summaryrefslogtreecommitdiff
path: root/src/tcl/target/lpc2148.cfg
diff options
context:
space:
mode:
Diffstat (limited to 'src/tcl/target/lpc2148.cfg')
-rw-r--r--src/tcl/target/lpc2148.cfg56
1 files changed, 0 insertions, 56 deletions
diff --git a/src/tcl/target/lpc2148.cfg b/src/tcl/target/lpc2148.cfg
deleted file mode 100644
index d367a8f5..00000000
--- a/src/tcl/target/lpc2148.cfg
+++ /dev/null
@@ -1,56 +0,0 @@
-# Use RCLK. If RCLK is not available fall back to 500kHz.
-#
-# Depending on cabling you might be able to eek this up to 2000kHz.
-jtag_rclk 500
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME lpc2148
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- set _CPUTAPID 0x4f1f0f0f
-}
-
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate
-# JTAG, power-on reset is not enough, i.e. you need to perform a
-# reset before being able to talk to the LPC2148, attach is not possible.
-
-reset_config trst_and_srst srst_pulls_trst
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
-
-$_TARGETNAME configure -event reset-init {
- # Force target into ARM state.
- soft_reset_halt
-
- # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
- # "User Flash Mode" where interrupt vectors are _not_ remapped,
- # and reside in flash instead).
- #
- # See section 7.1 on page 32 ("Memory Mapping control register") in
- # "UM10139: Volume 1: LPC214x User Manual", Rev. 02 -- 25 July 2006.
- # http://www.standardics.nxp.com/support/documents/microcontrollers/pdf/user.manual.lpc2141.lpc2142.lpc2144.lpc2146.lpc2148.pdf
- mwb 0xE01FC040 0x01
-}
-
-# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum]
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum