summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--tcl/board/propox_mmnet1001.cfg83
1 files changed, 83 insertions, 0 deletions
diff --git a/tcl/board/propox_mmnet1001.cfg b/tcl/board/propox_mmnet1001.cfg
new file mode 100644
index 00000000..aa6681e4
--- /dev/null
+++ b/tcl/board/propox_mmnet1001.cfg
@@ -0,0 +1,83 @@
+
+## Chip:
+set CHIPNAME at91sam9260
+set CPUTAPID 0x0792603f
+set ENDIAN little
+source [find target/at91sam9260.cfg]
+
+$_TARGETNAME configure -event reset-init {at91sam_init}
+
+
+proc at91sam_init { } {
+
+ # at reset chip runs at 32 kHz => 1/8 * 32 kHz = 4 kHz
+ jtag_rclk 4
+
+ # Enable user reset and disable watchdog
+ mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset
+ mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog
+
+ # Oscillator setup
+ mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator (18.432 MHz)
+ sleep 20 # wait 20 ms
+ mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator
+ sleep 10 # wait 10 ms
+
+ # now we are running at 18.432 MHz kHz => 1/8 * 18.432 MHz = 2.304 MHz
+ jtag_rclk 2000
+
+ mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz
+ sleep 20 # wait 20 ms
+ mww 0xfffffc2c 0x207c3f0c # CKGR_PLLBR: Set PLLB Register for USB usage (USB_CLK = 48 MHz)
+ sleep 10 # wait 10 ms
+ mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler
+ sleep 10 # wait 10 ms
+ mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected
+ sleep 10 # wait 10 ms
+
+ # now we are running at 198.656 MHz kHz => full speed jtag
+ jtag_rclk 30000
+
+ arm7_9 dcc_downloads enable # Enable faster DCC downloads
+
+ # Configure PIO Controller for SDRAM data-lines D16-D31
+ # PC16-PC31 = Peripheral A: D16-D32
+ mww 0xfffff844 0xffff0000 # Interrupt Disable
+ mww 0xfffff854 0xffff0000 # Multi-Drive Disable
+ mww 0xfffff860 0xffff0000 # Pull-Up Disable
+ mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral A function for D15..D31
+ mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 (Peripheral function enable)
+ mww 0xfffffc10 0x00000010 # Enable PIO-C Clock in PMC (PID=4)
+
+ # SD-Ram setup
+ mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM
+ mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (IS42S32160A: 4M Words x 32 Bits x 4 Banks (512-Mbit))
+ mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command
+ mww 0x20000000 0
+ mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command
+ mww 0x20000000 0
+ mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (1st)
+ mww 0x20000000 0
+ mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (2nd)
+ mww 0x20000000 0
+ mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (3th)
+ mww 0x20000000 0
+ mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (4th)
+ mww 0x20000000 0
+ mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (5th)
+ mww 0x20000000 0
+ mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (6th)
+ mww 0x20000000 0
+ mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (7th)
+ mww 0x20000000 0
+ mww 0xffffea00 0x4 # SDRAMC_MR : issue an 'Auto-Refresh' command (8th)
+ mww 0x20000000 0
+ mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command
+ mww 0x20000000 0
+ mww 0xffffea00 0x0 # SDRAMC_MR : Normal Mode
+ mww 0x20000000 0
+ mww 0xFFFFEA04 0x30d # SDRAM Refresh Time Register
+ # datasheet: 8k refresh cycles / 64 ms
+ # MCLK / (8*1024 / 64e-3) = 100e6 / 128000 = 781 = 0x30d
+
+}