.656 MHz kHz => full speed jtag jtag_rclk 30000 - arm7_9 dcc_downloads enable # Enable faster DCC downloads + arm7_9 dcc_downloads enable ;# Enable faster DCC downloads # Configure PIO Controller for SDRAM data-lines D16-D31 # PC16-PC31 = Peripheral A: D16-D32 - mww 0xfffff844 0xffff0000 # Interrupt Disable - mww 0xfffff854 0xffff0000 # Multi-Drive Disable - mww 0xfffff860 0xffff0000 # Pull-Up Disable - mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral A function for D15..D31 - mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 (Peripheral function enable) - mww 0xfffffc10 0x00000010 # Enable PIO-C Clock in PMC (PID=4) + mww 0xfffff844 0xffff0000 ;# Interrupt Disable + mww 0xfffff854 0xffff0000 ;# Multi-Drive Disable + mww 0xfffff860 0xffff0000 ;# Pull-Up Disable + mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral A function for D15..D31 + mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31 (Peripheral function enable) + mww 0xfffffc10 0x00000010 ;# Enable PIO-C Clock in PMC (PID=4) # SD-Ram setup - mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM - mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (IS42S32160A: 4M Words x 32 Bits x 4 Banks (512-Mbit)) - mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command + mww 0xffffef1c 0x2 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM + mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (IS42S32160A: 4M Words x 32 Bits x 4 Banks (512-Mbit)) + mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command mww 0x20000000 0 - mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (1st) + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (1st) mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (2nd) + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (2nd) mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (3th) + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (3th) mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (4th) + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (4th) mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (5th) + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (5th) mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (6th) + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (6th) mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (7th) + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (7th) mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (8th) + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (8th) mww 0x20000000 0 - mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command mww 0x20000000 0 - mww 0xffffea00 0x0 # SDRAMC_MR : Normal Mode + mww 0xffffea00 0x0 ;# SDRAMC_MR : Normal Mode mww 0x20000000 0 - mww 0xFFFFEA04 0x30d # SDRAM Refresh Time Register - # datasheet: 8k refresh cycles / 64 ms - # MCLK / (8*1024 / 64e-3) = 100e6 / 128000 = 781 = 0x30d + mww 0xFFFFEA04 0x30d ;# SDRAM Refresh Time Register + # datasheet: 8k refresh cycles / 64 ms + # MCLK / (8*1024 / 64e-3) = 100e6 / 128000 = 781 = 0x30d } diff --git a/tcl/board/pxa255_sst.cfg b/tcl/board/pxa255_sst.cfg index 44f34ca1..49cad5db 100644 --- a/tcl/board/pxa255_sst.cfg +++ b/tcl/board/pxa255_sst.cfg @@ -17,75 +17,75 @@ set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME cfi 0x00000000 0x80000 2 2 $_TARGETNAME jedec_probe proc pxa255_sst_init {} { - xscale cp15 15 0x00002001 #Enable CP0 and CP13 access + xscale cp15 15 0x00002001 ;#Enable CP0 and CP13 access # # setup GPIO # - mww 0x40E00018 0x00008000 #CPSR0 + mww 0x40E00018 0x00008000 ;#CPSR0 sleep 20 - mww 0x40E0001C 0x00000002 #GPSR1 + mww 0x40E0001C 0x00000002 ;#GPSR1 sleep 20 - mww 0x40E00020 0x00000008 #GPSR2 + mww 0x40E00020 0x00000008 ;#GPSR2 sleep 20 - mww 0x40E0000C 0x00008000 #GPDR0 + mww 0x40E0000C 0x00008000 ;#GPDR0 sleep 20 - mww 0x40E00054 0x80000000 #GAFR0_L + mww 0x40E00054 0x80000000 ;#GAFR0_L sleep 20 - mww 0x40E00058 0x00188010 #GAFR0_H + mww 0x40E00058 0x00188010 ;#GAFR0_H sleep 20 - mww 0x40E0005C 0x60908018 #GAFR1_L + mww 0x40E0005C 0x60908018 ;#GAFR1_L sleep 20 - mww 0x40E0000C 0x0280E000 #GPDR0 + mww 0x40E0000C 0x0280E000 ;#GPDR0 sleep 20 - mww 0x40E00010 0x821C88B2 #GPDR1 + mww 0x40E00010 0x821C88B2 ;#GPDR1 sleep 20 - mww 0x40E00014 0x000F03DB #GPDR2 + mww 0x40E00014 0x000F03DB ;#GPDR2 sleep 20 - mww 0x40E00000 0x000F03DB #GPLR0 + mww 0x40E00000 0x000F03DB ;#GPLR0 sleep 20 - mww 0x40F00004 0x00000020 #PSSR + mww 0x40F00004 0x00000020 ;#PSSR sleep 20 # # setup memory controller # - mww 0x48000008 0x01111998 #MSC0 + mww 0x48000008 0x01111998 ;#MSC0 sleep 20 - mww 0x48000010 0x00047ff0 #MSC2 + mww 0x48000010 0x00047ff0 ;#MSC2 sleep 20 - mww 0x48000014 0x00000000 #MECR + mww 0x48000014 0x00000000 ;#MECR sleep 20 - mww 0x48000028 0x00010504 #MCMEM0 + mww 0x48000028 0x00010504 ;#MCMEM0 sleep 20 - mww 0x4800002C 0x00010504 #MCMEM1 + mww 0x4800002C 0x00010504 ;#MCMEM1 sleep 20 - mww 0x48000030 0x00010504 #MCATT0 + mww 0x48000030 0x00010504 ;#MCATT0 sleep 20 - mww 0x48000034 0x00010504 #MCATT1 + mww 0x48000034 0x00010504 ;#MCATT1 sleep 20 - mww 0x48000038 0x00004715 #MCIO0 + mww 0x48000038 0x00004715 ;#MCIO0 sleep 20 - mww 0x4800003C 0x00004715 #MCIO1 + mww 0x4800003C 0x00004715 ;#MCIO1 sleep 20 # - mww 0x48000004 0x03CA4018 #MDREF + mww 0x48000004 0x03CA4018 ;#MDREF sleep 20 - mww 0x48000004 0x004B4018 #MDREF + mww 0x48000004 0x004B4018 ;#MDREF sleep 20 - mww 0x48000004 0x000B4018 #MDREF + mww 0x48000004 0x000B4018 ;#MDREF sleep 20 - mww 0x48000004 0x000BC018 #MDREF + mww 0x48000004 0x000BC018 ;#MDREF sleep 20 - mww 0x48000000 0x00001AC8 #MDCNFG + mww 0x48000000 0x00001AC8 ;#MDCNFG sleep 20 sleep 20 - mww 0x48000000 0x00001AC9 #MDCNFG + mww 0x48000000 0x00001AC9 ;#MDCNFG sleep 20 - mww 0x48000040 0x00000000 #MDMRS + mww 0x48000040 0x00000000 ;#MDMRS sleep 20 } @@ -96,4 +96,4 @@ reset_config trst_and_srst adapter_nsrst_delay 200 jtag_ntrst_delay 200 -#xscale debug_handler 0 0xFFFF0800 # debug handler base address +#xscale debug_handler 0 0xFFFF0800 ;# debug handler base address diff --git a/tcl/board/rsc-w910.cfg b/tcl/board/rsc-w910.cfg index 423fb8fd..636a0539 100644 --- a/tcl/board/rsc-w910.cfg +++ b/tcl/board/rsc-w910.cfg @@ -34,12 +34,12 @@ $_TARGETNAME configure -event reset-init { # switch on PLL for 200MHz operation # running from 15MHz input clock - mww 0xB0000200 0x00000030 # CLKEN - mww 0xB0000204 0x00000f3c # CLKSEL - mww 0xB0000208 0x05007000 # CLKDIV - mww 0xB000020C 0x00004f24 # PLLCON0 - mww 0xB0000210 0x00002b63 # PLLCON1 - mww 0xB000000C 0x08817fa6 # MFSEL + mww 0xB0000200 0x00000030 ;# CLKEN + mww 0xB0000204 0x00000f3c ;# CLKSEL + mww 0xB0000208 0x05007000 ;# CLKDIV + mww 0xB000020C 0x00004f24 ;# PLLCON0 + mww 0xB0000210 0x00002b63 ;# PLLCON1 + mww 0xB000000C 0x08817fa6 ;# MFSEL sleep 10 # we are now running @ 200MHz @@ -52,15 +52,15 @@ $_TARGETNAME configure -event reset-init { # map nor flash to 0x20000000 # map sdram to 0x00000000 - mww 0xb0001000 0x000530c1 # EBICON - mww 0xb0001004 0x40030084 # ROMCON - mww 0xb0001008 0x000010ee # SDCONF0 - mww 0xb000100C 0x00000000 # SDCONF1 - mww 0xb0001010 0x0000015b # SDTIME0 - mww 0xb0001014 0x0000015b # SDTIME1 - mww 0xb0001018 0x00000000 # EXT0CON - mww 0xb000101C 0x00000000 # EXT1CON - mww 0xb0001020 0x00000000 # EXT2CON - mww 0xb0001024 0x00000000 # EXT3CON - mww 0xb000102c 0x00ff0048 # CKSKEW + mww 0xb0001000 0x000530c1 ;# EBICON + mww 0xb0001004 0x40030084 ;# ROMCON + mww 0xb0001008 0x000010ee ;# SDCONF0 + mww 0xb000100C 0x00000000 ;# SDCONF1 + mww 0xb0001010 0x0000015b ;# SDTIME0 + mww 0xb0001014 0x0000015b ;# SDTIME1 + mww 0xb0001018 0x00000000 ;# EXT0CON + mww 0xb000101C 0x00000000 ;# EXT1CON + mww 0xb0001020 0x00000000 ;# EXT2CON + mww 0xb0001024 0x00000000 ;# EXT3CON + mww 0xb000102c 0x00ff0048 ;# CKSKEW } diff --git a/tcl/board/sheevaplug.cfg b/tcl/board/sheevaplug.cfg index b843213b..e5e9f343 100644 --- a/tcl/board/sheevaplug.cfg +++ b/tcl/board/sheevaplug.cfg @@ -31,72 +31,72 @@ proc sheevaplug_init { } { arm mcr 15 0 0 1 0 0x00052078 - mww 0xD0001400 0x43000C30 # DDR SDRAM Configuration Register - mww 0xD0001404 0x39543000 # Dunit Control Low Register - mww 0xD0001408 0x22125451 # DDR SDRAM Timing (Low) Register - mww 0xD000140C 0x00000833 # DDR SDRAM Timing (High) Register - mww 0xD0001410 0x000000CC # DDR SDRAM Address Control Register - mww 0xD0001414 0x00000000 # DDR SDRAM Open Pages Control Register - mww 0xD0001418 0x00000000 # DDR SDRAM Operation Register - mww 0xD000141C 0x00000C52 # DDR SDRAM Mode Register - mww 0xD0001420 0x00000042 # DDR SDRAM Extended Mode Register - mww 0xD0001424 0x0000F17F # Dunit Control High Register - mww 0xD0001428 0x00085520 # Dunit Control High Register - mww 0xD000147c 0x00008552 # Dunit Control High Register - mww 0xD0001504 0x0FFFFFF1 # CS0n Size Register - mww 0xD0001508 0x10000000 # CS1n Base Register - mww 0xD000150C 0x0FFFFFF5 # CS1n Size Register - mww 0xD0001514 0x00000000 # CS2n Size Register - mww 0xD000151C 0x00000000 # CS3n Size Register - mww 0xD0001494 0x003C0000 # DDR2 SDRAM ODT Control (Low) Register - mww 0xD0001498 0x00000000 # DDR2 SDRAM ODT Control (High) REgister - mww 0xD000149C 0x0000F80F # DDR2 Dunit ODT Control Register - mww 0xD0001480 0x00000001 # DDR SDRAM Initialization Control Register - mww 0xD0020204 0x00000000 # Main IRQ Interrupt Mask Register - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - mww 0xD0020204 0x00000000 # " - - mww 0xD0010000 0x01111111 # MPP 0 to 7 - mww 0xD0010004 0x11113322 # MPP 8 to 15 - mww 0xD0010008 0x00001111 # MPP 16 to 23 - - mww 0xD0010418 0x003E07CF # NAND Read Parameters REgister - mww 0xD001041C 0x000F0F0F # NAND Write Parameters Register - mww 0xD0010470 0x01C7D943 # NAND Flash Control Register + mww 0xD0001400 0x43000C30 ;# DDR SDRAM Configuration Register + mww 0xD0001404 0x39543000 ;# Dunit Control Low Register + mww 0xD0001408 0x22125451 ;# DDR SDRAM Timing (Low) Register + mww 0xD000140C 0x00000833 ;# DDR SDRAM Timing (High) Register + mww 0xD0001410 0x000000CC ;# DDR SDRAM Address Control Register + mww 0xD0001414 0x00000000 ;# DDR SDRAM Open Pages Control Register + mww 0xD0001418 0x00000000 ;# DDR SDRAM Operation Register + mww 0xD000141C 0x00000C52 ;# DDR SDRAM Mode Register + mww 0xD0001420 0x00000042 ;# DDR SDRAM Extended Mode Register + mww 0xD0001424 0x0000F17F ;# Dunit Control High Register + mww 0xD0001428 0x00085520 ;# Dunit Control High Register + mww 0xD000147c 0x00008552 ;# Dunit Control High Register + mww 0xD0001504 0x0FFFFFF1 ;# CS0n Size Register + mww 0xD0001508 0x10000000 ;# CS1n Base Register + mww 0xD000150C 0x0FFFFFF5 ;# CS1n Size Register + mww 0xD0001514 0x00000000 ;# CS2n Size Register + mww 0xD000151C 0x00000000 ;# CS3n Size Register + mww 0xD0001494 0x003C0000 ;# DDR2 SDRAM ODT Control (Low) Register + mww 0xD0001498 0x00000000 ;# DDR2 SDRAM ODT Control (High) REgister + mww 0xD000149C 0x0000F80F ;# DDR2 Dunit ODT Control Register + mww 0xD0001480 0x00000001 ;# DDR SDRAM Initialization Control Register + mww 0xD0020204 0x00000000 ;# Main IRQ Interrupt Mask Register + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + mww 0xD0020204 0x00000000 ;# " + + mww 0xD0010000 0x01111111 ;# MPP 0 to 7 + mww 0xD0010004 0x11113322 ;# MPP 8 to 15 + mww 0xD0010008 0x00001111 ;# MPP 16 to 23 + + mww 0xD0010418 0x003E07CF ;# NAND Read Parameters REgister + mww 0xD001041C 0x000F0F0F ;# NAND Write Parameters Register + mww 0xD0010470 0x01C7D943 ;# NAND Flash Control Register } diff --git a/tcl/board/spear310evb20.cfg b/tcl/board/spear310evb20.cfg index b546eb62..175e153f 100644 --- a/tcl/board/spear310evb20.cfg +++ b/tcl/board/spear310evb20.cfg @@ -42,7 +42,7 @@ if { [info exists BOARD_HAS_SRST] } { $_TARGETNAME configure -event reset-init { spear310evb20_init } proc spear310evb20_init {} { - reg pc 0xffff0020 # loop forever + reg pc 0xffff0020 ;# loop forever sp3xx_clock_default sp3xx_common_init diff --git a/tcl/board/telo.cfg b/tcl/board/telo.cfg index 119373c6..126f388f 100644 --- a/tcl/board/telo.cfg +++ b/tcl/board/telo.cfg @@ -37,7 +37,7 @@ $_TARGETNAME configure -event reset-init { $_TARGETNAME configure -event reset-deassert-post { # Force target into ARM state. -# soft_reset_halt # not implemented on ARM11 +# soft_reset_halt ;# not implemented on ARM11 echo "Detected SRSRT asserted on C100.CPU" } @@ -58,4 +58,4 @@ set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME cfi 0x20000000 0x01000000 2 2 $_TARGETNAME # writing data to memory does not work without this -arm11 memwrite burst disable
\ No newline at end of file +arm11 memwrite burst disable diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg index 333b016b..90c18c48 100644 --- a/tcl/board/topas910.cfg +++ b/tcl/board/topas910.cfg @@ -107,7 +107,7 @@ proc topas910_init { } { } # comment the following out if usinf J-Link, it soes not support DCC -arm7_9 dcc_downloads enable # Enable faster DCC downloads +arm7_9 dcc_downloads enable ;# Enable faster DCC downloads ##################### diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg index 065cd317..2a388d51 100644 --- a/tcl/board/topasa900.cfg +++ b/tcl/board/topasa900.cfg @@ -113,7 +113,7 @@ proc topasa900_init { } { } # comment the following out if usinf J-Link, it soes not support DCC -arm7_9 dcc_downloads enable # Enable faster DCC downloads +arm7_9 dcc_downloads enable ;# Enable faster DCC downloads ##################### diff --git a/tcl/board/unknown_at91sam9260.cfg b/tcl/board/unknown_at91sam9260.cfg index 845de6b9..de49a69f 100644 --- a/tcl/board/unknown_at91sam9260.cfg +++ b/tcl/board/unknown_at91sam9260.cfg @@ -23,46 +23,46 @@ $_TARGETNAME configure -event reset-start { $_TARGETNAME configure -event reset-init { - mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog - - mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator - sleep 20 # wait 20 ms - mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator - sleep 10 # wait 10 ms - mww 0xfffffc28 0x205dbf09 # CKGR_PLLAR: Set PLLA Register for 192.512MHz - sleep 20 # wait 20 ms - mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler (divide by 2) - sleep 10 # wait 10 ms - mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected (96.256 MHz) - sleep 10 # wait 10 ms + mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog + + mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator + sleep 20 ;# wait 20 ms + mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator + sleep 10 ;# wait 10 ms + mww 0xfffffc28 0x205dbf09 ;# CKGR_PLLAR: Set PLLA Register for 192.512MHz + sleep 20 ;# wait 20 ms + mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler (divide by 2) + sleep 10 ;# wait 10 ms + mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected (96.256 MHz) + sleep 10 ;# wait 10 ms # Increase JTAG Speed to 6 MHz if RCLK is not supported jtag_rclk 6000 - arm7_9 dcc_downloads enable # Enable faster DCC downloads + arm7_9 dcc_downloads enable ;# Enable faster DCC downloads - mww 0xffffec00 0x01020102 # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit - mww 0xffffec04 0x09070806 # SMC_PULSE0 - mww 0xffffec08 0x000d000b # SMC_CYCLE0 - mww 0xffffec0c 0x00001003 # SMC_MODE0 + mww 0xffffec00 0x01020102 ;# SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit + mww 0xffffec04 0x09070806 ;# SMC_PULSE0 + mww 0xffffec08 0x000d000b ;# SMC_CYCLE0 + mww 0xffffec0c 0x00001003 ;# SMC_MODE0 - flash probe 0 # Identify flash bank 0 + flash probe 0 ;# Identify flash bank 0 - mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31 - mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 - mww 0xfffff860 0xffff0000 # PIO_PUDR : Disable D15..D31 pull-ups + mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral function for D15..D31 + mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31 + mww 0xfffff860 0xffff0000 ;# PIO_PUDR : Disable D15..D31 pull-ups - mww 0xffffef1c 0x00010102 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM - # VDDIOMSEL set for +3V3 memory - # Disable D0..D15 pull-ups + mww 0xffffef1c 0x00010102 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM + # VDDIOMSEL set for +3V3 memory + # Disable D0..D15 pull-ups - mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks) + mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks) - mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command + mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command mww 0x20000000 0 - mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' Command mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 @@ -78,11 +78,11 @@ $_TARGETNAME configure -event reset-init { mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 - mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command mww 0x20000000 0 - mww 0xffffea00 0x0 # SDRAMC_MR : normal mode + mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode mww 0x20000000 0 - mww 0xffffea04 0x2a2 # SDRAMC_TR : Set refresh timer count to 7us + mww 0xffffea04 0x2a2 ;# SDRAMC_TR : Set refresh timer count to 7us } diff --git a/tcl/chip/st/spear/spear310.tcl b/tcl/chip/st/spear/spear310.tcl index b2c3676e..95df51d4 100644 --- a/tcl/chip/st/spear/spear310.tcl +++ b/tcl/chip/st/spear/spear310.tcl @@ -6,11 +6,11 @@ proc sp310_init {} { - mww 0xfca80034 0x0000ffff # enable all RAS clocks - mww 0xfca80040 0x00000000 # remove all RAS resets - mww 0xb4000008 0x00002ff4 # RAS function enable + mww 0xfca80034 0x0000ffff ;# enable all RAS clocks + mww 0xfca80040 0x00000000 ;# remove all RAS resets + mww 0xb4000008 0x00002ff4 ;# RAS function enable - mww 0xfca8013c 0x2f7bc210 # plgpio_pad_drv + mww 0xfca8013c 0x2f7bc210 ;# plgpio_pad_drv mww 0xfca80140 0x017bdef6 } @@ -21,20 +21,20 @@ proc sp310_emi_init {} { mmw 0xfca8013c 0x00039ce7 0x00000000 # set safe EMI timing as in BootROM - #mww 0x4f000000 0x0000000f # tAP_0_reg - #mww 0x4f000004 0x00000000 # tSDP_0_reg - #mww 0x4f000008 0x000000ff # tDPw_0_reg - #mww 0x4f00000c 0x00000111 # tDPr_0_reg - #mww 0x4f000010 0x00000002 # tDCS_0_reg + #mww 0x4f000000 0x0000000f ;# tAP_0_reg + #mww 0x4f000004 0x00000000 ;# tSDP_0_reg + #mww 0x4f000008 0x000000ff ;# tDPw_0_reg + #mww 0x4f00000c 0x00000111 ;# tDPr_0_reg + #mww 0x4f000010 0x00000002 ;# tDCS_0_reg # set fast EMI timing as in Linux - mww 0x4f000000 0x00000010 # tAP_0_reg - mww 0x4f000004 0x00000005 # tSDP_0_reg - mww 0x4f000008 0x0000000a # tDPw_0_reg - mww 0x4f00000c 0x0000000a # tDPr_0_reg - mww 0x4f000010 0x00000005 # tDCS_0_re + mww 0x4f000000 0x00000010 ;# tAP_0_reg + mww 0x4f000004 0x00000005 ;# tSDP_0_reg + mww 0x4f000008 0x0000000a ;# tDPw_0_reg + mww 0x4f00000c 0x0000000a ;# tDPr_0_reg + mww 0x4f000010 0x00000005 ;# tDCS_0_re # 32bit wide, 8/16/32bit access - mww 0x4f000014 0x0000000e # control_0_reg - mww 0x4f000094 0x0000003f # ack_reg + mww 0x4f000014 0x0000000e ;# control_0_reg + mww 0x4f000094 0x0000003f ;# ack_reg } diff --git a/tcl/chip/st/spear/spear3xx.tcl b/tcl/chip/st/spear/spear3xx.tcl index ea85d295..660dab3b 100644 --- a/tcl/chip/st/spear/spear3xx.tcl +++ b/tcl/chip/st/spear/spear3xx.tcl @@ -15,34 +15,34 @@ # - HCLK = 166 MHz # - PCLK = 83 MHz proc sp3xx_clock_default {} { - mww 0xfca00000 0x00000002 # set sysclk slow - mww 0xfca00014 0x0ffffff8 # set pll timeout to minimum (100us ?!?) + mww 0xfca00000 0x00000002 ;# set sysclk slow + mww 0xfca00014 0x0ffffff8 ;# set pll timeout to minimum (100us ?!?) # DDRCORE disable to change frequency set val [expr ([mrw 0xfca8002c] & ~0x20000000) | 0x40000000] mww 0xfca8002c $val - mww 0xfca8002c $val # Yes, write twice! + mww 0xfca8002c $val ;# Yes, write twice! # programming PLL1 - mww 0xfca8000c 0xa600010c # M=166 P=1 N=12 - mww 0xfca80008 0x00001c0a # power down - mww 0xfca80008 0x00001c0e # enable - mww 0xfca80008 0x00001c06 # strobe + mww 0xfca8000c 0xa600010c ;# M=166 P=1 N=12 + mww 0xfca80008 0x00001c0a ;# power down + mww 0xfca80008 0x00001c0e ;# enable + mww 0xfca80008 0x00001c06 ;# strobe mww 0xfca80008 0x00001c0e while { [expr [mrw 0xfca80008] & 0x01] == 0x00 } { sleep 1 } # programming PLL2 - mww 0xfca80018 0xa600010c # M=166, P=1, N=12 - mww 0xfca80014 0x00001c0a # power down - mww 0xfca80014 0x00001c0e # enable - mww 0xfca80014 0x00001c06 # strobe + mww 0xfca80018 0xa600010c ;# M=166, P=1, N=12 + mww 0xfca80014 0x00001c0a ;# power down + mww 0xfca80014 0x00001c0e ;# enable + mww 0xfca80014 0x00001c06 ;# strobe mww 0xfca80014 0x00001c0e while { [expr [mrw 0xfca80014] & 0x01] == 0x00 } { sleep 1 } - mww 0xfca80028 0x00000082 # enable plltimeen - mww 0xfca80024 0x00000511 # set hclkdiv="/2" & pclkdiv="/2" + mww 0xfca80028 0x00000082 ;# enable plltimeen + mww 0xfca80024 0x00000511 ;# set hclkdiv="/2" & pclkdiv="/2" - mww 0xfca00000 0x00000004 # setting SYSCTL to NORMAL mode + mww 0xfca00000 0x00000004 ;# setting SYSCTL to NORMAL mode while { [expr [mrw 0xfca00000] & 0x20] != 0x20 } { sleep 1 } # Select source of DDR clock @@ -54,15 +54,15 @@ proc sp3xx_clock_default {} { } proc sp3xx_common_init {} { - mww 0xfca8002c 0xfffffff8 # enable clock of all peripherals - mww 0xfca80038 0x00000000 # remove reset of all peripherals + mww 0xfca8002c 0xfffffff8 ;# enable clock of all peripherals + mww 0xfca80038 0x00000000 ;# remove reset of all peripherals - mww 0xfca800e4 0x78000008 # COMP1V8_REG - mww 0xfca800ec 0x78000008 # COMP3V3_REG + mww 0xfca800e4 0x78000008 ;# COMP1V8_REG + mww 0xfca800ec 0x78000008 ;# COMP3V3_REG - mww 0xfca80050 0x00000001 # Enable clk mem port 1 + mww 0xfca80050 0x00000001 ;# Enable clk mem port 1 - mww 0xfc000000 0x10000f5f # init SMI and set HW mode + mww 0xfc000000 0x10000f5f ;# init SMI and set HW mode mww 0xfc000000 0x00000f5f # Initialize Bus Interconnection Matrix diff --git a/tcl/chip/st/spear/spear3xx_ddr.tcl b/tcl/chip/st/spear/spear3xx_ddr.tcl index a804cdc4..14b5dfe0 100644 --- a/tcl/chip/st/spear/spear3xx_ddr.tcl +++ b/tcl/chip/st/spear/spear3xx_ddr.tcl @@ -41,80 +41,80 @@ proc ddr_spr3xx_mt47h64m16_3_333_cl5_async {} { # Use "1:2 sync" only when DDR clock source is PLL1 and # HCLK is half of PLL1 - mww 0xfc600000 0x00000001 # MEMCTL_AHB_SET_00 # This is async - mww 0xfc600004 0x00000000 # MEMCTL_AHB_SET_01 -# mww 0xfc600000 0x02020201 # MEMCTL_AHB_SET_00 # This is 1:2 sync -# mww 0xfc600004 0x02020202 # MEMCTL_AHB_SET_01 + mww 0xfc600000 0x00000001 ;# MEMCTL_AHB_SET_00 # This is async + mww 0xfc600004 0x00000000 ;# MEMCTL_AHB_SET_01 +# mww 0xfc600000 0x02020201 ;# MEMCTL_AHB_SET_00 # This is 1:2 sync +# mww 0xfc600004 0x02020202 ;# MEMCTL_AHB_SET_01 - mww 0xfc600008 0x01000000 # MEMCTL_RFSH_SET_00 - mww 0xfc60000c 0x00000101 # MEMCTL_DLL_SET_00 - mww 0xfc600010 0x00000101 # MEMCTL_GP_00 - mww 0xfc600014 0x01000000 # MEMCTL_GP_01 - mww 0xfc600018 0x00010001 # MEMCTL_GP_02 - mww 0xfc60001c 0x00000100 # MEMCTL_GP_03 - mww 0xfc600020 0x00010001 # MEMCTL_GP_04 - mww 0xfc600024 0x01020203 # MEMCTL_GP_05 - mww 0xfc600028 0x01000102 # MEMCTL_GP_06 - mww 0xfc60002c 0x02000202 # MEMCTL_AHB_SET_02 - mww 0xfc600030 0x04040105 # MEMCTL_AHB_SET_03 - mww 0xfc600034 0x03030302 # MEMCTL_AHB_SET_04 - mww 0xfc600038 0x02040101 # MEMCTL_AHB_SET_05 - mww 0xfc60003c 0x00000002 # MEMCTL_AHB_SET_06 - mww 0xfc600044 0x03000405 # MEMCTL_DQS_SET_0 - mww 0xfc600048 0x03040002 # MEMCTL_TIME_SET_01 - mww 0xfc60004c 0x04000305 # MEMCTL_TIME_SET_02 - mww 0xfc600050 0x0505053f # MEMCTL_AHB_RELPR_00 - mww 0xfc600054 0x05050505 # MEMCTL_AHB_RELPR_01 - mww 0xfc600058 0x04040405 # MEMCTL_AHB_RELPR_02 - mww 0xfc60005c 0x04040404 # MEMCTL_AHB_RELPR_03 - mww 0xfc600060 0x03030304 # MEMCTL_AHB_RELPR_04 - mww 0xfc600064 0x03030303 # MEMCTL_AHB_RELPR_05 - mww 0xfc600068 0x02020203 # MEMCTL_AHB_RELPR_06 - mww 0xfc60006c 0x02020202 # MEMCTL_AHB_RELPR_07 - mww 0xfc600070 0x01010102 # MEMCTL_AHB_RELPR_08 - mww 0xfc600074 0x01010101 # MEMCTL_AHB_RELPR_09 - mww 0xfc600078 0x00000001 # MEMCTL_AHB_RELPR_10 - mww 0xfc600088 0x0a0c0a00 # MEMCTL_DQS_SET_1 - mww 0xfc60008c 0x0000023f # MEMCTL_GP_07 - mww 0xfc600090 0x00050a00 # MEMCTL_GP_08 - mww 0xfc600094 0x11000000 # MEMCTL_GP_09 - mww 0xfc600098 0x00001302 # MEMCTL_GP_10 - mww 0xfc60009c 0x00001c1c # MEMCTL_DLL_SET_01 - mww 0xfc6000a0 0x7c000000 # MEMCTL_DQS_OUT_SHIFT - mww 0xfc6000a4 0x005c0000 # MEMCTL_WR_DQS_SHIFT - mww 0xfc6000a8 0x2b050e00 # MEMCTL_TIME_SET_03 - mww 0xfc6000ac 0x00640064 # MEMCTL_AHB_PRRLX_00 - mww 0xfc6000b0 0x00640064 # MEMCTL_AHB_PRRLX_01 - mww 0xfc6000b4 0x00000064 # MEMCTL_AHB_PRRLX_02 - mww 0xfc6000b8 0x00000000 # MEMCTL_OUTRANGE_LGTH - mww 0xfc6000bc 0x00200020 # MEMCTL_AHB_RW_SET_00 - mww 0xfc6000c0 0x00200020 # MEMCTL_AHB_RW_SET_01 - mww 0xfc6000c4 0x00200020 # MEMCTL_AHB_RW_SET_02 - mww 0xfc6000c8 0x00200020 # MEMCTL_AHB_RW_SET_03 - mww 0xfc6000cc 0x00200020 # MEMCTL_AHB_RW_SET_04 - mww 0xfc6000d8 0x00000a24 # MEMCTL_TREF - mww 0xfc6000dc 0x00000000 # MEMCTL_EMRS3_DATA - mww 0xfc6000e0 0x5b1c00c8 # MEMCTL_TIME_SET_04 - mww 0xfc6000e4 0x00c8002e # MEMCTL_TIME_SET_05 - mww 0xfc6000e8 0x00000000 # MEMCTL_VERSION - mww 0xfc6000ec 0x0001046b # MEMCTL_TINIT - mww 0xfc6000f0 0x00000000 # MEMCTL_OUTRANGE_ADDR_01 - mww 0xfc6000f4 0x00000000 # MEMCTL_OUTRANGE_ADDR_02 - mww 0xfc600104 0x001c0000 # MEMCTL_DLL_DQS_DELAY_BYPASS_0 - mww 0xfc600108 0x0019001c # MEMCTL_DLL_SET_02 - mww 0xfc60010c 0x00100000 # MEMCTL_DLL_SET_03 - mww 0xfc600110 0x001e007a # MEMCTL_DQS_SET_2 - mww 0xfc600188 0x00000000 # MEMCTL_USER_DEF_REG_0 - mww 0xfc60018c 0x00000000 # MEMCTL_USER_DEF_REG_1 - mww 0xfc600190 0x01010001 # MEMCTL_GP_11 - mww 0xfc600194 0x01000000 # MEMCTL_GP_12 - mww 0xfc600198 0x00000001 # MEMCTL_GP_13 - mww 0xfc60019c 0x00400000 # MEMCTL_GP_14 - mww 0xfc6001a0 0x00000000 # MEMCTL_EMRS2_DATA_X - mww 0xfc6001a4 0x00000000 # MEMCTL_LWPWR_CNT - mww 0xfc6001a8 0x00000000 # MEMCTL_LWPWR_REG - mww 0xfc6001ac 0x00860000 # MEMCTL_GP_15 - mww 0xfc6001b0 0x00000002 # MEMCTL_TPDEX + mww 0xfc600008 0x01000000 ;# MEMCTL_RFSH_SET_00 + mww 0xfc60000c 0x00000101 ;# MEMCTL_DLL_SET_00 + mww 0xfc600010 0x00000101 ;# MEMCTL_GP_00 + mww 0xfc600014 0x01000000 ;# MEMCTL_GP_01 + mww 0xfc600018 0x00010001 ;# MEMCTL_GP_02 + mww 0xfc60001c 0x00000100 ;# MEMCTL_GP_03 + mww 0xfc600020 0x00010001 ;# MEMCTL_GP_04 + mww 0xfc600024 0x01020203 ;# MEMCTL_GP_05 + mww 0xfc600028 0x01000102 ;# MEMCTL_GP_06 + mww 0xfc60002c 0x02000202 ;# MEMCTL_AHB_SET_02 + mww 0xfc600030 0x04040105 ;# MEMCTL_AHB_SET_03 + mww 0xfc600034 0x03030302 ;# MEMCTL_AHB_SET_04 + mww 0xfc600038 0x02040101 ;# MEMCTL_AHB_SET_05 + mww 0xfc60003c 0x00000002 ;# MEMCTL_AHB_SET_06 + mww 0xfc600044 0x03000405 ;# MEMCTL_DQS_SET_0 + mww 0xfc600048 0x03040002 ;# MEMCTL_TIME_SET_01 + mww 0xfc60004c 0x04000305 ;# MEMCTL_TIME_SET_02 + mww 0xfc600050 0x0505053f ;# MEMCTL_AHB_RELPR_00 + mww 0xfc600054 0x05050505 ;# MEMCTL_AHB_RELPR_01 + mww 0xfc600058 0x04040405 ;# MEMCTL_AHB_RELPR_02 + mww 0xfc60005c 0x04040404 ;# MEMCTL_AHB_RELPR_03 + mww 0xfc600060 0x03030304 ;# MEMCTL_AHB_RELPR_04 + mww 0xfc600064 0x03030303 ;# MEMCTL_AHB_RELPR_05 + mww 0xfc600068 0x02020203 ;# MEMCTL_AHB_RELPR_06 + mww 0xfc60006c 0x02020202 ;# MEMCTL_AHB_RELPR_07 + mww 0xfc600070 0x01010102 ;# MEMCTL_AHB_RELPR_08 + mww 0xfc600074 0x01010101 ;# MEMCTL_AHB_RELPR_09 + mww 0xfc600078 0x00000001 ;# MEMCTL_AHB_RELPR_10 + mww 0xfc600088 0x0a0c0a00 ;# MEMCTL_DQS_SET_1 + mww 0xfc60008c 0x0000023f ;# MEMCTL_GP_07 + mww 0xfc600090 0x00050a00 ;# MEMCTL_GP_08 + mww 0xfc600094 0x11000000 ;# MEMCTL_GP_09 + mww 0xfc600098 0x00001302 ;# MEMCTL_GP_10 + mww 0xfc60009c 0x00001c1c ;# MEMCTL_DLL_SET_01 + mww 0xfc6000a0 0x7c000000 ;# MEMCTL_DQS_OUT_SHIFT + mww 0xfc6000a4 0x005c0000 ;# MEMCTL_WR_DQS_SHIFT + mww 0xfc6000a8 0x2b050e00 ;# MEMCTL_TIME_SET_03 + mww 0xfc6000ac 0x00640064 ;# MEMCTL_AHB_PRRLX_00 + mww 0xfc6000b0 0x00640064 ;# MEMCTL_AHB_PRRLX_01 + mww 0xfc6000b4 0x00000064 ;# MEMCTL_AHB_PRRLX_02 + mww 0xfc6000b8 0x00000000 ;# MEMCTL_OUTRANGE_LGTH + mww 0xfc6000bc 0x00200020 ;# MEMCTL_AHB_RW_SET_00 + mww 0xfc6000c0 0x00200020 ;# MEMCTL_AHB_RW_SET_01 + mww 0xfc6000c4 0x00200020 ;# MEMCTL_AHB_RW_SET_02 + mww 0xfc6000c8 0x00200020 ;# MEMCTL_AHB_RW_SET_03 + mww 0xfc6000cc 0x00200020 ;# MEMCTL_AHB_RW_SET_04 + mww 0xfc6000d8 0x00000a24 ;# MEMCTL_TREF + mww 0xfc6000dc 0x00000000 ;# MEMCTL_EMRS3_DATA + mww 0xfc6000e0 0x5b1c00c8 ;# MEMCTL_TIME_SET_04 + mww 0xfc6000e4 0x00c8002e ;# MEMCTL_TIME_SET_05 + mww 0xfc6000e8 0x00000000 ;# MEMCTL_VERSION + mww 0xfc6000ec 0x0001046b ;# MEMCTL_TINIT + mww 0xfc6000f0 0x00000000 ;# MEMCTL_OUTRANGE_ADDR_01 + mww 0xfc6000f4 0x00000000 ;# MEMCTL_OUTRANGE_ADDR_02 + mww 0xfc600104 0x001c0000 ;# MEMCTL_DLL_DQS_DELAY_BYPASS_0 + mww 0xfc600108 0x0019001c ;# MEMCTL_DLL_SET_02 + mww 0xfc60010c 0x00100000 ;# MEMCTL_DLL_SET_03 + mww 0xfc600110 0x001e007a ;# MEMCTL_DQS_SET_2 + mww 0xfc600188 0x00000000 ;# MEMCTL_USER_DEF_REG_0 + mww 0xfc60018c 0x00000000 ;# MEMCTL_USER_DEF_REG_1 + mww 0xfc600190 0x01010001 ;# MEMCTL_GP_11 + mww 0xfc600194 0x01000000 ;# MEMCTL_GP_12 + mww 0xfc600198 0x00000001 ;# MEMCTL_GP_13 + mww 0xfc60019c 0x00400000 ;# MEMCTL_GP_14 + mww 0xfc6001a0 0x00000000 ;# MEMCTL_EMRS2_DATA_X + mww 0xfc6001a4 0x00000000 ;# MEMCTL_LWPWR_CNT + mww 0xfc6001a8 0x00000000 ;# MEMCTL_LWPWR_REG + mww 0xfc6001ac 0x00860000 ;# MEMCTL_GP_15 + mww 0xfc6001b0 0x00000002 ;# MEMCTL_TPDEX # MPMC START mww 0xfc60001c 0x01000100 } diff --git a/tcl/interface/buspirate.cfg b/tcl/interface/buspirate.cfg index 9c7e0e70..2b68538b 100644 --- a/tcl/interface/buspirate.cfg +++ b/tcl/interface/buspirate.cfg @@ -10,7 +10,7 @@ interface buspirate #buspirate_port /dev/ttyUSB0 # communication speed setting -buspirate_speed normal # or fast +buspirate_speed normal ;# or fast # voltage regulator Enabled = 1 Disabled = 0 #buspirate_vreg 0 diff --git a/tcl/target/ar71xx.cfg b/tcl/target/ar71xx.cfg index 126efe4d..3ac61d94 100644 --- a/tcl/target/ar71xx.cfg +++ b/tcl/target/ar71xx.cfg @@ -15,35 +15,35 @@ target create $TARGETNAME mips_m4k -endian big -chain-position $TARGETNAME $TARGETNAME configure -event reset-halt-post { #setup PLL to lowest common denominator 300/300/150 setting - mww 0xb8050000 0x000f40a3 # reset val + CPU:3 DDR:3 AHB:0 - mww 0xb8050000 0x800f40a3 # send to PLL + mww 0xb8050000 0x000f40a3 ;# reset val + CPU:3 DDR:3 AHB:0 + mww 0xb8050000 0x800f40a3 ;# send to PLL #next command will reset for PLL changes to take effect - mww 0xb8050008 3 # set reset_switch and clock_switch (resets SoC) + mww 0xb8050008 3 ;# set reset_switch and clock_switch (resets SoC) } $TARGETNAME configure -event reset-init { #complete pll initialization - mww 0xb8050000 0x800f0080 # set sw_update bit - mww 0xb8050008 0 # clear reset_switch bit - mww 0xb8050000 0x800f00e8 # clr pwrdwn & bypass - mww 0xb8050008 1 # set clock_switch bit - sleep 1 # wait for lock + mww 0xb8050000 0x800f0080 ;# set sw_update bit + mww 0xb8050008 0 ;# clear reset_switch bit + mww 0xb8050000 0x800f00e8 ;# clr pwrdwn & bypass + mww 0xb8050008 1 ;# set clock_switch bit + sleep 1 ;# wait for lock # Setup DDR config and flash mapping - mww 0xb8000000 0xefbc8cd0 # DDR cfg cdl val (rst: 0x5bfc8d0) - mww 0xb8000004 0x8e7156a2 # DDR cfg2 cdl val (rst: 0x80d106a8) - - mww 0xb8000010 8 # force precharge all banks - mww 0xb8000010 1 # force EMRS update cycle - mww 0xb800000c 0 # clr ext. mode register - mww 0xb8000010 2 # force auto refresh all banks - mww 0xb8000010 8 # force precharge all banks - mww 0xb8000008 0x31 # set DDR mode value CAS=3 - mww 0xb8000010 1 # force EMRS update cycle - mww 0xb8000014 0x461b # DDR refresh value - mww 0xb8000018 0xffff # DDR Read Data This Cycle value (16bit: 0xffff) - mww 0xb800001c 0x7 # delay added to the DQS line (normal = 7) + mww 0xb8000000 0xefbc8cd0 ;# DDR cfg cdl val (rst: 0x5bfc8d0) + mww 0xb8000004 0x8e7156a2 ;# DDR cfg2 cdl val (rst: 0x80d106a8) + + mww 0xb8000010 8 ;# force precharge all banks + mww 0xb8000010 1 ;# force EMRS update cycle + mww 0xb800000c 0 ;# clr ext. mode register + mww 0xb8000010 2 ;# force auto refresh all banks + mww 0xb8000010 8 ;# force precharge all banks + mww 0xb8000008 0x31 ;# set DDR mode value CAS=3 + mww 0xb8000010 1 ;# force EMRS update cycle + mww 0xb8000014 0x461b ;# DDR refresh value + mww 0xb8000018 0xffff ;# DDR Read Data This Cycle value (16bit: 0xffff) + mww 0xb800001c 0x7 ;# delay added to the DQS line (normal = 7) mww 0xb8000020 0 mww 0xb8000024 0 mww 0xb8000028 0 diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg index 535ae0fb..8acdebd7 100644 --- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg +++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg @@ -63,41 +63,41 @@ arm7_9 dcc_downloads enable arm7_9 fast_memory_access enable proc at91sam_init { } { - mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset - mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog - - mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator - sleep 20 # wait 20 ms - mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator - sleep 10 # wait 10 ms - mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz - sleep 20 # wait 20 ms - mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler - sleep 10 # wait 10 ms - mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected - sleep 10 # wait 10 ms + mww 0xfffffd08 0xa5000501 ;# RSTC_MR : enable user reset + mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog + + mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator + sleep 20 ;# wait 20 ms + mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator + sleep 10 ;# wait 10 ms + mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR: Set PLLA Register for 198,656MHz + sleep 20 ;# wait 20 ms + mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler + sleep 10 ;# wait 10 ms + mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected + sleep 10 ;# wait 10 ms # Now run at anything fast... ie: 10mhz! - jtag_rclk 10000 # Increase JTAG Speed to 6 MHz + jtag_rclk 10000 ;# Increase JTAG Speed to 6 MHz - mww 0xffffec00 0x0a0a0a0a # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit - mww 0xffffec04 0x0b0b0b0b # SMC_PULSE0 - mww 0xffffec08 0x00160016 # SMC_CYCLE0 - mww 0xffffec0c 0x00161003 # SMC_MODE0 + mww 0xffffec00 0x0a0a0a0a ;# SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit + mww 0xffffec04 0x0b0b0b0b ;# SMC_PULSE0 + mww 0xffffec08 0x00160016 ;# SMC_CYCLE0 + mww 0xffffec0c 0x00161003 ;# SMC_MODE0 - mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31 - mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 + mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral function for D15..D31 + mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31 - mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM + mww 0xffffef1c 0x2 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM - mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks) - #mww 0xffffea08 0x85227254 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks) + mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks) + #mww 0xffffea08 0x85227254 ;# SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks) - mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command + mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command mww 0x20000000 0 - mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command mww 0x20000000 0 - mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command + mww 0xffffea00 0x4 ;# SDRAMC_MR : issue 8 x 'Auto-Refresh' Command mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 @@ -113,9 +113,9 @@ proc at91sam_init { } { mww 0x20000000 0 mww 0xffffea00 0x4 mww 0x20000000 0 - mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command mww 0x20000000 0 - mww 0xffffea00 0x0 # SDRAMC_MR : normal mode + mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode mww 0x20000000 0 - mww 0xffffea04 0x5d2 # SDRAMC_TR : Set refresh timer count to 15us + mww 0xffffea04 0x5d2 ;# SDRAMC_TR : Set refresh timer count to 15us } diff --git a/tcl/target/lpc3131.cfg b/tcl/target/lpc3131.cfg index 5c6aa3ce..560555b4 100644 --- a/tcl/target/lpc3131.cfg +++ b/tcl/target/lpc3131.cfg @@ -66,7 +66,7 @@ $_TARGETNAME configure -event reset-init { echo "\nRunning reset init script for LPC3131\n" halt wait_halt - reg cpsr 0xa00000d3 #Supervisor mode + reg cpsr 0xa00000d3 ;#Supervisor mode reg pc 0x11029000 poll sleep 500 diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg index 8ff5be93..71e7353d 100644 --- a/tcl/target/xba_revA3.cfg +++ b/tcl/target/xba_revA3.cfg @@ -35,36 +35,36 @@ $_TARGETNAME configure -event reset-init { ############################################################################# # setup expansion bus CS, disable external wdt ############################################################################# - mww 0xc4000000 0xbd113842 #CS0 : Flash, write enabled @0x50000000 - mww 0xc4000004 0x94d10013 #CS1 - mww 0xc4000008 0x95960003 #CS2 - mww 0xc400000c 0x00000000 #CS3 - mww 0xc4000010 0x80900003 #CS4 - mww 0xc4000014 0x9d520003 #CS5 - mww 0xc4000018 0x81860001 #CS6 - mww 0xc400001c 0x80900003 #CS7 + mww 0xc4000000 0xbd113842 ;#CS0 : Flash, write enabled @0x50000000 + mww 0xc4000004 0x94d10013 ;#CS1 + mww 0xc4000008 0x95960003 ;#CS2 + mww 0xc400000c 0x00000000 ;#CS3 + mww 0xc4000010 0x80900003 ;#CS4 + mww 0xc4000014 0x9d520003 ;#CS5 + mww 0xc4000018 0x81860001 ;#CS6 + mww 0xc400001c 0x80900003 ;#CS7 ############################################################################# # init SDRAM controller: 16MB, one bank, CL3 ############################################################################# - mww 0xCC000000 0x2A # SDRAM_CFG: 64MBit, CL3 - mww 0xCC000004 0 # disable refresh - mww 0xCC000008 3 # NOP + mww 0xCC000000 0x2A ;# SDRAM_CFG: 64MBit, CL3 + mww 0xCC000004 0 ;# disable refresh + mww 0xCC000008 3 ;# NOP sleep 100 - mww 0xCC000004 2100 # set refresh counter - mww 0xCC000008 2 # Precharge All Banks + mww 0xCC000004 2100 ;# set refresh counter + mww 0xCC000008 2 ;# Precharge All Banks sleep 100 - mww 0xCC000008 4 # Auto Refresh - mww 0xCC000008 4 # Auto Refresh - mww 0xCC000008 4 # Auto Refresh - mww 0xCC000008 4 # Auto Refresh - mww 0xCC000008 4 # Auto Refresh - mww 0xCC000008 4 # Auto Refresh - mww 0xCC000008 4 # Auto Refresh - mww 0xCC000008 4 # Auto Refresh - mww 0xCC000008 1 # Mode Select CL3 - - #mww 0xc4000020 0xffffee # CFG0: remove expansion bus boot flash + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 1 ;# Mode Select CL3 + + #mww 0xc4000020 0xffffee ;# CFG0: remove expansion bus boot flash #mirror at 0x00000000 #big endian |