summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--NEWS2
-rw-r--r--doc/openocd.texi14
-rw-r--r--src/helper/startup.tcl9
-rw-r--r--src/target/armv4_5.c18
-rw-r--r--tcl/board/mini2440.cfg2
-rw-r--r--tcl/target/lpc1768.cfg2
-rw-r--r--tcl/target/lpc2148.cfg2
-rw-r--r--tcl/target/lpc2378.cfg2
-rw-r--r--tcl/target/lpc2478.cfg2
9 files changed, 31 insertions, 22 deletions
diff --git a/NEWS b/NEWS
index 7387d705..1a024e45 100644
--- a/NEWS
+++ b/NEWS
@@ -8,6 +8,8 @@ JTAG Layer:
Boundary Scan:
Target Layer:
+ ARM
+ - renamed "armv4_5" command prefix as "arm"
ARM11
- Preliminary ETM and ETB hookup
- accelerated "flash erase_check"
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 81409acc..092de7d3 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -5515,16 +5515,14 @@ Reports whether the capture clock is locked or not.
@end deffn
-@section ARMv4 and ARMv5 Architecture
-@cindex ARMv4
-@cindex ARMv5
+@section Generic ARM
+@cindex ARM
-These commands are specific to ARM architecture v4 and v5,
-including all ARM7 or ARM9 systems and Intel XScale.
+These commands should be available on all ARM processors.
They are available in addition to other core-specific
commands that may be available.
-@deffn Command {armv4_5 core_state} [@option{arm}|@option{thumb}]
+@deffn Command {arm core_state} [@option{arm}|@option{thumb}]
Displays the core_state, optionally changing it to process
either @option{arm} or @option{thumb} instructions.
The target may later be resumed in the currently set core_state.
@@ -5532,7 +5530,7 @@ The target may later be resumed in the currently set core_state.
that is not currently supported in OpenOCD.)
@end deffn
-@deffn Command {armv4_5 disassemble} address [count [@option{thumb}]]
+@deffn Command {arm disassemble} address [count [@option{thumb}]]
@cindex disassemble
Disassembles @var{count} instructions starting at @var{address}.
If @var{count} is not specified, a single instruction is disassembled.
@@ -5543,7 +5541,7 @@ else ARM (32-bit) instructions are used.
those instructions are not currently understood by OpenOCD.)
@end deffn
-@deffn Command {armv4_5 reg}
+@deffn Command {arm reg}
Display a table of all banked core registers, fetching the current value from every
core mode if necessary. OpenOCD versions before rev. 60 didn't fetch the current
register value.
diff --git a/src/helper/startup.tcl b/src/helper/startup.tcl
index 73c4cf19..096f03a8 100644
--- a/src/helper/startup.tcl
+++ b/src/helper/startup.tcl
@@ -142,6 +142,15 @@ proc ocd_gdb_restart {target_id} {
reset halt
}
+#########
+
+# Temporary migration aid. May be removed starting in January 2011.
+proc armv4_5 params {
+ echo "DEPRECATED! use 'arm $params' not 'armv4_5 $params'"
+ arm $params
+}
+
+#########
# This reset logic may be overridden by board/target/... scripts as needed
# to provide a reset that, if possible, is close to a power-up reset.
diff --git a/src/target/armv4_5.c b/src/target/armv4_5.c
index e112e7b1..7c4861ff 100644
--- a/src/target/armv4_5.c
+++ b/src/target/armv4_5.c
@@ -363,10 +363,10 @@ COMMAND_HANDLER(handle_armv4_5_reg_command)
struct target *target = get_current_target(cmd_ctx);
struct armv4_5_common_s *armv4_5 = target_to_armv4_5(target);
- if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
+ if (!is_arm(armv4_5))
{
- command_print(cmd_ctx, "current target isn't an ARMV4/5 target");
- return ERROR_OK;
+ command_print(cmd_ctx, "current target isn't an ARM");
+ return ERROR_FAIL;
}
if (target->state != TARGET_HALTED)
@@ -412,10 +412,10 @@ COMMAND_HANDLER(handle_armv4_5_core_state_command)
struct target *target = get_current_target(cmd_ctx);
struct armv4_5_common_s *armv4_5 = target_to_armv4_5(target);
- if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
+ if (!is_arm(armv4_5))
{
- command_print(cmd_ctx, "current target isn't an ARMV4/5 target");
- return ERROR_OK;
+ command_print(cmd_ctx, "current target isn't an ARM");
+ return ERROR_FAIL;
}
if (argc > 0)
@@ -471,7 +471,7 @@ COMMAND_HANDLER(handle_armv4_5_disassemble_command)
default:
usage:
command_print(cmd_ctx,
- "usage: armv4_5 disassemble <address> [<count> ['thumb']]");
+ "usage: arm disassemble <address> [<count> ['thumb']]");
count = 0;
retval = ERROR_FAIL;
}
@@ -510,9 +510,9 @@ int armv4_5_register_commands(struct command_context *cmd_ctx)
{
struct command *armv4_5_cmd;
- armv4_5_cmd = register_command(cmd_ctx, NULL, "armv4_5",
+ armv4_5_cmd = register_command(cmd_ctx, NULL, "arm",
NULL, COMMAND_ANY,
- "armv4/5 specific commands");
+ "generic ARM commands");
register_command(cmd_ctx, armv4_5_cmd, "reg",
handle_armv4_5_reg_command, COMMAND_EXEC,
diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg
index d17b1076..0f7ebf8a 100644
--- a/tcl/board/mini2440.cfg
+++ b/tcl/board/mini2440.cfg
@@ -292,7 +292,7 @@ proc load_uboot { } {
proc s {} {
step
reg
- armv4_5 disassemble 0x33F80068 0x10
+ arm disassemble 0x33F80068 0x10
}
proc help_2440 {} {
diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg
index 9f6bcffc..0b07d51f 100644
--- a/tcl/target/lpc1768.cfg
+++ b/tcl/target/lpc1768.cfg
@@ -35,7 +35,7 @@ $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size 0x8000 -work-a
$_TARGETNAME configure -event reset-init {
# Force target into ARM state
- armv4_5 core_state arm
+ arm core_state arm
#do not remap 0x0000-0x0020 to anything but the flash
# mwb 0xE01FC040 0x01
mwb 0xE000ED08 0x00
diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg
index ce672c88..1f833e72 100644
--- a/tcl/target/lpc2148.cfg
+++ b/tcl/target/lpc2148.cfg
@@ -39,7 +39,7 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-a
$_TARGETNAME configure -event reset-init {
# Force target into ARM state
- armv4_5 core_state arm
+ arm core_state arm
# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
# "User Flash Mode" where interrupt vectors are _not_ remapped,
diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg
index 7f716f3d..aa3fad26 100644
--- a/tcl/target/lpc2378.cfg
+++ b/tcl/target/lpc2378.cfg
@@ -35,7 +35,7 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x8000 -work-a
$_TARGETNAME configure -event reset-init {
# Force target into ARM state
- armv4_5 core_state arm
+ arm core_state arm
#do not remap 0x0000-0x0020 to anything but the flash
mwb 0xE01FC040 0x01
}
diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg
index e78afa1a..b0af4c02 100644
--- a/tcl/target/lpc2478.cfg
+++ b/tcl/target/lpc2478.cfg
@@ -35,7 +35,7 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x10000 -work-
$_TARGETNAME configure -event reset-init {
# Force target into ARM state
- armv4_5 core_state arm
+ arm core_state arm
# Do not remap 0x0000-0x0020 to anything but the Flash
mwb 0xE01FC040 0x01
}
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-22 21:32:58 +0000