diff options
Diffstat (limited to 'testing/examples')
4 files changed, 201 insertions, 201 deletions
diff --git a/testing/examples/AT91R40008Test/prj/at91r40008_reset.script b/testing/examples/AT91R40008Test/prj/at91r40008_reset.script index f90cde79..4cda1c58 100644 --- a/testing/examples/AT91R40008Test/prj/at91r40008_reset.script +++ b/testing/examples/AT91R40008Test/prj/at91r40008_reset.script @@ -1,7 +1,7 @@ -wait_halt
-sleep 10
-poll
-# Ethernut 3 remapping is required to access external flash memory.
-mww 0xffe00000 0x1000213d
-mww 0xffe00004 0x20003e3d
-mww 0xffe00020 0x00000001
+wait_halt +sleep 10 +poll +# Ethernut 3 remapping is required to access external flash memory. +mww 0xffe00000 0x1000213d +mww 0xffe00004 0x20003e3d +mww 0xffe00020 0x00000001 diff --git a/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg b/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg index 527e74b6..92cfb1d9 100644 --- a/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg +++ b/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg @@ -1,40 +1,40 @@ -#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-# tell gdb our flash memory map
-gdb_memory_map enable
-# enable flash programming
-gdb_flash_program enable
-
-#interface
-interface ft2232
-ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A"
-ft2232_layout turtelizer2
-ft2232_vid_pid 0x0403 0xbdc8
-jtag_speed 0
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_init 0 arm7tdmi
-run_and_halt_time 0 30
-
-target_script 0 reset .\prj\at91r40008_reset.script
-
-working_area 0 0x3C000 0x4000 nobackup
-flash bank cfi 0x10000000 0x400000 2 2 0
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration +telnet_port 4444 +gdb_port 3333 + +# tell gdb our flash memory map +gdb_memory_map enable +# enable flash programming +gdb_flash_program enable + +#interface +interface ft2232 +ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A" +ft2232_layout turtelizer2 +ft2232_vid_pid 0x0403 0xbdc8 +jtag_speed 0 +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only + +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag_device 4 0x1 0xf 0xe + +#target configuration +daemon_startup reset + +#target <type> <startup mode> +#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> +target arm7tdmi little run_and_init 0 arm7tdmi +run_and_halt_time 0 30 + +target_script 0 reset .\prj\at91r40008_reset.script + +working_area 0 0x3C000 0x4000 nobackup +flash bank cfi 0x10000000 0x400000 2 2 0 + +# For more information about the configuration files, take a look at: +# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger diff --git a/testing/examples/AT91R40008Test/prj/eclipse_ram.gdb b/testing/examples/AT91R40008Test/prj/eclipse_ram.gdb index d928ce28..62024971 100644 --- a/testing/examples/AT91R40008Test/prj/eclipse_ram.gdb +++ b/testing/examples/AT91R40008Test/prj/eclipse_ram.gdb @@ -1,14 +1,14 @@ -target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 sw_bkpts enable
-monitor mww 0xFFE00000 0x1000213D
-monitor mww 0xFFE00004 0x20003E3D
-monitor mww 0xFFE00020 0x00000001
-monitor mdw 0xFFE00000 1
-monitor mdw 0xFFE00004 1
-load
-break main
-continue
+target remote localhost:3333 +monitor reset +monitor sleep 500 +monitor poll +monitor soft_reset_halt +monitor arm7_9 sw_bkpts enable +monitor mww 0xFFE00000 0x1000213D +monitor mww 0xFFE00004 0x20003E3D +monitor mww 0xFFE00020 0x00000001 +monitor mdw 0xFFE00000 1 +monitor mdw 0xFFE00004 1 +load +break main +continue diff --git a/testing/examples/AT91R40008Test/prj/ethernut3_ram.ld b/testing/examples/AT91R40008Test/prj/ethernut3_ram.ld index 5e94195c..604e7041 100644 --- a/testing/examples/AT91R40008Test/prj/ethernut3_ram.ld +++ b/testing/examples/AT91R40008Test/prj/ethernut3_ram.ld @@ -1,140 +1,140 @@ -/****************************************************************************
-* Copyright (c) 2006 by Michael Fischer. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*
-* 1. Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* 2. Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in the
-* documentation and/or other materials provided with the distribution.
-* 3. Neither the name of the author nor the names of its contributors may
-* be used to endorse or promote products derived from this software
-* without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-* SUCH DAMAGE.
-*
-****************************************************************************
-*
-* History:
-*
-* 09.04.06 mifi First Version
-****************************************************************************/
-
-
-ENTRY(ResetHandler)
-SEARCH_DIR(.)
-
-/*
- * Define stack size here
- */
-FIQ_STACK_SIZE = 0x0100;
-IRQ_STACK_SIZE = 0x0100;
-ABT_STACK_SIZE = 0x0100;
-UND_STACK_SIZE = 0x0100;
-SVC_STACK_SIZE = 0x0400;
-
-/*
- * This file, ethernut3_ram.ld, locate the program in the internal
- * ram of the AT91R40008. For more information about the memory of the
- * AT91R40008 take a look in the AT91 ARM data sheet.
- * Reference is made to Rev. 1354D-ATARM-08/02
- *
- * Take a look at page 15, Memory Map, Figure 3
- */
-
-MEMORY
-{
- ram : org = 0x00000000, len = 256k
-}
-
-/*
- * Do not change the next code
- */
-SECTIONS
-{
- .text :
- {
- *(.vectors);
- . = ALIGN(4);
- *(.init);
- . = ALIGN(4);
- *(.text);
- . = ALIGN(4);
- *(.rodata);
- . = ALIGN(4);
- *(.rodata*);
- . = ALIGN(4);
- *(.glue_7t);
- . = ALIGN(4);
- *(.glue_7);
- . = ALIGN(4);
- etext = .;
- } > ram
-
- .data :
- {
- PROVIDE (__data_start = .);
- *(.data)
- . = ALIGN(4);
- edata = .;
- _edata = .;
- PROVIDE (__data_end = .);
- } > ram
-
- .bss :
- {
- PROVIDE (__bss_start = .);
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- PROVIDE (__bss_end = .);
-
- . = ALIGN(256);
-
- PROVIDE (__stack_start = .);
-
- PROVIDE (__stack_fiq_start = .);
- . += FIQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_fiq_end = .);
-
- PROVIDE (__stack_irq_start = .);
- . += IRQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_irq_end = .);
-
- PROVIDE (__stack_abt_start = .);
- . += ABT_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_abt_end = .);
-
- PROVIDE (__stack_und_start = .);
- . += UND_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_und_end = .);
-
- PROVIDE (__stack_svc_start = .);
- . += SVC_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_svc_end = .);
- PROVIDE (__stack_end = .);
- PROVIDE (__heap_start = .);
- } > ram
-
-}
-/*** EOF ***/
-
+/**************************************************************************** +* Copyright (c) 2006 by Michael Fischer. All rights reserved. +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* 1. Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* 2. Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the distribution. +* 3. Neither the name of the author nor the names of its contributors may +* be used to endorse or promote products derived from this software +* without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +* SUCH DAMAGE. +* +**************************************************************************** +* +* History: +* +* 09.04.06 mifi First Version +****************************************************************************/ + + +ENTRY(ResetHandler) +SEARCH_DIR(.) + +/* + * Define stack size here + */ +FIQ_STACK_SIZE = 0x0100; +IRQ_STACK_SIZE = 0x0100; +ABT_STACK_SIZE = 0x0100; +UND_STACK_SIZE = 0x0100; +SVC_STACK_SIZE = 0x0400; + +/* + * This file, ethernut3_ram.ld, locate the program in the internal + * ram of the AT91R40008. For more information about the memory of the + * AT91R40008 take a look in the AT91 ARM data sheet. + * Reference is made to Rev. 1354D-ATARM-08/02 + * + * Take a look at page 15, Memory Map, Figure 3 + */ + +MEMORY +{ + ram : org = 0x00000000, len = 256k +} + +/* + * Do not change the next code + */ +SECTIONS +{ + .text : + { + *(.vectors); + . = ALIGN(4); + *(.init); + . = ALIGN(4); + *(.text); + . = ALIGN(4); + *(.rodata); + . = ALIGN(4); + *(.rodata*); + . = ALIGN(4); + *(.glue_7t); + . = ALIGN(4); + *(.glue_7); + . = ALIGN(4); + etext = .; + } > ram + + .data : + { + PROVIDE (__data_start = .); + *(.data) + . = ALIGN(4); + edata = .; + _edata = .; + PROVIDE (__data_end = .); + } > ram + + .bss : + { + PROVIDE (__bss_start = .); + *(.bss) + *(COMMON) + . = ALIGN(4); + PROVIDE (__bss_end = .); + + . = ALIGN(256); + + PROVIDE (__stack_start = .); + + PROVIDE (__stack_fiq_start = .); + . += FIQ_STACK_SIZE; + . = ALIGN(4); + PROVIDE (__stack_fiq_end = .); + + PROVIDE (__stack_irq_start = .); + . += IRQ_STACK_SIZE; + . = ALIGN(4); + PROVIDE (__stack_irq_end = .); + + PROVIDE (__stack_abt_start = .); + . += ABT_STACK_SIZE; + . = ALIGN(4); + PROVIDE (__stack_abt_end = .); + + PROVIDE (__stack_und_start = .); + . += UND_STACK_SIZE; + . = ALIGN(4); + PROVIDE (__stack_und_end = .); + + PROVIDE (__stack_svc_start = .); + . += SVC_STACK_SIZE; + . = ALIGN(4); + PROVIDE (__stack_svc_end = .); + PROVIDE (__stack_end = .); + PROVIDE (__heap_start = .); + } > ram + +} +/*** EOF ***/ + |