diff options
| -rw-r--r-- | NEWS | 2 | ||||
| -rw-r--r-- | src/jtag/ft2232.c | 131 | ||||
| -rw-r--r-- | tcl/interface/kt-link.cfg | 10 |
3 files changed, 143 insertions, 0 deletions
@@ -4,6 +4,8 @@ history for details about what changed, including bugfixes and other issues not mentioned here. JTAG Layer: + Support KT-Link JTAG adapter. + Boundary Scan: Target Layer: Flash Layer: diff --git a/src/jtag/ft2232.c b/src/jtag/ft2232.c index e570cbe9..7e8c84f6 100644 --- a/src/jtag/ft2232.c +++ b/src/jtag/ft2232.c @@ -149,6 +149,7 @@ static int sheevaplug_init(void); static int icebear_jtag_init(void); static int cortino_jtag_init(void); static int signalyzer_h_init(void); +static int ktlink_init(void); /* reset procedures for supported layouts */ static void usbjtag_reset(int trst, int srst); @@ -162,12 +163,14 @@ static void axm0432_jtag_reset(int trst, int srst); static void sheevaplug_reset(int trst, int srst); static void icebear_jtag_reset(int trst, int srst); static void signalyzer_h_reset(int trst, int srst); +static void ktlink_reset(int trst, int srst); /* blink procedures for layouts that support a blinking led */ static void olimex_jtag_blink(void); static void flyswatter_jtag_blink(void); static void turtle_jtag_blink(void); static void signalyzer_h_blink(void); +static void ktlink_blink(void); static const ft2232_layout_t ft2232_layouts[] = { @@ -188,6 +191,7 @@ static const ft2232_layout_t ft2232_layouts[] = { "icebear", icebear_jtag_init, icebear_jtag_reset, NULL }, { "cortino", cortino_jtag_init, comstick_reset, NULL }, { "signalyzer-h", signalyzer_h_init, signalyzer_h_reset, signalyzer_h_blink }, + { "ktlink", ktlink_init, ktlink_reset, ktlink_blink }, { NULL, NULL, NULL, NULL }, }; @@ -3897,3 +3901,130 @@ static void signalyzer_h_blink(void) { signalyzer_h_led_set(signalyzer_h_side, SIGNALYZER_LED_RED, 100, 0, 1); } + +/******************************************************************** + * Support for KT-LINK + * JTAG adapter from KRISTECH + * http://www.kristech.eu + *******************************************************************/ +static int ktlink_init(void) +{ + uint8_t buf[3]; + uint32_t bytes_written; + uint8_t swd_en = 0x20; //0x20 SWD disable, 0x00 SWD enable (ADBUS5) + + low_output = 0x08 | swd_en; // value; TMS=1,TCK=0,TDI=0,SWD=swd_en + low_direction = 0x3B; // out=1; TCK/TDI/TMS=out,TDO=in,SWD=out,RTCK=in,SRSTIN=in + + // initialize low port + buf[0] = 0x80; // command "set data bits low byte" + buf[1] = low_output; + buf[2] = low_direction; + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + { + LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + nTRST = 0x01; + nSRST = 0x02; + nTRSTnOE = 0x04; + nSRSTnOE = 0x08; + + high_output = 0x80; // turn LED on + high_direction = 0xFF; // all outputs + + enum reset_types jtag_reset_config = jtag_get_reset_config(); + + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + { + high_output |= nTRSTnOE; + high_output &= ~nTRST; + } + else + { + high_output &= ~nTRSTnOE; + high_output |= nTRST; + } + + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + { + high_output &= ~nSRSTnOE; + high_output |= nSRST; + } + else + { + high_output |= nSRSTnOE; + high_output &= ~nSRST; + } + + // initialize high port + buf[0] = 0x82; // command "set data bits high byte" + buf[1] = high_output; // value + buf[2] = high_direction; + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + { + LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + +static void ktlink_reset(int trst, int srst) +{ + enum reset_types jtag_reset_config = jtag_get_reset_config(); + + if (trst == 1) + { + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + high_output &= ~nTRSTnOE; + else + high_output &= ~nTRST; + } + else if (trst == 0) + { + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + high_output |= nTRSTnOE; + else + high_output |= nTRST; + } + + if (srst == 1) + { + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + high_output &= ~nSRST; + else + high_output &= ~nSRSTnOE; + } + else if (srst == 0) + { + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + high_output |= nSRST; + else + high_output |= nSRSTnOE; + } + + buffer_write(0x82); // command "set data bits high byte" + buffer_write(high_output); + buffer_write(high_direction); + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output,high_direction); +} + +static void ktlink_blink(void) +{ + /*LED connected to ACBUS7 */ + if (high_output & 0x80) + high_output &= 0x7F; + else + high_output |= 0x80; + + buffer_write(0x82); // command "set data bits high byte" + buffer_write(high_output); + buffer_write(high_direction); +} + diff --git a/tcl/interface/kt-link.cfg b/tcl/interface/kt-link.cfg new file mode 100644 index 00000000..93af8e44 --- /dev/null +++ b/tcl/interface/kt-link.cfg @@ -0,0 +1,10 @@ +# +# Kristech KT-Link +# +# http://www.kristech.eu +# + +interface ft2232 +ft2232_device_desc "KT-LINK" +ft2232_layout ktlink +ft2232_vid_pid 0x0403 0xBBE2 |