summaryrefslogtreecommitdiff
path: root/tcl/target
diff options
context:
space:
mode:
Diffstat (limited to 'tcl/target')
-rw-r--r--tcl/target/lpc2148.cfg87
1 files changed, 41 insertions, 46 deletions
diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg
index 8062cdde..7665ee75 100644
--- a/tcl/target/lpc2148.cfg
+++ b/tcl/target/lpc2148.cfg
@@ -1,50 +1,45 @@
-# Use RCLK. If RCLK is not available fall back to 500kHz.
-#
-# Depending on cabling you might be able to eek this up to 2000kHz.
-jtag_rclk 500
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME lpc2148
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- set _CPUTAPID 0x4f1f0f0f
+# Proc that can be invoked to create a special version of
+# the LPC2148
+proc setup_lpc2148 {chipname tapids} {
+ # Use RCLK. If RCLK is not available fall back to 500kHz.
+ #
+ # Depending on cabling you might be able to eek this up to 2000kHz.
+ jtag_rclk 500
+
+ adapter_nsrst_delay 200
+ jtag_ntrst_delay 200
+
+ # NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate
+ # JTAG, power-on reset is not enough, i.e. you need to perform a
+ # reset before being able to talk to the LPC2148, attach is not possible.
+ reset_config trst_and_srst
+
+ eval "jtag newtap $chipname cpu -irlen 4 -ircapture 0x1 -irmask 0xf $tapids"
+
+ target create $chipname.cpu arm7tdmi -chain-position $chipname.cpu
+
+ $chipname.cpu configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
+
+ $chipname.cpu configure -event reset-init {
+ # Force target into ARM state
+ arm core_state arm
+
+ # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
+ # "User Flash Mode" where interrupt vectors are _not_ remapped,
+ # and reside in flash instead).
+ #
+ # See section 7.1 on page 32 ("Memory Mapping control register") in
+ # "UM10139: Volume 1: LPC214x User Manual", Rev. 02 -- 25 July 2006.
+ # http://www.standardics.nxp.com/support/documents/microcontrollers/pdf/user.manual.lpc2141.lpc2142.lpc2144.lpc2146.lpc2148.pdf
+ mwb 0xE01FC040 0x01
+ }
+
+ # flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
+ flash bank $chipname.flash lpc2000 0x0 0x7d000 0 0 $chipname.cpu lpc2000_v2 14765 calc_checksum
}
-adapter_nsrst_delay 200
-jtag_ntrst_delay 200
-
-# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate
-# JTAG, power-on reset is not enough, i.e. you need to perform a
-# reset before being able to talk to the LPC2148, attach is not possible.
-
-reset_config trst_and_srst
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
-
-$_TARGETNAME configure -event reset-init {
- # Force target into ARM state
- arm core_state arm
-
- # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
- # "User Flash Mode" where interrupt vectors are _not_ remapped,
- # and reside in flash instead).
- #
- # See section 7.1 on page 32 ("Memory Mapping control register") in
- # "UM10139: Volume 1: LPC214x User Manual", Rev. 02 -- 25 July 2006.
- # http://www.standardics.nxp.com/support/documents/microcontrollers/pdf/user.manual.lpc2141.lpc2142.lpc2144.lpc2146.lpc2148.pdf
- mwb 0xE01FC040 0x01
+# Default settings
+proc init_targets {} {
+ setup_lpc2148 lpc2148 "-expected-id 0x3f0f0f0f -expected-id 0x4f1f0f0f"
}
-
-# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 $_TARGETNAME lpc2000_v2 14765 calc_checksum