summaryrefslogtreecommitdiff
path: root/tcl/board/rsc-w910.cfg
diff options
context:
space:
mode:
Diffstat (limited to 'tcl/board/rsc-w910.cfg')
-rw-r--r--tcl/board/rsc-w910.cfg62
1 files changed, 62 insertions, 0 deletions
diff --git a/tcl/board/rsc-w910.cfg b/tcl/board/rsc-w910.cfg
new file mode 100644
index 00000000..f7095a68
--- /dev/null
+++ b/tcl/board/rsc-w910.cfg
@@ -0,0 +1,62 @@
+# Avalue RSC-W8910 sbc
+# http://www.avalue.com.tw/products/RSC-W910.cfm
+# 2MB NOR Flash
+# 64MB SDRAM
+# 128MB NAND Flash
+
+# Based on Nuvoton nuc910
+source [find target/nuc910.cfg]
+
+#
+# reset only behaves correctly if we use srst_pulls_trst
+#
+reset_config trst_and_srst srst_pulls_trst
+
+adapter_khz 1000
+adapter_nsrst_delay 100
+jtag_ntrst_delay 100
+
+$_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x04000000 -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x20000000 0x00200000 2 2 $_TARGETNAME
+
+#
+# Target events
+#
+
+$_TARGETNAME configure -event reset-start {adapter_khz 1000}
+
+$_TARGETNAME configure -event reset-init {
+ # switch on PLL for 200MHz operation
+ # running from 15MHz input clock
+
+ mww 0xB0000200 0x45180bb1 # CLKEN
+ mww 0xB0000204 0x00000f3c # CLKSEL
+ mww 0xB0000208 0x05007000 # CLKDIV
+ mww 0xB000020C 0x00004f24 # PLLCON0
+ mww 0xB0000210 0x00002b63 # PLLCON1
+ sleep 10
+
+ # we are now running @ 200MHz
+ # enable all openocd speed tweaks
+
+ arm7_9 dcc_downloads enable
+ arm7_9 fast_memory_access enable
+ adapter_khz 15000
+
+ # map nor flash to 0x20000000
+ # map sdram to 0x00000000
+
+ mww 0xb0001000 0x000530c1 # EBICON
+ mww 0xb0001004 0x40030084 # ROMCON
+ mww 0xb0001008 0x000010ee # SDCONF0
+ mww 0xb000100C 0x00000000 # SDCONF1
+ mww 0xb0001010 0x0000015b # SDTIME0
+ mww 0xb0001014 0x0000015b # SDTIME1
+ mww 0xb0001018 0x00000000 # EXT0CON
+ mww 0xb000101C 0x00000000 # EXT1CON
+ mww 0xb0001020 0x00000000 # EXT2CON
+ mww 0xb0001024 0x00000000 # EXT3CON
+ mww 0xb000102c 0x00ff0048 # CKSKEW
+}