summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/target/cortex_m3.c56
1 files changed, 39 insertions, 17 deletions
diff --git a/src/target/cortex_m3.c b/src/target/cortex_m3.c
index 62615743..ea20dfd1 100644
--- a/src/target/cortex_m3.c
+++ b/src/target/cortex_m3.c
@@ -760,11 +760,14 @@ int cortex_m3_assert_reset(target_t *target)
target_state_name(target));
enum reset_types jtag_reset_config = jtag_get_reset_config();
+
+ /*
+ * We can reset Cortex-M3 targets using just the NVIC without
+ * requiring SRST, getting a SoC reset (or a core-only reset)
+ * instead of a system reset.
+ */
if (!(jtag_reset_config & RESET_HAS_SRST))
- {
- LOG_ERROR("Can't assert SRST");
- return ERROR_FAIL;
- }
+ assert_srst = 0;
/* Enable debug requests */
mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
@@ -794,15 +797,21 @@ int cortex_m3_assert_reset(target_t *target)
mem_ap_write_atomic_u32(swjdp, DCB_DEMCR, TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
}
- /* following hack is to handle luminary reset
- * when srst is asserted the luminary device seesm to also clear the debug registers
- * which does not match the armv7 debug TRM */
-
+ /*
+ * When nRST is asserted on most Stellaris devices, it clears some of
+ * the debug state. The ARMv7M and Cortex-M3 TRMs say that's wrong;
+ * and OpenOCD depends on those TRMs. So we won't use SRST on those
+ * chips. (Only power-on reset should affect debug state, beyond a
+ * few specified bits; not the chip's nRST input, wired to SRST.)
+ *
+ * REVISIT current errata specs don't seem to cover this issue.
+ * Do we have more details than this email?
+ * https://lists.berlios.de/pipermail
+ * /openocd-development/2008-August/003065.html
+ */
if (strcmp(target->variant, "lm3s") == 0)
{
- /* get revision of lm3s target, only early silicon has this issue
- * Fury Rev B, DustDevil Rev B, Tempest all ok */
-
+ /* Check for silicon revisions with the issue. */
uint32_t did0;
if (target_read_u32(target, 0x400fe000, &did0) == ERROR_OK)
@@ -816,10 +825,16 @@ int cortex_m3_assert_reset(target_t *target)
case 1:
case 3:
- /* only Fury/DustDevil rev A suffer reset problems */
+ /* Fury and DustDevil rev A have
+ * this nRST problem. It should
+ * be fixed in rev B silicon.
+ */
if (((did0 >> 8) & 0xff) == 0)
assert_srst = 0;
break;
+ case 4:
+ /* Tempest should be fine. */
+ break;
}
}
}
@@ -838,13 +853,20 @@ int cortex_m3_assert_reset(target_t *target)
}
else
{
- /* this causes the luminary device to reset using the watchdog */
- mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR, AIRCR_VECTKEY | AIRCR_SYSRESETREQ);
- LOG_DEBUG("Using Luminary Reset: SYSRESETREQ");
+ /* Use a standard Cortex-M3 software reset mechanism.
+ * SYSRESETREQ will reset SoC peripherals outside the
+ * core, like watchdog timers, if the SoC wires it up
+ * correctly. Else VECRESET can reset just the core.
+ */
+ mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR,
+ AIRCR_VECTKEY | AIRCR_SYSRESETREQ);
+ LOG_DEBUG("Using Cortex-M3 SYSRESETREQ");
{
- /* I do not know why this is necessary, but it fixes strange effects
- * (step/resume cause a NMI after reset) on LM3S6918 -- Michael Schwingen */
+ /* I do not know why this is necessary, but it
+ * fixes strange effects (step/resume cause NMI
+ * after reset) on LM3S6918 -- Michael Schwingen
+ */
uint32_t tmp;
mem_ap_read_atomic_u32(swjdp, NVIC_AIRCR, &tmp);
}