summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/flash/stellaris.c156
-rw-r--r--src/flash/stellaris.h6
2 files changed, 143 insertions, 19 deletions
diff --git a/src/flash/stellaris.c b/src/flash/stellaris.c
index 3f629dee..f479af04 100644
--- a/src/flash/stellaris.c
+++ b/src/flash/stellaris.c
@@ -257,7 +257,10 @@ static int stellaris_flash_bank_command(struct command_context_s *cmd_ctx, char
/* part wasn't probed for info yet */
stellaris_info->did1 = 0;
- /* TODO Use an optional main oscillator clock rate in kHz from arg[6] */
+ /* TODO Specify the main crystal speed in kHz using an optional
+ * argument; ditto, the speed of an external oscillator used
+ * instead of a crystal. Avoid programming flash using IOSC.
+ */
return ERROR_OK;
}
@@ -294,7 +297,8 @@ static int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size)
}
printed = snprintf(buf,
buf_size,
- "\nLMI Stellaris information: Chip is class %i(%s) %s v%c.%i\n",
+ "\nTI/LMI Stellaris information: Chip is "
+ "class %i (%s) %s rev %c%i\n",
device_class,
StellarisClassname[device_class],
stellaris_info->target_name,
@@ -305,10 +309,11 @@ static int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size)
printed = snprintf(buf,
buf_size,
- "did1: 0x%8.8" PRIx32 ", arch: 0x%4.4" PRIx32 ", eproc: %s, ramsize:%ik, flashsize: %ik\n",
+ "did1: 0x%8.8" PRIx32 ", arch: 0x%4.4" PRIx32
+ ", eproc: %s, ramsize: %ik, flashsize: %ik\n",
stellaris_info->did1,
stellaris_info->did1,
- "ARMV7M",
+ "ARMv7M",
(int)((1 + ((stellaris_info->dc0 >> 16) & 0xFFFF))/4),
(int)((1 + (stellaris_info->dc0 & 0xFFFF))*2));
buf += printed;
@@ -316,9 +321,12 @@ static int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size)
printed = snprintf(buf,
buf_size,
- "master clock(estimated): %ikHz, rcc is 0x%" PRIx32 " \n",
+ "master clock: %ikHz%s, "
+ "rcc is 0x%" PRIx32 ", rcc2 is 0x%" PRIx32 "\n",
(int)(stellaris_info->mck_freq / 1000),
- stellaris_info->rcc);
+ stellaris_info->mck_desc,
+ stellaris_info->rcc,
+ stellaris_info->rcc2);
buf += printed;
buf_size -= printed;
@@ -353,38 +361,103 @@ static uint32_t stellaris_get_flash_status(flash_bank_t *bank)
/** Read clock configuration and set stellaris_info->usec_clocks*/
+static const unsigned rcc_xtal[32] = {
+ [0x00] = 1000000, /* no pll */
+ [0x01] = 1843200, /* no pll */
+ [0x02] = 2000000, /* no pll */
+ [0x03] = 2457600, /* no pll */
+
+ [0x04] = 3579545,
+ [0x05] = 3686400,
+ [0x06] = 4000000, /* usb */
+ [0x07] = 4096000,
+
+ [0x08] = 4915200,
+ [0x09] = 5000000, /* usb */
+ [0x0a] = 5120000,
+ [0x0b] = 6000000, /* (reset) usb */
+
+ [0x0c] = 6144000,
+ [0x0d] = 7372800,
+ [0x0e] = 8000000, /* usb */
+ [0x0f] = 8192000,
+
+ /* parts before DustDevil use just 4 bits for xtal spec */
+
+ [0x10] = 10000000, /* usb */
+ [0x11] = 12000000, /* usb */
+ [0x12] = 12288000,
+ [0x13] = 13560000,
+
+ [0x14] = 14318180,
+ [0x15] = 16000000, /* usb */
+ [0x16] = 16384000,
+};
+
static void stellaris_read_clock_info(flash_bank_t *bank)
{
stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
target_t *target = bank->target;
- uint32_t rcc, pllcfg, sysdiv, usesysdiv, bypass, oscsrc;
+ uint32_t rcc, rcc2, pllcfg, sysdiv, usesysdiv, bypass, oscsrc;
+ unsigned xtal;
unsigned long mainfreq;
target_read_u32(target, SCB_BASE | RCC, &rcc);
LOG_DEBUG("Stellaris RCC %" PRIx32 "", rcc);
+
+ target_read_u32(target, SCB_BASE | RCC2, &rcc2);
+ LOG_DEBUG("Stellaris RCC2 %" PRIx32 "", rcc);
+
target_read_u32(target, SCB_BASE | PLLCFG, &pllcfg);
LOG_DEBUG("Stellaris PLLCFG %" PRIx32 "", pllcfg);
+
stellaris_info->rcc = rcc;
+ stellaris_info->rcc = rcc2;
sysdiv = (rcc >> 23) & 0xF;
usesysdiv = (rcc >> 22) & 0x1;
bypass = (rcc >> 11) & 0x1;
oscsrc = (rcc >> 4) & 0x3;
- /* xtal = (rcc >> 6)&0xF; */
+ xtal = (rcc >> 6) & stellaris_info->xtal_mask;
+
+ /* NOTE: post-Sandstorm parts have RCC2 which may override
+ * parts of RCC ... with more sysdiv options, option for
+ * 32768 Hz mainfreq, PLL controls. On Sandstorm it reads
+ * as zero, so the "use RCC2" flag is always clear.
+ */
+ if (rcc2 & (1 << 31)) {
+ sysdiv = (rcc2 >> 23) & 0x3F;
+ bypass = (rcc2 >> 11) & 0x1;
+ oscsrc = (rcc2 >> 4) & 0x7;
+
+ /* FIXME Tempest parts have an additional lsb for
+ * fractional sysdiv (200 MHz / 2.5 == 80 MHz)
+ */
+ }
+
+ stellaris_info->mck_desc = "";
+
switch (oscsrc)
{
- case 0:
- mainfreq = 6000000; /* Default xtal */
+ case 0: /* MOSC */
+ mainfreq = rcc_xtal[xtal];
break;
- case 1:
- mainfreq = 22500000; /* Internal osc. 15 MHz +- 50% */
+ case 1: /* IOSC */
+ mainfreq = stellaris_info->iosc_freq;
+ stellaris_info->mck_desc = stellaris_info->iosc_desc;
break;
- case 2:
- mainfreq = 5625000; /* Internal osc. / 4 */
+ case 2: /* IOSC/4 */
+ mainfreq = stellaris_info->iosc_freq / 4;
+ stellaris_info->mck_desc = stellaris_info->iosc_desc;
break;
- case 3:
- LOG_WARNING("Invalid oscsrc (3) in rcc register");
- mainfreq = 6000000;
+ case 3: /* lowspeed */
+ /* Sandstorm doesn't have this 30K +/- 30% osc */
+ mainfreq = 30000;
+ stellaris_info->mck_desc = " (±30%)";
+ break;
+ case 8: /* hibernation osc */
+ /* not all parts support hibernation */
+ mainfreq = 32768;
break;
default: /* NOTREACHED */
@@ -392,8 +465,11 @@ static void stellaris_read_clock_info(flash_bank_t *bank)
break;
}
+ /* PLL is used if it's not bypassed; its output is 200 MHz
+ * even when it runs at 400 MHz (adds divide-by-two stage).
+ */
if (!bypass)
- mainfreq = 200000000; /* PLL out frec */
+ mainfreq = 200000000;
if (usesysdiv)
stellaris_info->mck_freq = mainfreq/(1 + sysdiv);
@@ -487,6 +563,48 @@ static int stellaris_read_part_info(struct flash_bank_s *bank)
LOG_WARNING("Unknown did1 version/family, cannot positively identify target as a Stellaris");
}
+ /* For Sandstorm, Fury, DustDevil: current data sheets say IOSC
+ * is 12 MHz, but some older parts have 15 MHz. A few data sheets
+ * even give _both_ numbers! We'll use current numbers; IOSC is
+ * always approximate.
+ *
+ * For Tempest: IOSC is calibrated, 16 MHz
+ */
+ stellaris_info->iosc_freq = 12000000;
+ stellaris_info->iosc_desc = " (±30%)";
+ stellaris_info->xtal_mask = 0x0f;
+
+ switch ((did0 >> 28) & 0x7) {
+ case 0: /* Sandstorm */
+ /*
+ * Current (2009-August) parts seem to be rev C2 and use 12 MHz.
+ * Parts before rev C0 used 15 MHz; some C0 parts use 15 MHz
+ * (LM3S618), but some other C0 parts are 12 MHz (LM3S811).
+ */
+ if (((did0 >> 16) & 0xff) <= 2) {
+ stellaris_info->iosc_freq = 15000000;
+ stellaris_info->iosc_desc = " (±50%)";
+ }
+ break;
+ case 1:
+ switch ((did0 >> 16) & 0xff) {
+ case 1: /* Fury */
+ break;
+ case 4: /* Tempest */
+ stellaris_info->iosc_freq = 16000000; /* +/- 1% */
+ stellaris_info->iosc_desc = " (±1%)";
+ /* FALL THROUGH */
+ case 3: /* DustDevil */
+ stellaris_info->xtal_mask = 0x1f;
+ break;
+ default:
+ LOG_WARNING("Unknown did0 class");
+ }
+ default:
+ break;
+ LOG_WARNING("Unknown did0 version");
+ }
+
for (i = 0; StellarisParts[i].partno; i++)
{
if (StellarisParts[i].partno == ((did1 >> 16) & 0xFF))
@@ -547,7 +665,7 @@ static int stellaris_protect_check(struct flash_bank_s *bank)
if (stellaris_info->did1 == 0)
{
- LOG_WARNING("Cannot identify target as an AT91SAM");
+ LOG_WARNING("Cannot identify target as Stellaris");
return ERROR_FLASH_OPERATION_FAILED;
}
diff --git a/src/flash/stellaris.h b/src/flash/stellaris.h
index bf07c70e..eaf3d481 100644
--- a/src/flash/stellaris.h
+++ b/src/flash/stellaris.h
@@ -45,8 +45,13 @@ typedef struct stellaris_flash_bank_s
/* main clock status */
uint32_t rcc;
+ uint32_t rcc2;
uint8_t mck_valid;
+ uint8_t xtal_mask;
+ uint32_t iosc_freq;
uint32_t mck_freq;
+ const char *iosc_desc;
+ const char *mck_desc;
} stellaris_flash_bank_t;
/* STELLARIS control registers */
@@ -62,6 +67,7 @@ typedef struct stellaris_flash_bank_s
#define RIS 0x050
#define RCC 0x060
#define PLLCFG 0x064
+#define RCC2 0x070
#define FMPRE 0x130
#define FMPPE 0x134
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-01 08:11:21 +0000