summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--doc/openocd.texi33
-rw-r--r--src/target/cortex_m3.c81
-rw-r--r--src/target/cortex_m3.h5
3 files changed, 115 insertions, 4 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index ffa92c61..8c935583 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -737,7 +737,9 @@ the @command{reset init} command will interfere with debugging
early boot code, which performs some of the same actions
that the @code{reset-init} event handler does.
Likewise, the @command{arm9tdmi vector_catch} command (or
-its @command{xscale vector_catch} sibling) can be a timesaver
+@cindex vector_catch
+its siblings @command{xscale vector_catch}
+and @command{cortex_m3 vector_catch}) can be a timesaver
during some debug sessions, but don't make everyone use that either.
Keep those kinds of debugging aids in your user config file,
along with messaging and tracing setup.
@@ -4738,6 +4740,7 @@ Such cores include the ARM920T, ARM926EJ-S, and ARM966.
@anchor{arm9tdmi vector_catch}
@deffn Command {arm9tdmi vector_catch} [@option{all}|@option{none}|list]
+@cindex vector_catch
Vector Catch hardware provides a sort of dedicated breakpoint
for hardware events such as reset, interrupt, and abort.
You can use this to conserve normal breakpoint resources,
@@ -4927,6 +4930,7 @@ The image @var{type} may be one of
@anchor{xscale vector_catch}
@deffn Command {xscale vector_catch} [mask]
+@cindex vector_catch
Display a bitmask showing the hardware vectors to catch.
If the optional parameter is provided, first set the bitmask to that value.
@end deffn
@@ -5016,6 +5020,33 @@ Disassembles @var{count} Thumb2 instructions starting at @var{address}.
Control masking (disabling) interrupts during target step/resume.
@end deffn
+@deffn Command {cortex_m3 vector_catch} [@option{all}|@option{none}|list]
+@cindex vector_catch
+Vector Catch hardware provides dedicated breakpoints
+for certain hardware events.
+
+Parameters request interception of
+@option{all} of these hardware event vectors,
+@option{none} of them,
+or one or more of the following:
+@option{hard_err} for a HardFault exception;
+@option{mm_err} for a MemManage exception;
+@option{bus_err} for a BusFault exception;
+@option{irq_err},
+@option{state_err},
+@option{chk_err}, or
+@option{nocp_err} for various UsageFault exceptions; or
+@option{reset}.
+If NVIC setup code does not enable them,
+MemManage, BusFault, and UsageFault exceptions
+are mapped to HardFault.
+UsageFault checks for
+divide-by-zero and unaligned access
+must also be explicitly enabled.
+
+This finishes by listing the current vector catch configuration.
+@end deffn
+
@anchor{Software Debug Messages and Tracing}
@section Software Debug Messages and Tracing
@cindex Linux-ARM DCC support
diff --git a/src/target/cortex_m3.c b/src/target/cortex_m3.c
index 8875dddc..62615743 100644
--- a/src/target/cortex_m3.c
+++ b/src/target/cortex_m3.c
@@ -37,6 +37,9 @@
#include "arm_disassembler.h"
+#define ARRAY_SIZE(x) ((int)(sizeof(x)/sizeof((x)[0])))
+
+
/* cli handling */
int cortex_m3_register_commands(struct command_context_s *cmd_ctx);
int handle_cortex_m3_mask_interrupts_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
@@ -174,7 +177,7 @@ int cortex_m3_clear_halt(target_t *target)
/* Read Debug Fault Status Register */
mem_ap_read_atomic_u32(swjdp, NVIC_DFSR, &cortex_m3->nvic_dfsr);
- /* Write Debug Fault Status Register to enable processing to resume ?? Try with and without this !! */
+ /* Clear Debug Fault Status */
mem_ap_write_atomic_u32(swjdp, NVIC_DFSR, cortex_m3->nvic_dfsr);
LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32 "", cortex_m3->nvic_dfsr);
@@ -307,8 +310,6 @@ int cortex_m3_examine_debug_reason(target_t *target)
if ((target->debug_reason != DBG_REASON_DBGRQ)
&& (target->debug_reason != DBG_REASON_SINGLESTEP))
{
- /* INCOMPLETE */
-
if (cortex_m3->nvic_dfsr & DFSR_BKPT)
{
target->debug_reason = DBG_REASON_BREAKPOINT;
@@ -317,6 +318,10 @@ int cortex_m3_examine_debug_reason(target_t *target)
}
else if (cortex_m3->nvic_dfsr & DFSR_DWTTRAP)
target->debug_reason = DBG_REASON_WATCHPOINT;
+ else if (cortex_m3->nvic_dfsr & DFSR_VCATCH)
+ target->debug_reason = DBG_REASON_BREAKPOINT;
+ else /* EXTERNAL, HALTED, DWTTRAP w/o BKPT */
+ target->debug_reason = DBG_REASON_UNDEFINED;
}
return ERROR_OK;
@@ -1703,6 +1708,73 @@ handle_cortex_m3_disassemble_command(struct command_context_s *cmd_ctx,
return ERROR_OK;
}
+static const struct {
+ char name[10];
+ unsigned mask;
+} vec_ids[] = {
+ { "hard_err", VC_HARDERR, },
+ { "int_err", VC_INTERR, },
+ { "bus_err", VC_BUSERR, },
+ { "state_err", VC_STATERR, },
+ { "chk_err", VC_CHKERR, },
+ { "nocp_err", VC_NOCPERR, },
+ { "mm_err", VC_MMERR, },
+ { "reset", VC_CORERESET, },
+};
+
+static int
+handle_cortex_m3_vector_catch_command(struct command_context_s *cmd_ctx,
+ char *cmd, char **argv, int argc)
+{
+ target_t *target = get_current_target(cmd_ctx);
+ armv7m_common_t *armv7m = target->arch_info;
+ swjdp_common_t *swjdp = &armv7m->swjdp_info;
+ uint32_t demcr = 0;
+ int i;
+
+ mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
+
+ if (argc > 0) {
+ unsigned catch = 0;
+
+ if (argc == 1) {
+ if (strcmp(argv[0], "all") == 0) {
+ catch = VC_HARDERR | VC_INTERR | VC_BUSERR
+ | VC_STATERR | VC_CHKERR | VC_NOCPERR
+ | VC_MMERR | VC_CORERESET;
+ goto write;
+ } else if (strcmp(argv[0], "none") == 0) {
+ goto write;
+ }
+ }
+ while (argc-- > 0) {
+ for (i = 0; i < ARRAY_SIZE(vec_ids); i++) {
+ if (strcmp(argv[argc], vec_ids[i].name) != 0)
+ continue;
+ catch |= vec_ids[i].mask;
+ break;
+ }
+ if (i == ARRAY_SIZE(vec_ids)) {
+ LOG_ERROR("No CM3 vector '%s'", argv[argc]);
+ return ERROR_INVALID_ARGUMENTS;
+ }
+ }
+write:
+ demcr &= ~0xffff;
+ demcr |= catch;
+
+ /* write, but don't assume it stuck */
+ mem_ap_write_u32(swjdp, DCB_DEMCR, demcr);
+ mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(vec_ids); i++)
+ command_print(cmd_ctx, "%9s: %s", vec_ids[i].name,
+ (demcr & vec_ids[i].mask) ? "catch" : "ignore");
+
+ return ERROR_OK;
+}
+
int cortex_m3_register_commands(struct command_context_s *cmd_ctx)
{
int retval;
@@ -1719,6 +1791,9 @@ int cortex_m3_register_commands(struct command_context_s *cmd_ctx)
register_command(cmd_ctx, cortex_m3_cmd, "maskisr",
handle_cortex_m3_mask_interrupts_command, COMMAND_EXEC,
"mask cortex_m3 interrupts ['on'|'off']");
+ register_command(cmd_ctx, cortex_m3_cmd, "vector_catch",
+ handle_cortex_m3_vector_catch_command, COMMAND_EXEC,
+ "catch hardware vectors ['all'|'none'|<list>]");
return retval;
}
diff --git a/src/target/cortex_m3.h b/src/target/cortex_m3.h
index e6714d00..4e8cd111 100644
--- a/src/target/cortex_m3.h
+++ b/src/target/cortex_m3.h
@@ -80,7 +80,12 @@ extern char* cortex_m3_state_strings[];
/* DCB_DEMCR bit and field definitions */
#define TRCENA (1 << 24)
#define VC_HARDERR (1 << 10)
+#define VC_INTERR (1 << 9)
#define VC_BUSERR (1 << 8)
+#define VC_STATERR (1 << 7)
+#define VC_CHKERR (1 << 6)
+#define VC_NOCPERR (1 << 5)
+#define VC_MMERR (1 << 4)
#define VC_CORERESET (1 << 0)
#define NVIC_ICTR 0xE000E004