diff options
Diffstat (limited to 'testing/build.test2/local.uses')
| -rwxr-xr-x | testing/build.test2/local.uses | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/testing/build.test2/local.uses b/testing/build.test2/local.uses new file mode 100755 index 00000000..edde31b0 --- /dev/null +++ b/testing/build.test2/local.uses @@ -0,0 +1,161 @@ +# -*- mode: makefile -*- +#======================================== +# DO NOT REMOVE THE LINE BELOW +HERE := $(shell pwd) +# DO NOT REMOVE THE LINE ABOVE +#======================================== + +# These are common CYGWIN build settings. +# Comment out things you do not want. +# Or unComment things you want. + +# PCs always have printer ports... +X86_PRINTER_PORT ?= y + +# Chose *ONE* of these three solutions. +#FTD2232_DRIVER = none +FT2232_DRIVER = ftd2xx +#FT2232_DRIVER = libftdi + +# Do you have "libusb" installed? +ifeq (x"${FT2232_DRIVER}",x"libftdi") +# With LIBFTDI... LIBUSB is manditory. +USE_LIBUSB = y +endif + +# By default... we assume libusb not present. +USE_LIBUSB ?= n + +#======================================== +# DO NOT EDIT SETTINGS BELOW THIS LINE +#======================================== + + + +#======================================== +# House keeping... + +# Solve problems on systems with DASH.. Grrr... +SHELL=/bin/bash +export SHELL + +VIRGINS ?= ${HERE}/virgins +INSTALL_DIR ?= $(HERE)/install +PREFIX ?= ${INSTALL_DIR} + +# Determine the build platform. +BUILD_SYSNAME_Linux =linux +BUILD_SYSNAME_linux =linux +BUILD_SYSNAME_CYGWIN_NT =cygwin +BUILD_SYSNAME_MINGW32_NT =mingw32 +BUILD_SYSNAME_Darwin =darwin +BUILD_SYSNAME_darwin =darwin +BUILD_SYSNAME :=$(BUILD_SYSNAME_$(shell uname --sysname | cut -d'-' -f1)) + +# And machine (ie: i686, x86_64, or what ever) +BUILD_MACHINE :=$(BUILD_SYSNAME).$(shell uname -m) + + +#======================================== +# + +FTD2XX_LINUX_VERSION=0.4.16 +FTD2XX_LINUX_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION} +FTD2XX_LINUX_64_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64 + + +# Wiggler type interfaces are here. +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-gw16012 +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-amtjtagaccel + + +# FTD2XX only supports these +OPENOCD_CONFIG_OPTIONS_ft2232_none = +OPENOCD_CONFIG_OPTIONS_ft2232_ftd2xx = --enable-ft2232_ftd2xx --enable-presto_ftd2xx --with-ftd2xx-win32-zipdir=${FTD2XX_WIN32_DIR} +OPENOCD_CONFIG_OPTIONS_ft2232_libftdi = --enable-ft2232_libftdi --enable-presto_libftdi + +# LIBUSB - adds support for these. +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-jlink +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-rlink +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-vsllink +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog + +#======================================== +# EXPLICITY NOT SUPPORTED INTERFACES +# +# zy1000.c +# This is a standalone hardware box +# it is *NOT* a cygwin thing. +# +# at91rm9200.c +# This is a uC/Linux (or linux) that +# runs uC/Linux and uses the gpio pins +# to bit-bang JTAG stuff. +# +# ep93xx.c +# Just like at91rm9200 - different chip. + +#======================================== +# Build OPENOCD config options... +# Always enable "dummy" +OPENOCD_CONFIG_OPTIONS += --enable-dummy +# +# Today: Cannot enable 'oocd_trace' on cygwin. +# it assumes/uses termios functions like +# cfmakeraw() which do not exist on cygwin. +# +#OPENOCD_CONFIG_OPTIONS += --enable-oocd-trace +# +# Add printer options.. +OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_printer_${X86_PRINTER_PORT}} + +# Add the FTD2232 based options. +OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_ft2232_${FT2232_DRIVER}} + +# Add LIBUSB based options. +OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_libusb_${USE_LIBUSB}} + + +#======================================== +# WARNING... the file on the ftdi chip site has a SPACE in the filename GRRR!!! +# We fix that with the "-O" option to wget. +FTD2XX_WIN32_VERSION=2.04.14 +FTD2XX_WIN32_DIR = ${HERE}/ftd2xx.win32 + +FTD2XX_ZIPFILE_LOCAL=${VIRGINS}/cdm.${FTD2XX_WIN32_VERSION}.zip +# Damn thing has a space in the F-ing filename! +FTD2XX_ZIPFILE_URL ="http://www.ftdichip.com/Drivers/CDM/CDM ${FTD2XX_WIN32_VERSION}.zip" + + +#======================================== +# LIBCONFUSE - used by LIBFTDI.. +LIBCONFUSE_VERSION=2.5 +LIBCONFUSE_TARFILE_LOCAL=${VIRGINS}/confuse-${LIBCONFUSE_VERSION}.tar.gz +LIBCONFUSE_TARFILE_URL =http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/confuse-${LIBCONFUSE_VERSION}.tar.gz + +LIBCONFUSE_SRC_DIR =${HERE}/confuse-${LIBCONFUSE_VERSION} +LIBCONFUSE_BUILD_DIR =${HERE}/confuse-build + + +#======================================== +# LIBFTDI... (which uses libusb, and libconfuse) +LIBFTDI_VERSION=0.14 +LIBFTDI_TARFILE_LOCAL = ${VIRGINS}/libftdi-${LIBFTDI_VERSION}.tar.gz +LIBFTDI_TARFILE_URL = http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${LIBFTDI_VERSION}.tar.gz + +LIBFTDI_SRC_DIR = ${HERE}/libftdi-${LIBFTDI_VERSION} +LIBFTDI_BUILD_DIR= ${HERE}/libftdi-build + +#======================================== +# Finally - OpenOCD... +# +OPENOCD_BUILD_DIR =${HERE}/openocd-build +OPENOCD_SRC_DIR =${HERE}/openocd + +#======================================== +# END .. +#======================================== |