summaryrefslogtreecommitdiff
path: root/src/flash/stm32x.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/flash/stm32x.c')
-rw-r--r--src/flash/stm32x.c28
1 files changed, 14 insertions, 14 deletions
diff --git a/src/flash/stm32x.c b/src/flash/stm32x.c
index ebb55f83..7e26ece3 100644
--- a/src/flash/stm32x.c
+++ b/src/flash/stm32x.c
@@ -92,7 +92,7 @@ int stm32x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char
if (argc < 6)
{
- WARNING("incomplete flash_bank stm32x configuration");
+ LOG_WARNING("incomplete flash_bank stm32x configuration");
return ERROR_FLASH_BANK_INVALID;
}
@@ -122,7 +122,7 @@ u32 stm32x_wait_status_busy(flash_bank_t *bank, int timeout)
/* wait for busy to clear */
while (((status = stm32x_get_flash_status(bank)) & FLASH_BSY) && (timeout-- > 0))
{
- DEBUG("status: 0x%x", status);
+ LOG_DEBUG("status: 0x%x", status);
usleep(1000);
}
@@ -144,7 +144,7 @@ int stm32x_read_options(struct flash_bank_s *bank)
stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5;
if (optiondata & (1 << OPT_READOUT))
- INFO("Device Security Bit Set");
+ LOG_INFO("Device Security Bit Set");
/* each bit refers to a 4bank protection */
target_read_u32(target, STM32_FLASH_WRPR, &optiondata);
@@ -403,7 +403,7 @@ int stm32x_protect(struct flash_bank_s *bank, int set, int first, int last)
if ((first && (first % 4)) || ((last + 1) && (last + 1) % 4))
{
- WARNING("sector start/end incorrect - stm32 has 4K sector protection");
+ LOG_WARNING("sector start/end incorrect - stm32 has 4K sector protection");
return ERROR_FLASH_SECTOR_INVALID;
}
@@ -473,7 +473,7 @@ int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 co
/* flash write code */
if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code), &stm32x_info->write_algorithm) != ERROR_OK)
{
- WARNING("no working area available, can't do block memory writes");
+ LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
@@ -489,7 +489,7 @@ int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 co
if (stm32x_info->write_algorithm)
target_free_working_area(target, stm32x_info->write_algorithm);
- WARNING("no large enough working area available, can't do block memory writes");
+ LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
};
@@ -516,7 +516,7 @@ int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 co
if ((retval = target->type->run_algorithm(target, 0, NULL, 4, reg_params, stm32x_info->write_algorithm->address, \
stm32x_info->write_algorithm->address + (sizeof(stm32x_flash_write_code) - 10), 10000, &armv7m_info)) != ERROR_OK)
{
- ERROR("error executing stm32x flash write algorithm");
+ LOG_ERROR("error executing stm32x flash write algorithm");
break;
}
@@ -559,7 +559,7 @@ int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
if (offset & 0x1)
{
- WARNING("offset 0x%x breaks required 2-byte alignment", offset);
+ LOG_WARNING("offset 0x%x breaks required 2-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
@@ -577,11 +577,11 @@ int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
{
/* if block write failed (no sufficient working area),
* we use normal (slow) single dword accesses */
- WARNING("couldn't use block writes, falling back to single memory accesses");
+ LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
}
else if (retval == ERROR_FLASH_OPERATION_FAILED)
{
- ERROR("flash writing failed with error code: 0x%x", retval);
+ LOG_ERROR("flash writing failed with error code: 0x%x", retval);
return ERROR_FLASH_OPERATION_FAILED;
}
}
@@ -655,11 +655,11 @@ int stm32x_probe(struct flash_bank_s *bank)
/* read stm32 device id register */
target_read_u32(target, 0xE0042000, &device_id);
- INFO( "device id = 0x%08x", device_id );
+ LOG_INFO( "device id = 0x%08x", device_id );
if (!(device_id & 0x410))
{
- WARNING( "Cannot identify target as a STM32 family." );
+ LOG_WARNING( "Cannot identify target as a STM32 family." );
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -670,11 +670,11 @@ int stm32x_probe(struct flash_bank_s *bank)
if ((device_id >> 16) == 0 )
{
/* number of sectors incorrect on revA */
- WARNING( "STM32 Rev A Silicon detected, probe inaccurate - assuming 128k flash" );
+ LOG_WARNING( "STM32 Rev A Silicon detected, probe inaccurate - assuming 128k flash" );
num_sectors = 128;
}
- INFO( "flash size = %dkbytes", num_sectors );
+ LOG_INFO( "flash size = %dkbytes", num_sectors );
bank->base = 0x08000000;
bank->size = num_sectors * 1024;