diff options
Diffstat (limited to 'tcl/target/ti_dm6446.cfg')
| -rw-r--r-- | tcl/target/ti_dm6446.cfg | 49 |
1 files changed, 31 insertions, 18 deletions
diff --git a/tcl/target/ti_dm6446.cfg b/tcl/target/ti_dm6446.cfg index 68a7c207..4ab342a0 100644 --- a/tcl/target/ti_dm6446.cfg +++ b/tcl/target/ti_dm6446.cfg @@ -6,19 +6,28 @@ if { [info exists CHIPNAME] } { } else { set _CHIPNAME dm6446 } -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} # # For now, expect EMU0/EMU1 jumpered LOW (not TI's default) so ARM and ETB # are enabled without making ICEpick route ARM and ETB into the JTAG chain. +# Override by setting EMU01 to "-disable". # # Also note: when running without RTCK before the PLLs are set up, you # may need to slow the JTAG clock down quite a lot (under 2 MHz). # +source [find target/icepick.cfg] +set EMU01 "" +#set EMU01 "-disable" + +# Subsidiary TAP: unknown ... must enable via ICEpick +jtag newtap $_CHIPNAME unknown -irlen 8 -ircapture 0xff -irmask 0xff -disable +jtag configure $_CHIPNAME.unknown -event tap-enable \ + "icepick_c_tapenable $_CHIPNAME.jrc 3" + +# Subsidiary TAP: C64x+ DSP ... must enable via ICEpick +jtag newtap $_CHIPNAME dsp -irlen 38 -ircapture 0x25 -irmask 0x3f -disable +jtag configure $_CHIPNAME.dsp -event tap-enable \ + "icepick_c_tapenable $_CHIPNAME.jrc 2" # Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer if { [info exists ETB_TAPID ] } { @@ -26,7 +35,10 @@ if { [info exists ETB_TAPID ] } { } else { set _ETB_TAPID 0x2b900f0f } -jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_ETB_TAPID +jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \ + -expected-id $_ETB_TAPID $EMU01 +jtag configure $_CHIPNAME.etb -event tap-enable \ + "icepick_c_tapenable $_CHIPNAME.jrc 1" # Subsidiary TAP: ARM926ejs with scan chains for ARM Debug, EmbeddedICE-RT, ETM. if { [info exists CPU_TAPID ] } { @@ -34,33 +46,34 @@ if { [info exists CPU_TAPID ] } { } else { set _CPU_TAPID 0x07926001 } -jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPU_TAPID - -# Subsidiary TAP: C64x+ DSP ... NOT CURRENTLY INCLUDED, must add via ICEpick. -# Documentation for DSP JTAG interfaces evidently needs NDAs. +jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \ + -expected-id $_CPU_TAPID $EMU01 +jtag configure $_CHIPNAME.arm -event tap-enable \ + "icepick_c_tapenable $_CHIPNAME.jrc 0" -# Primary TAP: ICEpick (JTAG route controller) and boundary scan +# Primary TAP: ICEpick-C (JTAG route controller) and boundary scan if { [info exists JRC_TAPID ] } { set _JRC_TAPID $JRC_TAPID } else { set _JRC_TAPID 0x0b70002f } -jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID +jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ + -expected-id $_JRC_TAPID # GDB target: the ARM, using SRAM1 for scratch. SRAM0 (also 8K) # and the ETB memory (4K) are other options, while trace is unused. +# Little-endian; use the OpenOCD default. set _TARGETNAME $_CHIPNAME.arm -target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x0000a000 -work-area-size 0x2000 -work-area-backup 0 +target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME +$_TARGETNAME configure -work-area-phys 0x0000a000 -work-area-size 0x2000 arm7_9 dbgrq enable arm7_9 fast_memory_access enable arm7_9 dcc_downloads enable # trace setup -# FIXME we ought to be able to say "... config $_TARGETNAME ..." -# (not "config 0") facilitating additional targets (e.g. other chips) -etm config 0 16 normal full etb -etb config 0 $_CHIPNAME.etb +etm config $_TARGETNAME 16 normal full etb +etb config $_TARGETNAME $_CHIPNAME.etb +# vim:syntax tcl |