summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--tcl/target/omap3530.cfg40
1 files changed, 25 insertions, 15 deletions
diff --git a/tcl/target/omap3530.cfg b/tcl/target/omap3530.cfg
index 84460705..45f3c01c 100644
--- a/tcl/target/omap3530.cfg
+++ b/tcl/target/omap3530.cfg
@@ -34,28 +34,38 @@ if { [info exists JRC_TAPID ] } {
jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
-expected-id $_JRC_TAPID
-jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"
-
# GDB target: Cortex-A8, using DAP
-target create omap3.cpu cortex_a8 -chain-position $_CHIPNAME.dap
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.dap
+
+###################
-# FIXME much of this should be in reset event handlers
-proc omap3_dbginit { } {
- poll off
- sleep 100
+# the reset sequence is event-driven
+# and kind of finicky...
+
+# some TCK tycles are required to activate the DEBUG power domain
+jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"
- jtag tapenable omap3530.dap
- targets
+# have the DAP "always" be active
+jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
+
+proc omap3_dbginit {target} {
# General Cortex A8 debug initialisation
cortex_a8 dbginit
# Enable DBGU signal for OMAP353x
- omap3.cpu mww 0x5401d030 0x00002000
- poll on
+ $target mww 0x5401d030 0x00002000
}
-set PRM_RSTCTRL 0x48307250
-
-omap3.cpu configure -event reset-start "omap3.cpu mww $PRM_RSTCTRL 2"
-omap3.cpu configure -event reset-assert-pre "omap3_dbginit"
+# be absolutely certain the JTAG clock will work with the worst-case
+# 16.8MHz/2 = 8.4MHz core clock, even before a bootloader kicks in.
+# OK to speed up *after* PLL and clock tree setup.
+jtag_rclk 1000
+$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
+# REVISIT This assumes that SRST is unavailable, so we must assert reset
+# ourselves using PRM_RSTCTRL. RST_GS (2) is a warm reset, like ICEpick
+# would issue. RST_DPLL3 (4) is a cold reset.
+set PRM_RSTCTRL 0x48307250
+$_TARGETNAME configure -event reset-assert-pre "$_TARGETNAME mww $PRM_RSTCTRL 2"
+$_TARGETNAME configure -event reset-assert-post "omap3_dbginit $_TARGETNAME"