diff options
Diffstat (limited to 'tcl/target/stm32.cfg')
| -rw-r--r-- | tcl/target/stm32.cfg | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg new file mode 100644 index 00000000..2fe17850 --- /dev/null +++ b/tcl/target/stm32.cfg @@ -0,0 +1,58 @@ +# script for stm32 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME stm32 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# jtag speed +jtag_khz 500 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst + +#jtag scan chain +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # See STM Document RM0008 + # Section 26.6.3 + set _CPUTAPID 0x3ba00477 +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +if { [info exists BSTAPID ] } { + set _BSTAPID $BSTAPID +} else { + # See STM Document RM0008 + # Section 26.6.2 + # Low density devices, Rev A + set _BSTAPID1 0x06412041 + # Medium density devices, Rev A + set _BSTAPID2 0x06410041 + # Medium density devices, Rev B and Rev Z + set _BSTAPID3 0x16410041 + # High density devices, Rev A + set _BSTAPID4 0x06414041 +} +jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 -expected-id $_BSTAPID4 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 + +flash bank stm32x 0 0 0 0 0 + +# For more information about the configuration files, take a look at: +# openocd.texi |