diff options
| author | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-06-17 06:41:05 +0000 |
|---|---|---|
| committer | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-06-17 06:41:05 +0000 |
| commit | 7ddc6c3d55d0607c71f38cbc66de54c649822a1e (patch) | |
| tree | fbd8c53eabf2c9c8a4e325968d88d8346c2068fc /tcl | |
| parent | 10e435c96102b323a30323b0aeffd0db7bab1a48 (diff) | |
| download | openocd+libswd-7ddc6c3d55d0607c71f38cbc66de54c649822a1e.tar.gz openocd+libswd-7ddc6c3d55d0607c71f38cbc66de54c649822a1e.tar.bz2 openocd+libswd-7ddc6c3d55d0607c71f38cbc66de54c649822a1e.tar.xz openocd+libswd-7ddc6c3d55d0607c71f38cbc66de54c649822a1e.zip | |
David Brownell <david-b@pacbell.net>:
Fix for a goofy "board" config ... reuse target/pxa270.cfg
instead of using a private copy.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2266 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl')
| -rw-r--r-- | tcl/board/crossbow_tech_imote2.cfg | 44 |
1 files changed, 4 insertions, 40 deletions
diff --git a/tcl/board/crossbow_tech_imote2.cfg b/tcl/board/crossbow_tech_imote2.cfg index 7527bef8..c2714402 100644 --- a/tcl/board/crossbow_tech_imote2.cfg +++ b/tcl/board/crossbow_tech_imote2.cfg @@ -1,46 +1,10 @@ # Crossbow Technology iMote2 -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME imote2 -} +set CHIPNAME imote2 +source [find target/pxa270.cfg] -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # force an error till we get a good number - set _CPUTAPID 0xffffffff -} - -# PXA271 and an Intel Strataflash of 32 Megabytes (p30) -# -# Marvell/Intel PXA270 Script -# set jtag_nsrst_delay to the delay introduced by your reset circuit -# the rest of the needed delays are built into the openocd program +# longer-than-normal reset delay jtag_nsrst_delay 800 -# set the jtag_ntrst_delay to the delay introduced by a reset circuit -# the rest of the needed delays are built into the openocd program -jtag_ntrst_delay 0 -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config trst_and_srst separate -#jtag scan chain - -jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID - -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x -$_TARGETNAME configure -work-area-virt 0x0x5c000000 -work-area-phys 0x0x5c000000 -work-area-size 0x10000 -work-area-backup 1 -# maps to PXA internal RAM. If you are using a PXA255 -# you must initialize SDRAM or leave this option off - -#flash bank <driver> <base> <size> <chip_width> <bus_width> # works for P30 flash -flash bank cfi 0x00000000 0x2000000 2 2 0 +flash bank cfi 0x00000000 0x2000000 2 2 $_TARGETNAME |