summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--tcl/chip/atmel/at91/at91sam9261.cfg90
-rw-r--r--tcl/chip/atmel/at91/at91sam9261_matrix.cfg46
2 files changed, 136 insertions, 0 deletions
diff --git a/tcl/chip/atmel/at91/at91sam9261.cfg b/tcl/chip/atmel/at91/at91sam9261.cfg
new file mode 100644
index 00000000..61b0c0bf
--- /dev/null
+++ b/tcl/chip/atmel/at91/at91sam9261.cfg
@@ -0,0 +1,90 @@
+#
+# Peripheral identifiers/interrupts.
+#
+set AT91_ID_FIQ 0 ;# Advanced Interrupt Controller (FIQ)
+set AT91_ID_SYS 1 ;# System Peripherals
+set AT91SAM9261_ID_PIOA 2 ;# Parallel IO Controller A
+set AT91SAM9261_ID_PIOB 3 ;# Parallel IO Controller B
+set AT91SAM9261_ID_PIOC 4 ;# Parallel IO Controller C
+set AT91SAM9261_ID_US0 6 ;# USART 0
+set AT91SAM9261_ID_US1 7 ;# USART 1
+set AT91SAM9261_ID_US2 8 ;# USART 2
+set AT91SAM9261_ID_MCI 9 ;# Multimedia Card Interface
+set AT91SAM9261_ID_UDP 10 ;# USB Device Port
+set AT91SAM9261_ID_TWI 11 ;# Two-Wire Interface
+set AT91SAM9261_ID_SPI0 12 ;# Serial Peripheral Interface 0
+set AT91SAM9261_ID_SPI1 13 ;# Serial Peripheral Interface 1
+set AT91SAM9261_ID_SSC0 14 ;# Serial Synchronous Controller 0
+set AT91SAM9261_ID_SSC1 15 ;# Serial Synchronous Controller 1
+set AT91SAM9261_ID_SSC2 16 ;# Serial Synchronous Controller 2
+set AT91SAM9261_ID_TC0 17 ;# Timer Counter 0
+set AT91SAM9261_ID_TC1 18 ;# Timer Counter 1
+set AT91SAM9261_ID_TC2 19 ;# Timer Counter 2
+set AT91SAM9261_ID_UHP 20 ;# USB Host port
+set AT91SAM9261_ID_LCDC 21 ;# LDC Controller
+set AT91SAM9261_ID_IRQ0 29 ;# Advanced Interrupt Controller (IRQ0)
+set AT91SAM9261_ID_IRQ1 30 ;# Advanced Interrupt Controller (IRQ1)
+set AT91SAM9261_ID_IRQ2 31 ;# Advanced Interrupt Controller (IRQ2)
+
+
+#
+# User Peripheral physical base addresses.
+#
+set AT91SAM9261_BASE_TCB0 0xfffa0000
+set AT91SAM9261_BASE_TC0 0xfffa0000
+set AT91SAM9261_BASE_TC1 0xfffa0040
+set AT91SAM9261_BASE_TC2 0xfffa0080
+set AT91SAM9261_BASE_UDP 0xfffa4000
+set AT91SAM9261_BASE_MCI 0xfffa8000
+set AT91SAM9261_BASE_TWI 0xfffac000
+set AT91SAM9261_BASE_US0 0xfffb0000
+set AT91SAM9261_BASE_US1 0xfffb4000
+set AT91SAM9261_BASE_US2 0xfffb8000
+set AT91SAM9261_BASE_SSC0 0xfffbc000
+set AT91SAM9261_BASE_SSC1 0xfffc0000
+set AT91SAM9261_BASE_SSC2 0xfffc4000
+set AT91SAM9261_BASE_SPI0 0xfffc8000
+set AT91SAM9261_BASE_SPI1 0xfffcc000
+set AT91_BASE_SYS 0xffffea00
+
+
+#
+# System Peripherals (offset from AT91_BASE_SYS)
+#
+set AT91_SDRAMC 0xffffea00
+set AT91_SMC 0xffffec00
+set AT91_MATRIX 0xffffee00
+set AT91_AIC 0xfffff000
+set AT91_DBGU 0xfffff200
+set AT91_PIOA 0xfffff400
+set AT91_PIOB 0xfffff600
+set AT91_PIOC 0xfffff800
+set AT91_PMC 0xfffffc00
+set AT91_RSTC 0xfffffd00
+set AT91_SHDWC 0xfffffd10
+set AT91_RTT 0xfffffd20
+set AT91_PIT 0xfffffd30
+set AT91_WDT 0xfffffd40
+set AT91_GPBR 0xfffffd50
+
+set AT91_USART0 $AT91SAM9261_BASE_US0
+set AT91_USART1 $AT91SAM9261_BASE_US1
+set AT91_USART2 $AT91SAM9261_BASE_US2
+
+
+#
+# Internal Memory.
+#
+set AT91SAM9261_SRAM_BASE 0x00300000 ;# Internal SRAM base address
+set AT91SAM9261_SRAM_SIZE 0x00028000 ;# Internal SRAM size (160Kb)
+
+set AT91SAM9261_ROM_BASE 0x00400000 ;# Internal ROM base address
+set AT91SAM9261_ROM_SIZE 0x00008000 ;# Internal ROM size (32Kb)
+
+set AT91SAM9261_UHP_BASE 0x00500000 ;# USB Host controller
+set AT91SAM9261_LCDC_BASE 0x00600000 ;# LDC controller
+
+#
+# Cpu Name
+#
+set AT91_CPU_NAME "AT91SAM9261"
diff --git a/tcl/chip/atmel/at91/at91sam9261_matrix.cfg b/tcl/chip/atmel/at91/at91sam9261_matrix.cfg
new file mode 100644
index 00000000..dc8de237
--- /dev/null
+++ b/tcl/chip/atmel/at91/at91sam9261_matrix.cfg
@@ -0,0 +1,46 @@
+
+set AT91_MATRIX_MCFG [expr ($AT91_MATRIX + 0x00)] ;# Master Configuration Register #
+set AT91_MATRIX_RCB0 [expr (1 << 0)] ;# Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master)
+set AT91_MATRIX_RCB1 [expr (1 << 1)] ;# Remap Command for AHB Master 1 (ARM926EJ-S Data Master)
+
+set AT91_MATRIX_SCFG0 [expr ($AT91_MATRIX + 0x04)] ;# Slave Configuration Register 0
+set AT91_MATRIX_SCFG1 [expr ($AT91_MATRIX + 0x08)] ;# Slave Configuration Register 1
+set AT91_MATRIX_SCFG2 [expr ($AT91_MATRIX + 0x0C)] ;# Slave Configuration Register 2
+set AT91_MATRIX_SCFG3 [expr ($AT91_MATRIX + 0x10)] ;# Slave Configuration Register 3
+set AT91_MATRIX_SCFG4 [expr ($AT91_MATRIX + 0x14)] ;# Slave Configuration Register 4
+set AT91_MATRIX_SLOT_CYCLE [expr (0xff << 0)] ;# Maximum Number of Allowed Cycles for a Burst
+set AT91_MATRIX_DEFMSTR_TYPE [expr (3 << 16)] ;# Default Master Type
+set AT91_MATRIX_DEFMSTR_TYPE_NONE [expr (0 << 16)]
+set AT91_MATRIX_DEFMSTR_TYPE_LAST [expr (1 << 16)]
+set AT91_MATRIX_DEFMSTR_TYPE_FIXED [expr (2 << 16)]
+set AT91_MATRIX_FIXED_DEFMSTR [expr (7 << 18)] ;# Fixed Index of Default Master
+
+set AT91_MATRIX_TCR [expr ($AT91_MATRIX + 0x24)] ;# TCM Configuration Register
+set AT91_MATRIX_ITCM_SIZE [expr (0xf << 0)] ;# Size of ITCM enabled memory block
+set AT91_MATRIX_ITCM_0 [expr (0 << 0)]
+set AT91_MATRIX_ITCM_16 [expr (5 << 0)]
+set AT91_MATRIX_ITCM_32 [expr (6 << 0)]
+set AT91_MATRIX_ITCM_64 [expr (7 << 0)]
+set AT91_MATRIX_DTCM_SIZE [expr (0xf << 4)] ;# Size of DTCM enabled memory block
+set AT91_MATRIX_DTCM_0 [expr (0 << 4)]
+set AT91_MATRIX_DTCM_16 [expr (5 << 4)]
+set AT91_MATRIX_DTCM_32 [expr (6 << 4)]
+set AT91_MATRIX_DTCM_64 [expr (7 << 4)]
+
+set AT91_MATRIX_EBICSA [expr ($AT91_MATRIX + 0x30)] ;# EBI Chip Select Assignment Register
+set AT91_MATRIX_CS1A [expr (1 << 1)] ;# Chip Select 1 Assignment
+set AT91_MATRIX_CS1A_SMC [expr (0 << 1)]
+set AT91_MATRIX_CS1A_SDRAMC [expr (1 << 1)]
+set AT91_MATRIX_CS3A [expr (1 << 3)] ;# Chip Select 3 Assignment
+set AT91_MATRIX_CS3A_SMC [expr (0 << 3)]
+set AT91_MATRIX_CS3A_SMC_SMARTMEDIA [expr (1 << 3)]
+set AT91_MATRIX_CS4A [expr (1 << 4)] ;# Chip Select 4 Assignment
+set AT91_MATRIX_CS4A_SMC [expr (0 << 4)]
+set AT91_MATRIX_CS4A_SMC_CF1 [expr (1 << 4)]
+set AT91_MATRIX_CS5A [expr (1 << 5)] ;# Chip Select 5 Assignment
+set AT91_MATRIX_CS5A_SMC [expr (0 << 5)]
+set AT91_MATRIX_CS5A_SMC_CF2 [expr (1 << 5)]
+set AT91_MATRIX_DBPUC [expr (1 << 8)] ;# Data Bus Pull-up Configuration
+
+set AT91_MATRIX_USBPUCR [expr ($AT91_MATRIX + 0x34)] ;# USB Pad Pull-Up Control Register
+set AT91_MATRIX_USBPUCR_PUON [expr (1 << 30)] ;# USB Device PAD Pull-up Enable