summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/Makefile.am6
-rw-r--r--src/flash/Makefile.am2
-rw-r--r--src/flash/startup.tcl16
-rw-r--r--src/helper/Makefile.am2
-rw-r--r--src/helper/startup.tcl231
-rw-r--r--src/jtag/Makefile.am2
-rw-r--r--src/jtag/startup.tcl41
-rw-r--r--src/server/Makefile.am1
-rw-r--r--src/server/startup.tcl8
-rw-r--r--src/target/Makefile.am4
-rw-r--r--src/target/startup.tcl165
11 files changed, 246 insertions, 232 deletions
diff --git a/src/Makefile.am b/src/Makefile.am
index 2f17ba4d..7a886811 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -99,7 +99,11 @@ libopenocd_la_LIBADD += -lmicrohttpd
endif
STARTUP_TCL_SRCS = \
- $(srcdir)/helper/startup.tcl
+ $(srcdir)/helper/startup.tcl \
+ $(srcdir)/jtag/startup.tcl \
+ $(srcdir)/target/startup.tcl \
+ $(srcdir)/flash/startup.tcl \
+ $(srcdir)/server/startup.tcl
EXTRA_DIST = $(STARTUP_TCL_SRCS)
diff --git a/src/flash/Makefile.am b/src/flash/Makefile.am
index bbcc34c3..b687182d 100644
--- a/src/flash/Makefile.am
+++ b/src/flash/Makefile.am
@@ -79,4 +79,6 @@ noinst_HEADERS = \
s3c24xx_nand.h \
s3c24xx_regs_nand.h
+EXTRA_DIST = startup.tcl
+
MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
diff --git a/src/flash/startup.tcl b/src/flash/startup.tcl
new file mode 100644
index 00000000..fcebbe01
--- /dev/null
+++ b/src/flash/startup.tcl
@@ -0,0 +1,16 @@
+# Defines basic Tcl procs for OpenOCD flash module
+
+# Show flash in human readable form
+# This is an example of a human readable form of a low level fn
+proc flash_banks {} {
+ set i 0
+ set result ""
+ foreach {a} [ocd_flash_banks] {
+ if {$i > 0} {
+ set result "$result\n"
+ }
+ set result [format "$result#%d: %s at 0x%08x, size 0x%08x, buswidth %d, chipwidth %d" $i $a(name) $a(base) $a(size) $a(bus_width) $a(chip_width)]
+ set i [expr $i+1]
+ }
+ return $result
+}
diff --git a/src/helper/Makefile.am b/src/helper/Makefile.am
index 9557f5b2..22b3c330 100644
--- a/src/helper/Makefile.am
+++ b/src/helper/Makefile.am
@@ -50,6 +50,8 @@ noinst_HEADERS = \
system.h \
bin2char.c
+EXTRA_DIST = startup.tcl
+
BIN2C = bin2char$(EXEEXT_FOR_BUILD)
BUILT_SOURCES = $(BIN2C)
diff --git a/src/helper/startup.tcl b/src/helper/startup.tcl
index 096f03a8..eefb690e 100644
--- a/src/helper/startup.tcl
+++ b/src/helper/startup.tcl
@@ -1,11 +1,8 @@
-#
-# Defines basic Tcl procs that must be there for
-# OpenOCD to work.
+# Defines basic Tcl procs that must exist for OpenOCD scripts to work.
#
# Embedded into OpenOCD executable
#
-
# Help text list. A list of command + help text pairs.
#
# Commands can be more than one word and they are stored
@@ -22,21 +19,6 @@ proc get_help_text {} {
}
-# Show flash in human readable form
-# This is an example of a human readable form of a low level fn
-proc flash_banks {} {
- set i 0
- set result ""
- foreach {a} [ocd_flash_banks] {
- if {$i > 0} {
- set result "$result\n"
- }
- set result [format "$result#%d: %s at 0x%08x, size 0x%08x, buswidth %d, chipwidth %d" $i $a(name) $a(base) $a(size) $a(bus_width) $a(chip_width)]
- set i [expr $i+1]
- }
- return $result
-}
-
# We need to explicitly redirect this to the OpenOCD command
# as Tcl defines the exit proc
proc exit {} {
@@ -133,207 +115,6 @@ proc script {filename} {
add_help_text script "<filename> - filename of OpenOCD script (tcl) to run"
-# Handle GDB 'R' packet. Can be overriden by configuration script,
-# but it's not something one would expect target scripts to do
-# normally
-proc ocd_gdb_restart {target_id} {
- # Fix!!! we're resetting all targets here! Really we should reset only
- # one target
- reset halt
-}
-
-#########
-
-# Temporary migration aid. May be removed starting in January 2011.
-proc armv4_5 params {
- echo "DEPRECATED! use 'arm $params' not 'armv4_5 $params'"
- arm $params
-}
-
-#########
-
-# This reset logic may be overridden by board/target/... scripts as needed
-# to provide a reset that, if possible, is close to a power-up reset.
-#
-# Exit requirements include: (a) JTAG must be working, (b) the scan
-# chain was validated with "jtag arp_init" (or equivalent), (c) nothing
-# stays in reset. No TAP-specific scans were performed. It's OK if
-# some targets haven't been reset yet; they may need TAP-specific scans.
-#
-# The "mode" values include: halt, init, run (from "reset" command);
-# startup (at OpenOCD server startup, when JTAG may not yet work); and
-# potentially more (for reset types like cold, warm, etc)
-proc init_reset { mode } {
- jtag arp_init-reset
-}
-
-
-global in_process_reset
-set in_process_reset 0
-
-# Catch reset recursion
-proc ocd_process_reset { MODE } {
- global in_process_reset
- if {$in_process_reset} {
- set in_process_reset 0
- return -code error "'reset' can not be invoked recursively"
- }
-
- set in_process_reset 1
- set success [expr [catch {ocd_process_reset_inner $MODE} result]==0]
- set in_process_reset 0
-
- if {$success} {
- return $result
- } else {
- return -code error $result
- }
-}
-
-proc ocd_process_reset_inner { MODE } {
- set targets [target names]
-
- # If this target must be halted...
- set halt -1
- if { 0 == [string compare $MODE halt] } {
- set halt 1
- }
- if { 0 == [string compare $MODE init] } {
- set halt 1;
- }
- if { 0 == [string compare $MODE run ] } {
- set halt 0;
- }
- if { $halt < 0 } {
- return -error "Invalid mode: $MODE, must be one of: halt, init, or run";
- }
-
- # Target event handlers *might* change which TAPs are enabled
- # or disabled, so we fire all of them. But don't issue any
- # target "arp_*" commands, which may issue JTAG transactions,
- # unless we know the underlying TAP is active.
- #
- # NOTE: ARP == "Advanced Reset Process" ... "advanced" is
- # relative to a previous restrictive scheme
-
- foreach t $targets {
- # New event script.
- $t invoke-event reset-start
- }
-
- # Use TRST or TMS/TCK operations to reset all the tap controllers.
- # TAP reset events get reported; they might enable some taps.
- init_reset $MODE
-
- # Examine all targets on enabled taps.
- foreach t $targets {
- if {[jtag tapisenabled [$t cget -chain-position]]} {
- $t arp_examine
- }
- }
-
- # Assert SRST, and report the pre/post events.
- # Note: no target sees SRST before "pre" or after "post".
- foreach t $targets {
- $t invoke-event reset-assert-pre
- }
- foreach t $targets {
- # C code needs to know if we expect to 'halt'
- if {[jtag tapisenabled [$t cget -chain-position]]} {
- $t arp_reset assert $halt
- }
- }
- foreach t $targets {
- $t invoke-event reset-assert-post
- }
-
- # Now de-assert SRST, and report the pre/post events.
- # Note: no target sees !SRST before "pre" or after "post".
- foreach t $targets {
- $t invoke-event reset-deassert-pre
- }
- foreach t $targets {
- # Again, de-assert code needs to know if we 'halt'
- if {[jtag tapisenabled [$t cget -chain-position]]} {
- $t arp_reset deassert $halt
- }
- }
- foreach t $targets {
- $t invoke-event reset-deassert-post
- }
-
- # Pass 1 - Now wait for any halt (requested as part of reset
- # assert/deassert) to happen. Ideally it takes effect without
- # first executing any instructions.
- if { $halt } {
- foreach t $targets {
- if {[jtag tapisenabled [$t cget -chain-position]] == 0} {
- continue
- }
-
- # Wait upto 1 second for target to halt. Why 1sec? Cause
- # the JTAG tap reset signal might be hooked to a slow
- # resistor/capacitor circuit - and it might take a while
- # to charge
-
- # Catch, but ignore any errors.
- catch { $t arp_waitstate halted 1000 }
-
- # Did we succeed?
- set s [$t curstate]
-
- if { 0 != [string compare $s "halted" ] } {
- return -error [format "TARGET: %s - Not halted" $t]
- }
- }
- }
-
- #Pass 2 - if needed "init"
- if { 0 == [string compare init $MODE] } {
- foreach t $targets {
- if {[jtag tapisenabled [$t cget -chain-position]] == 0} {
- continue
- }
-
- set err [catch "$t arp_waitstate halted 5000"]
- # Did it halt?
- if { $err == 0 } {
- $t invoke-event reset-init
- }
- }
- }
-
- foreach t $targets {
- $t invoke-event reset-end
- }
-}
-
-#########
-
-# REVISIT power_restore, power_dropout, srst_deasserted, srst_asserted
-# are currently neither documented nor supported except on ZY1000.
-
-proc power_restore {} {
- puts "Sensed power restore."
- reset init
-}
-
-add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
-
-proc power_dropout {} {
- puts "Sensed power dropout."
-}
-
-proc srst_deasserted {} {
- puts "Sensed nSRST deasserted."
- reset init
-}
-add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
-
-proc srst_asserted {} {
- puts "Sensed nSRST asserted."
-}
-
#########
# catch any exceptions, capture output and return output
@@ -343,13 +124,3 @@ proc capture_catch {a} {
} result
return $result
}
-
-
-# Executed during "init". Can be overridden
-# by board/target/... scripts
-proc jtag_init {} {
- if {[catch {jtag arp_init} err]!=0} {
- # try resetting additionally
- init_reset startup
- }
-}
diff --git a/src/jtag/Makefile.am b/src/jtag/Makefile.am
index ba722c6d..85d98c07 100644
--- a/src/jtag/Makefile.am
+++ b/src/jtag/Makefile.am
@@ -94,4 +94,6 @@ noinst_HEADERS = \
rlink/st7.h \
minidummy/jtag_minidriver.h
+EXTRA_DIST = startup.tcl
+
MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl
new file mode 100644
index 00000000..999f5d02
--- /dev/null
+++ b/src/jtag/startup.tcl
@@ -0,0 +1,41 @@
+# Defines basic Tcl procs for OpenOCD JTAG module
+
+# Executed during "init". Can be overridden
+# by board/target/... scripts
+proc jtag_init {} {
+ if {[catch {jtag arp_init} err]!=0} {
+ # try resetting additionally
+ init_reset startup
+ }
+}
+
+#########
+
+# TODO: power_restore and power_dropout are currently neither
+# documented nor supported except on ZY1000.
+
+proc power_restore {} {
+ puts "Sensed power restore."
+ reset init
+}
+
+add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
+
+proc power_dropout {} {
+ puts "Sensed power dropout."
+}
+
+#########
+
+# TODO: srst_deasserted and srst_asserted are currently neither
+# documented nor supported except on ZY1000.
+
+proc srst_deasserted {} {
+ puts "Sensed nSRST deasserted."
+ reset init
+}
+add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
+
+proc srst_asserted {} {
+ puts "Sensed nSRST asserted."
+}
diff --git a/src/server/Makefile.am b/src/server/Makefile.am
index 6e52fdfb..bb7d5ef3 100644
--- a/src/server/Makefile.am
+++ b/src/server/Makefile.am
@@ -35,6 +35,7 @@ nobase_dist_pkgdata_DATA = \
endif
EXTRA_DIST = \
+ startup.tcl \
httpd/readme.txt \
httpd/menu.xml \
httpd/menu.xsl \
diff --git a/src/server/startup.tcl b/src/server/startup.tcl
new file mode 100644
index 00000000..677bb2de
--- /dev/null
+++ b/src/server/startup.tcl
@@ -0,0 +1,8 @@
+# Handle GDB 'R' packet. Can be overriden by configuration script,
+# but it's not something one would expect target scripts to do
+# normally
+proc ocd_gdb_restart {target_id} {
+ # Fix!!! we're resetting all targets here! Really we should reset only
+ # one target
+ reset halt
+}
diff --git a/src/target/Makefile.am b/src/target/Makefile.am
index 9dd0bdc9..23aea82c 100644
--- a/src/target/Makefile.am
+++ b/src/target/Makefile.am
@@ -13,7 +13,9 @@ AM_CPPFLAGS = \
BIN2C = $(top_builddir)/src/helper/bin2char$(EXEEXT_FOR_BUILD)
DEBUG_HANDLER = $(srcdir)/xscale/debug_handler.bin
-EXTRA_DIST = $(DEBUG_HANDLER)
+EXTRA_DIST = \
+ startup.tcl \
+ $(DEBUG_HANDLER)
DEBUG_HEADER = xscale_debug.h
BUILT_SOURCES = $(DEBUG_HEADER)
diff --git a/src/target/startup.tcl b/src/target/startup.tcl
new file mode 100644
index 00000000..d480f335
--- /dev/null
+++ b/src/target/startup.tcl
@@ -0,0 +1,165 @@
+#########
+
+# This reset logic may be overridden by board/target/... scripts as needed
+# to provide a reset that, if possible, is close to a power-up reset.
+#
+# Exit requirements include: (a) JTAG must be working, (b) the scan
+# chain was validated with "jtag arp_init" (or equivalent), (c) nothing
+# stays in reset. No TAP-specific scans were performed. It's OK if
+# some targets haven't been reset yet; they may need TAP-specific scans.
+#
+# The "mode" values include: halt, init, run (from "reset" command);
+# startup (at OpenOCD server startup, when JTAG may not yet work); and
+# potentially more (for reset types like cold, warm, etc)
+proc init_reset { mode } {
+ jtag arp_init-reset
+}
+
+
+global in_process_reset
+set in_process_reset 0
+
+# Catch reset recursion
+proc ocd_process_reset { MODE } {
+ global in_process_reset
+ if {$in_process_reset} {
+ set in_process_reset 0
+ return -code error "'reset' can not be invoked recursively"
+ }
+
+ set in_process_reset 1
+ set success [expr [catch {ocd_process_reset_inner $MODE} result]==0]
+ set in_process_reset 0
+
+ if {$success} {
+ return $result
+ } else {
+ return -code error $result
+ }
+}
+
+proc ocd_process_reset_inner { MODE } {
+ set targets [target names]
+
+ # If this target must be halted...
+ set halt -1
+ if { 0 == [string compare $MODE halt] } {
+ set halt 1
+ }
+ if { 0 == [string compare $MODE init] } {
+ set halt 1;
+ }
+ if { 0 == [string compare $MODE run ] } {
+ set halt 0;
+ }
+ if { $halt < 0 } {
+ return -error "Invalid mode: $MODE, must be one of: halt, init, or run";
+ }
+
+ # Target event handlers *might* change which TAPs are enabled
+ # or disabled, so we fire all of them. But don't issue any
+ # target "arp_*" commands, which may issue JTAG transactions,
+ # unless we know the underlying TAP is active.
+ #
+ # NOTE: ARP == "Advanced Reset Process" ... "advanced" is
+ # relative to a previous restrictive scheme
+
+ foreach t $targets {
+ # New event script.
+ $t invoke-event reset-start
+ }
+
+ # Use TRST or TMS/TCK operations to reset all the tap controllers.
+ # TAP reset events get reported; they might enable some taps.
+ init_reset $MODE
+
+ # Examine all targets on enabled taps.
+ foreach t $targets {
+ if {[jtag tapisenabled [$t cget -chain-position]]} {
+ $t arp_examine
+ }
+ }
+
+ # Assert SRST, and report the pre/post events.
+ # Note: no target sees SRST before "pre" or after "post".
+ foreach t $targets {
+ $t invoke-event reset-assert-pre
+ }
+ foreach t $targets {
+ # C code needs to know if we expect to 'halt'
+ if {[jtag tapisenabled [$t cget -chain-position]]} {
+ $t arp_reset assert $halt
+ }
+ }
+ foreach t $targets {
+ $t invoke-event reset-assert-post
+ }
+
+ # Now de-assert SRST, and report the pre/post events.
+ # Note: no target sees !SRST before "pre" or after "post".
+ foreach t $targets {
+ $t invoke-event reset-deassert-pre
+ }
+ foreach t $targets {
+ # Again, de-assert code needs to know if we 'halt'
+ if {[jtag tapisenabled [$t cget -chain-position]]} {
+ $t arp_reset deassert $halt
+ }
+ }
+ foreach t $targets {
+ $t invoke-event reset-deassert-post
+ }
+
+ # Pass 1 - Now wait for any halt (requested as part of reset
+ # assert/deassert) to happen. Ideally it takes effect without
+ # first executing any instructions.
+ if { $halt } {
+ foreach t $targets {
+ if {[jtag tapisenabled [$t cget -chain-position]] == 0} {
+ continue
+ }
+
+ # Wait upto 1 second for target to halt. Why 1sec? Cause
+ # the JTAG tap reset signal might be hooked to a slow
+ # resistor/capacitor circuit - and it might take a while
+ # to charge
+
+ # Catch, but ignore any errors.
+ catch { $t arp_waitstate halted 1000 }
+
+ # Did we succeed?
+ set s [$t curstate]
+
+ if { 0 != [string compare $s "halted" ] } {
+ return -error [format "TARGET: %s - Not halted" $t]
+ }
+ }
+ }
+
+ #Pass 2 - if needed "init"
+ if { 0 == [string compare init $MODE] } {
+ foreach t $targets {
+ if {[jtag tapisenabled [$t cget -chain-position]] == 0} {
+ continue
+ }
+
+ set err [catch "$t arp_waitstate halted 5000"]
+ # Did it halt?
+ if { $err == 0 } {
+ $t invoke-event reset-init
+ }
+ }
+ }
+
+ foreach t $targets {
+ $t invoke-event reset-end
+ }
+}
+
+#########
+
+# Temporary migration aid. May be removed starting in January 2011.
+proc armv4_5 params {
+ echo "DEPRECATED! use 'arm $params' not 'armv4_5 $params'"
+ arm $params
+}