diff options
Diffstat (limited to 'tcl')
-rw-r--r-- | tcl/target/at91r40008.cfg | 2 | ||||
-rw-r--r-- | tcl/target/epc9301.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc1768.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2103.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2124.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2129.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2148.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2294.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2378.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2478.cfg | 2 | ||||
-rw-r--r-- | tcl/target/smdk6410.cfg | 2 | ||||
-rw-r--r-- | tcl/target/stm32.cfg | 2 | ||||
-rw-r--r-- | tcl/target/xba_revA3.cfg | 2 |
13 files changed, 13 insertions, 13 deletions
diff --git a/tcl/target/at91r40008.cfg b/tcl/target/at91r40008.cfg index fe755b4d..eb6cabaa 100644 --- a/tcl/target/at91r40008.cfg +++ b/tcl/target/at91r40008.cfg @@ -45,7 +45,7 @@ $_TARGETNAME configure -event gdb-flash-erase-start { $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0 -flash bank cfi 0x10000000 0x400000 2 2 0 +flash bank cfi 0x10000000 0x400000 2 2 $_TARGETNAME # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg index f3fe7eb1..2b4155fb 100644 --- a/tcl/target/epc9301.cfg +++ b/tcl/target/epc9301.cfg @@ -28,4 +28,4 @@ target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME #flash configuration #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...] -flash bank cfi 0x60000000 0x1000000 2 2 0 +flash bank cfi 0x60000000 0x1000000 2 2 $_TARGETNAME diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg index fbf7117c..63ec1bb3 100644 --- a/tcl/target/lpc1768.cfg +++ b/tcl/target/lpc1768.cfg @@ -44,7 +44,7 @@ $_TARGETNAME configure -event reset-init { # LPC1768 has 512kB of user-available FLASH (bootloader is located in separate dedicated region). # flash bank lpc1700 <base> <size> 0 0 <target#> <variant> <cclk> [calc_checksum] -flash bank lpc2000 0x0 0x80000 0 0 0 lpc1700 12000 calc_checksum +flash bank lpc2000 0x0 0x80000 0 0 $_TARGETNAME lpc1700 12000 calc_checksum # 4MHz / 6 = 666kHz, so use 500 jtag_khz 500 diff --git a/tcl/target/lpc2103.cfg b/tcl/target/lpc2103.cfg index 899ca237..1a880761 100644 --- a/tcl/target/lpc2103.cfg +++ b/tcl/target/lpc2103.cfg @@ -35,4 +35,4 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s # 32kB of internal Flash, core clocked with 12MHz crystal # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum] -flash bank lpc2000 0x0 0x8000 0 0 0 lpc2000_v2 12000 calc_checksum +flash bank lpc2000 0x0 0x8000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg index 9430c1b0..61d411b5 100644 --- a/tcl/target/lpc2124.cfg +++ b/tcl/target/lpc2124.cfg @@ -39,4 +39,4 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s #flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum +flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg index daaa8d56..5438fc3c 100644 --- a/tcl/target/lpc2129.cfg +++ b/tcl/target/lpc2129.cfg @@ -38,4 +38,4 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum +flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg index e70947fe..b5023437 100644 --- a/tcl/target/lpc2148.cfg +++ b/tcl/target/lpc2148.cfg @@ -52,4 +52,4 @@ $_TARGETNAME configure -event reset-init { } # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum] -flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum +flash bank lpc2000 0x0 0x7d000 0 0 $_TARGETNAME lpc2000_v2 14765 calc_checksum diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg index 399b11df..08fbf581 100644 --- a/tcl/target/lpc2294.cfg +++ b/tcl/target/lpc2294.cfg @@ -32,7 +32,7 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s #flash configuration #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> -flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum +flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg index d34ffae6..34b9963f 100644 --- a/tcl/target/lpc2378.cfg +++ b/tcl/target/lpc2378.cfg @@ -43,7 +43,7 @@ $_TARGETNAME configure -event reset-init { # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader. # After reset the chip uses its internal 4MHz RC oscillator #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> -flash bank lpc2000 0x0 0x0007D000 0 0 0 lpc2000_v2 4000 calc_checksum +flash bank lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum # 4MHz / 6 = 666kHz, so use 500 jtag_khz 500 diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg index 1d2058b0..bf33ae0e 100644 --- a/tcl/target/lpc2478.cfg +++ b/tcl/target/lpc2478.cfg @@ -43,7 +43,7 @@ $_TARGETNAME configure -event reset-init { # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader. # After reset the chip uses its internal 4MHz RC oscillator. # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum] -flash bank lpc2000 0x0 0x7D000 0 0 0 lpc2000_v2 12000 calc_checksum +flash bank lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum # Try to use RCLK, if RCLK is not available use "normal" mode. 4MHz / 6 = 666kHz, so use 500. jtag_rclk 500 diff --git a/tcl/target/smdk6410.cfg b/tcl/target/smdk6410.cfg index 6ce07cae..7f15f8b8 100644 --- a/tcl/target/smdk6410.cfg +++ b/tcl/target/smdk6410.cfg @@ -5,4 +5,4 @@ source [find target/samsung_s3c6410.cfg] -flash bank cfi 0x00000000 0x00100000 2 2 0 jedec_probe
\ No newline at end of file +flash bank cfi 0x00000000 0x00100000 2 2 $_TARGETNAME jedec_probe diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg index a37e7334..b5a86527 100644 --- a/tcl/target/stm32.cfg +++ b/tcl/target/stm32.cfg @@ -62,7 +62,7 @@ target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNA $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 -flash bank stm32x 0 0 0 0 0 +flash bank stm32x 0 0 0 0 $_TARGETNAME # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg index 0595fa16..e1c88705 100644 --- a/tcl/target/xba_revA3.cfg +++ b/tcl/target/xba_revA3.cfg @@ -79,7 +79,7 @@ $_TARGETNAME configure -event reset-init { $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 -flash bank cfi 0x50000000 0x400000 2 2 0 +flash bank cfi 0x50000000 0x400000 2 2 $_TARGETNAME init reset init |