1 files changed, 0 insertions, 66 deletions
diff --git a/src/tcl/target/ti_dm6446.cfg b/src/tcl/target/ti_dm6446.cfg
deleted file mode 100644
index 68a7c207..00000000
--- a/src/tcl/target/ti_dm6446.cfg
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# Texas Instruments DaVinci family:  TMS320DM6446
-#
-if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
-} else {
-   set  _CHIPNAME dm6446
-}
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
-
-#
-# For now, expect EMU0/EMU1 jumpered LOW (not TI's default) so ARM and ETB
-# are enabled without making ICEpick route ARM and ETB into the JTAG chain.
-#
-# Also note:  when running without RTCK before the PLLs are set up, you
-# may need to slow the JTAG clock down quite a lot (under 2 MHz).
-#
-
-# Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer
-if { [info exists ETB_TAPID ] } {
-   set _ETB_TAPID $ETB_TAPID
-} else {
-   set _ETB_TAPID 0x2b900f0f
-}
-jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_ETB_TAPID
-
-# Subsidiary TAP: ARM926ejs with scan chains for ARM Debug, EmbeddedICE-RT, ETM.
-if { [info exists CPU_TAPID ] } {
-   set _CPU_TAPID $CPU_TAPID
-} else {
-   set _CPU_TAPID 0x07926001
-}
-jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPU_TAPID
-
-# Subsidiary TAP: C64x+ DSP ... NOT CURRENTLY INCLUDED, must add via ICEpick.
-# Documentation for DSP JTAG interfaces evidently needs NDAs.
-
-# Primary TAP: ICEpick (JTAG route controller) and boundary scan
-if { [info exists JRC_TAPID ] } {
-   set _JRC_TAPID $JRC_TAPID
-} else {
-   set _JRC_TAPID 0x0b70002f
-}
-jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID
-
-# GDB target:  the ARM, using SRAM1 for scratch.  SRAM0 (also 8K)
-# and the ETB memory (4K) are other options, while trace is unused.
-set _TARGETNAME $_CHIPNAME.arm
-
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x0000a000 -work-area-size 0x2000 -work-area-backup 0
-
-arm7_9 dbgrq enable
-arm7_9 fast_memory_access enable
-arm7_9 dcc_downloads enable
-
-# trace setup
-# FIXME we ought to be able to say "... config $_TARGETNAME ..."
-# (not "config 0") facilitating additional targets (e.g. other chips)
-etm config 0 16 normal full etb
-etb config 0 $_CHIPNAME.etb
-