- added example for testing the JTAG speed with a FT2232 device

git-svn-id: svn://svn.berlios.de/openocd/trunk@422 b42882b7-edfa-0310-969c-e2dbd0fdcd60

3 files changed, 211 insertions, 0 deletions

diff --git a/testing/examples/STR710JtagSpeed/prj/eclipse_ft2232_ram.gdb b/testing/examples/STR710JtagSpeed/prj/eclipse_ft2232_ram.gdb
new file mode 100644
index 00000000..92f8e18e
--- /dev/null
+++ b/testing/examples/STR710JtagSpeed/prj/eclipse_ft2232_ram.gdb
@@ -0,0 +1,33 @@
+target remote localhost:3333
+
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 sw_bkpts enable
+monitor mww 0xA0000050 0x01c2
+monitor mdw 0xA0000050
+monitor mww 0x6C000004 0x8005
+monitor mdw 0x6C000004
+monitor mww 0xE0005000 0xFFFF
+monitor mww 0xE0005004 0x00FF
+monitor mww 0xE0005008 0xFFFF
+monitor mdw 0xE0005000
+monitor mdw 0xE0005004
+monitor mdw 0xE0005008
+monitor mww 0xE000500C 0x0000
+
+monitor arm7_9 fast_memory_access enable
+monitor arm7_9 dcc_downloads enable
+monitor verify_ircapture disable
+
+load
+break main
+continue
+
+
+
+
+
+
+
diff --git a/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg b/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg
new file mode 100644
index 00000000..a20cabee
--- /dev/null
+++ b/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg
@@ -0,0 +1,38 @@
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 0
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi
+run_and_halt_time 0 30
+
+working_area 0 0x2000C000 0x4000 nobackup
+
+#flash bank str7x <base> <size> 0 0 <target#> <variant>
+flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
diff --git a/testing/examples/STR710JtagSpeed/prj/str7_ram.ld b/testing/examples/STR710JtagSpeed/prj/str7_ram.ld
new file mode 100644
index 00000000..d760f262
--- /dev/null
+++ b/testing/examples/STR710JtagSpeed/prj/str7_ram.ld
@@ -0,0 +1,140 @@
+/****************************************************************************
+*  Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+*  Redistribution and use in source and binary forms, with or without 
+*  modification, are permitted provided that the following conditions 
+*  are met:
+*  
+*  1. Redistributions of source code must retain the above copyright 
+*     notice, this list of conditions and the following disclaimer.
+*  2. Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in the 
+*     documentation and/or other materials provided with the distribution.
+*  3. Neither the name of the author nor the names of its contributors may 
+*     be used to endorse or promote products derived from this software 
+*     without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
+*  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
+*  THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
+*  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
+*  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 
+*  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 
+*  AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
+*  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
+*  THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
+*  SUCH DAMAGE.
+*
+****************************************************************************
+*
+*  History:
+*
+*  30.03.06  mifi   First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+/*
+ * This file, hitex_str7_ram.ld, locate the program in the internal
+ * ram of the STR7. For more information about the memory of the STR7
+ * take a look in the STR71X Microcontroller Reference Manual.
+ * Reference is made to Rev. 6 March 2005
+ *
+ * Take a look at page 16, section 2.1.1 Memory Map
+ */
+ 
+MEMORY
+{
+  ram : org = 0x62000000, len = 512k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+  .text :
+  {
+    *(.vectors);
+    . = ALIGN(4);
+    *(.init);
+    . = ALIGN(4);
+    *(.text);
+    . = ALIGN(4);
+    *(.rodata);
+    . = ALIGN(4);
+    *(.rodata*);
+    . = ALIGN(4);
+    *(.glue_7t);
+    . = ALIGN(4);
+    *(.glue_7);
+    . = ALIGN(4);
+    etext = .;
+  } > ram
+
+  .data :
+  {
+    PROVIDE (__data_start = .);
+    *(.data)
+    . = ALIGN(4);
+    edata = .;
+    _edata = .;
+    PROVIDE (__data_end = .);
+  } > ram
+
+  .bss :
+  {
+    PROVIDE (__bss_start = .);
+    *(.bss)
+    *(COMMON)
+    . = ALIGN(4);
+    PROVIDE (__bss_end = .);
+    
+    . = ALIGN(256);
+    
+    PROVIDE (__stack_start = .);
+    
+    PROVIDE (__stack_fiq_start = .);
+    . += FIQ_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_fiq_end = .);
+
+    PROVIDE (__stack_irq_start = .);
+    . += IRQ_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_irq_end = .);
+
+    PROVIDE (__stack_abt_start = .);
+    . += ABT_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_abt_end = .);
+
+    PROVIDE (__stack_und_start = .);
+    . += UND_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_und_end = .);
+
+    PROVIDE (__stack_svc_start = .);
+    . += SVC_STACK_SIZE;
+    . = ALIGN(4);
+    PROVIDE (__stack_svc_end = .);
+    PROVIDE (__stack_end = .);
+    PROVIDE (__heap_start = .);   
+  } > ram
+    
+}
+/*** EOF ***/
+