diff options
| -rw-r--r-- | doc/openocd.texi | 32 | ||||
| -rw-r--r-- | src/target/arm7_9_common.c | 16 |
2 files changed, 29 insertions, 19 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 6057aad2..b91e7540 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2501,7 +2501,7 @@ signal implementations. The default behaviour if no option given is @option{separate}, indicating everything behaves normally. @option{srst_pulls_trst} states that the -test logic is reset together with the reset of the system (e.g. Philips +test logic is reset together with the reset of the system (e.g. NXP LPC2000, "broken" board layout), @option{trst_pulls_srst} says that the system is reset together with the test logic (only hypothetical, I haven't seen hardware with such a bug, and can be worked around). @@ -5867,26 +5867,36 @@ ARM9TDMI, ARM920T or ARM926EJ-S. They are available in addition to the ARM commands, and any other core-specific commands that may be available. -@deffn Command {arm7_9 dbgrq} (@option{enable}|@option{disable}) -Control use of the EmbeddedIce DBGRQ signal to force entry into debug mode, -instead of breakpoints. This should be -safe for all but ARM7TDMI--S cores (like Philips LPC). +@deffn Command {arm7_9 dbgrq} [@option{enable}|@option{disable}] +Displays the value of the flag controlling use of the +the EmbeddedIce DBGRQ signal to force entry into debug mode, +instead of breakpoints. +If a boolean parameter is provided, first assigns that flag. + +This should be +safe for all but ARM7TDMI-S cores (like NXP LPC). This feature is enabled by default on most ARM9 cores, including ARM9TDMI, ARM920T, and ARM926EJ-S. @end deffn -@deffn Command {arm7_9 dcc_downloads} (@option{enable}|@option{disable}) +@deffn Command {arm7_9 dcc_downloads} [@option{enable}|@option{disable}] @cindex DCC -Control the use of the debug communications channel (DCC) to write larger (>128 byte) -amounts of memory. DCC downloads offer a huge speed increase, but might be +Displays the value of the flag controlling use of the debug communications +channel (DCC) to write larger (>128 byte) amounts of memory. +If a boolean parameter is provided, first assigns that flag. + +DCC downloads offer a huge speed increase, but might be unsafe, especially with targets running at very low speeds. This command was introduced with OpenOCD rev. 60, and requires a few bytes of working area. @end deffn @anchor{arm7_9 fast_memory_access} -@deffn Command {arm7_9 fast_memory_access} (@option{enable}|@option{disable}) -Enable or disable memory writes and reads that don't check completion of -the operation. This provides a huge speed increase, especially with USB JTAG +@deffn Command {arm7_9 fast_memory_access} [@option{enable}|@option{disable}] +Displays the value of the flag controlling use of memory writes and reads +that don't check completion of the operation. +If a boolean parameter is provided, first assigns that flag. + +This provides a huge speed increase, especially with USB JTAG cables (FT2232), but might be unsafe if used with targets running at very low speeds, like the 32kHz startup clock of an AT91RM9200. @end deffn diff --git a/src/target/arm7_9_common.c b/src/target/arm7_9_common.c index a09b0ad9..2f4c408c 100644 --- a/src/target/arm7_9_common.c +++ b/src/target/arm7_9_common.c @@ -2864,32 +2864,32 @@ int arm7_9_init_arch_info(struct target *target, struct arm7_9_common *arm7_9) static const struct command_registration arm7_9_any_command_handlers[] = { { "dbgrq", - .handler = &handle_arm7_9_dbgrq_command, + .handler = handle_arm7_9_dbgrq_command, .mode = COMMAND_ANY, - .usage = "<enable|disable>", + .usage = "['enable'|'disable']", .help = "use EmbeddedICE dbgrq instead of breakpoint " "for target halt requests", }, { "fast_memory_access", - .handler = &handle_arm7_9_fast_memory_access_command, + .handler = handle_arm7_9_fast_memory_access_command, .mode = COMMAND_ANY, - .usage = "<enable|disable>", + .usage = "['enable'|'disable']", .help = "use fast memory accesses instead of slower " "but potentially safer accesses", }, { "dcc_downloads", - .handler = &handle_arm7_9_dcc_downloads_command, + .handler = handle_arm7_9_dcc_downloads_command, .mode = COMMAND_ANY, - .usage = "<enable | disable>", + .usage = "['enable'|'disable']", .help = "use DCC downloads for larger memory writes", }, { "semihosting", - .handler = &handle_arm7_9_semihosting_command, + .handler = handle_arm7_9_semihosting_command, .mode = COMMAND_EXEC, - .usage = "<enable | disable>", + .usage = "['enable'|'disable']", .help = "activate support for semihosting operations", }, COMMAND_REGISTRATION_DONE |