diff options
Diffstat (limited to 'src/target/target/str9comstick.cfg')
-rw-r--r-- | src/target/target/str9comstick.cfg | 35 |
1 files changed, 29 insertions, 6 deletions
diff --git a/src/target/target/str9comstick.cfg b/src/target/target/str9comstick.cfg index b9b5fc75..0696c121 100644 --- a/src/target/target/str9comstick.cfg +++ b/src/target/target/str9comstick.cfg @@ -5,15 +5,38 @@ jtag_khz 3000 jtag_nsrst_delay 100 jtag_ntrst_delay 100 -#use combined on interfaces or targets that can’t set TRST/SRST separately +#use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) -jtag_device 8 0x1 0x1 0xfe -jtag_device 4 0x1 0xf 0xe -jtag_device 5 0x1 0x1 0x1e -target create target0 arm966e -endian little -chain-position 1 -variant arm966e -[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 + + +if { [info exists FLASHTAPID ] } { + set _FLASHTAPID $FLASHTAPID +} else { + set _FLASHTAPID 0xFFFFFFFF +} +jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x25966041 +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xf -irmask 0xe -expected-id $_CPUTAPID + + +if { [info exists BSTAPID ] } { + set _BSTAPID $BSTAPID +} else { + set _BSTAPID 0xFFFFFFFF +} +jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank str9x 0x00000000 0x00080000 0 0 0 |