summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
...
* bitq: unshadow pause()David Brownell2010-08-271-4/+4
| | | | | | | | bitq.c: In function ‘bitq_scan_field’: bitq.c:224: error: declaration of ‘pause’ shadows a global declaration /usr/include/unistd.h:429: error: shadowed declaration is here Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* imx35pdk: fix clock and reset delaysØyvind Harboe2010-08-192-0/+5
| | | | | | Use rclk and 100ms delay on ntrst Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* mcb1700: Keil MCB1700 w/1768 config scriptØyvind Harboe2010-08-172-12/+79
| | | | | | Ca. 93kBytes/s flashing speed @ 10MHz JTAG clock Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* update more Stellaris EK board commentsDavid Brownell2010-08-162-0/+4
| | | | | | | Using the bundled JTAG/SWD debug support in JTAG mode is optional on *all* of the EK boards. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* two NEWS updatesDavid Brownell2010-08-161-1/+3
| | | | | | | Mention AVR32 AP7000 support. Clarify ARM semihosting update was for V7M (not ARM9 etc). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Update comments for some Stellaris EK boards.David Brownell2010-08-162-1/+3
| | | | | | | These don't need to use the on-board debuggers in JTAG mode. Off-board is OK, as would be SWD mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* avr32: basic target scriptOleksandr Tymoshenko2010-08-151-0/+18
|
* at32ap7000 config fileDavid Brownell2010-08-151-0/+16
| | | | nice board to play with.
* avr32: work-in-progressOleksandr Tymoshenko2010-08-1510-0/+1769
| | | | | | | | | | | | | committed so as to ease cooperation and to let it be improved over time. So far it supports: - halt/resume - registers inspection - memory inspection/modification I'm still getting up to speed with OpenOCD internals and AVR32 so code is a little bit messy and I'd appreciate any feedback.
* Fix typo in usb_blaster_vid_pid error messageCatalin Patulea2010-08-141-1/+1
|
* Fix typo in documentation of usb_blaster_vid_pid commandCatalin Patulea2010-08-131-2/+2
|
* lpc1768: turn down the jtag clockØyvind Harboe2010-08-131-7/+9
| | | | | | | Tests should that it needs to be as low as 100kHz to be stable. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* Added support for the Lisa/L jtag LEDs.Piotr Esden-Tempski2010-08-131-1/+56
|
* Added Lisa/L script as a target board.Piotr Esden-Tempski2010-08-131-0/+7
|
* Added support for Lisa/L builtin JTAG interface.Piotr Esden-Tempski2010-08-132-0/+16
|
* at91cap7a-stk-sdram.cfg: faster resetØyvind Harboe2010-08-121-5/+5
| | | | | | crank up JTAG speed as soon as clocks are set up. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: fix handling of 'tap enable' errorThomas Koeller2010-08-121-2/+2
| | | | | | | | if a tap could not be _enabled_, the error message was 'failed to disable tap'. Fixed that. Also, display the failing tap's name. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
* DM36x: Set OSCDIV dividerThomas Koeller2010-08-121-0/+7
| | | | | | The ability to set up the OSCDIV divider was missing. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
* DM36x: Disable unused SYSCLKsThomas Koeller2010-08-121-1/+20
| | | | | | | | Clear the enable bits for all clocks that are not set explicitly. This is done to increase robustness by removing pre-existing state. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
* DM36x: Use enable bit for PLL pre-dividerThomas Koeller2010-08-121-1/+1
| | | | | | | The PLL pre- and postdividers seem to have enable bits, although these are not mentioned in the chip documentation. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
* str9x: faster flash erase of entire chipFredrik Hederstierna2010-08-121-6/+23
| | | | | | | The patch improves flash erase for STR9x in case of a full bank erase. Then the chip erase command is used instead which improves speed significantly. Also I think it might help if e.g. STR912 enters some state where flash banks are locked, and a chip erase command is the key for unlocking the flash.
* tcl: remove silly ocd_ prefix to array2mem and mem2arrayØyvind Harboe2010-08-119-20/+20
| | | | | | | | ocd_ prefix is used internally in OpenOCD as a kludge more or less to deal with the two kinds of commands that OpenOCD has. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* board: added at91cap7a stk w/sdram config scriptsØyvind Harboe2010-08-111-0/+165
| | | | | | | The strange thing here with this board is that 16MHz kinda works, but only 2MHz is really stable. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* debug: use assert's when approperiateØyvind Harboe2010-08-112-4/+2
| | | | | | error was returned instead of using assert. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm: add missing error reportingØyvind Harboe2010-08-113-1/+28
| | | | | | | when an unknown core mode is read from the target, report error. Can be communication failure. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* config scripts: remove useless reference to OpenOCD docsØyvind Harboe2010-08-1110-30/+0
| | | | | | clutters config scripts. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cfg: add omapl138 support and da850evm preliminary supportBen Gardiner2010-08-102-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the omapl138 target and preliminary support for the da850evm. The target cfg file is based on the icepick routing done by the target/ti_dm6446.cfg file. I have performed limited testing with this setup. I am posting this patch in the interest of sharing cfg files and in the hopes that the experts on this list can correct errors I have made or point out enhancements. The testing I have performed is debugging uboot with gdb where I also use the following local.cfg and gdbinit files. Debugging appears to work in so much as 'ni' works. local.cfg: gdb_memory_map disable gdbinit: target remote localhost:3333 set remote hardware-breakpoint-limit 2 set remote hardware-watchpoint-limit 2 monitor poll on Comments welcome. Best Regards, Ben Gardiner
* arm7/9: fix "reset run + halt"Øyvind Harboe2010-08-092-11/+27
| | | | | | | | | | | | | | | | if polling is off, then "reset run + halt" would fail since halt incorrectly assumed the target was in the reset state as it is the internal poll implementation that moves the sw tracking of the target state out of the reset state. To reproduce: > reset run; halt JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1) BUG: arm7/9 does not support halt during reset. This is handled in arm7_9_assert_reset() Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* target: if polling fails, back offØyvind Harboe2010-08-091-8/+29
| | | | | | | | | | | | back-off algorithm for polling. Double polling interval up to 5000ms when it fails. when polling succeeds, reset backoff. This avoids flooding logs(as much) when working with conditions where the target polling will fail. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* Luminary-icdi comment updateDavid Brownell2010-08-031-0/+4
| | | | | | | Clarify that ICDI is the generic logic, but this config is for the JTAG-only (no-SWD) mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* xscale documentation: vector table handlingMike Dunn2010-08-021-4/+22
| | | | | | | | | | | | | | | | | | | | | | | Hi everyone. I noticed some incorrect information in the user manual regarding how the vector table is handled on the xscale, so for your consideration, here's a short patch that corrects it, and adds a little more detail I thought might be helpful. The documentation states that OpenOCD does not attempt to synchronize the vector tables in memory with those stored in the "mini instruction cache". In fact, on each resume it does copy from memory to the cache all entries in the high and low tables that were not previously defined using the 'xscale vector_table' command. (In src/target/xscale.c, see xscale_update_vectors(), which is invoked by xscale_resume().) I take advantage of this during Linux boot-up. The extra detail describes in general terms how I do this. Corrections, comments are of course gratefully received. Thanks, Mike Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
* verify_image: print out a statement that there are no further errorsØyvind Harboe2010-08-021-1/+10
| | | | | | | | | It is useful to know that the printed errors are *all* the errors there were. Added missing error handling(found by inspection). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* zy1000: use correct base clock when calculating speed divisorØyvind Harboe2010-08-021-4/+11
| | | | | | revc uses 60MHz and revb 64MHz, use this in calculations. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* zy1000: print out khz correctly in response to setting JTAG speedØyvind Harboe2010-08-021-4/+33
| | | | | | Calculate printout based on same core routines. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* lpc1768: even if rclk "works", it isn't necessarily the correct clkØyvind Harboe2010-08-021-2/+6
| | | | | | rclk = 4MHz oon lpc1768, the correct JTAG clk is 666MHz(4MHz/6). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ioutil: fix internal fn namesØyvind Harboe2010-08-021-15/+11
| | | | | | prefix w/ioutil_ Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: measure_clk debug procØyvind Harboe2010-08-021-0/+9
| | | | | | | It can be useful to get an approximate measurement of rtck frequency for debugging purposes. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: add jtag_flush_queue_sleep debug commandØyvind Harboe2010-08-023-0/+45
| | | | | | | | it can be useful to throttle performance: test differences in behavior, test performance effect of long roundtrips. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* util: ms command to calculate length of operationsØyvind Harboe2010-08-015-2/+101
| | | | | | | This can be used to calculate approximate RTCK frequency for instance. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* Support NGX Technologies product NGX ARM USB JTAGPeter Stuge2010-08-011-0/+6
| | | | | This is a standard FT2232 device. More info at their web page: http://shop.ngxtechnologies.com/product_info.php?cPath=26&products_id=30
* Remove srst_pulls_trst from LPC2148 targetPeter Stuge2010-08-011-1/+1
| | | | | | | | | srst_pulls_trst is only true on some (broken) LPC2148 boards, a fact which is already documented in doc/openocd.texi, so it shouldn't be set unconditionally in the target tcl. This patch was needed to reflash when an Abort exception occured very early after reset, before OpenOCD tried to halt the CPU.
* stellaris flash comment updateDavid Brownell2010-08-011-1/+1
| | | | | | | | This flash driver works on more than just two chips. (Though it does need work still, e.g. to protect more than 64K. (On non-'3748-A0 chips where errata allow that.)) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* lpc7168: make flash available upon reset initØyvind Harboe2010-07-301-0/+19
| | | | | | | set user mode to avoid ROM being mapped at address 0 rather than flash. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* "transport select" returns Jim valueDavid Brownell2010-07-242-42/+31
| | | | | | | Make it scriptable, so code can be conditionalized based on what transport is in use for the session. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Buspirate: fix shadowMichal Demin2010-07-231-14/+14
|
* docs: removed unused cmd 'fast'Spencer Oliver2010-07-201-19/+0
| | | | | | The cmd fast was removed in commit c0d14dc7f19d785702eee5f69de5b1a63902554b Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* flash: remove algorithm exit_point address for supported targetsSpencer Oliver2010-07-204-5/+4
| | | | | | | | | For the above targets the exit_point is optional when used with run_algorithm, so remove it. This makes updating the algorithm less error prone. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* mips32: exit_point optional for mips32_run_algorithmSpencer Oliver2010-07-201-1/+1
| | | | | | | | | As the mips32 uses instruction breakpoints for algorithms we do not really need to check the pc on exit. This now matches the behaviour of the arm codebase. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* armv7m: exit_point optional for armv7m_run_algorithmSpencer Oliver2010-07-201-1/+1
| | | | | | | | | As the armv7m uses instruction breakpoints for algorithms we do not really need to check the pc on exit. This now matches the behaviour of the arm4_5 codebase. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* armv4_5: add algorithms instruction breakpoint supportSpencer Oliver2010-07-201-6/+16
| | | | | | | Update the arm_checksum_memory and arm_blank_check_memory algorithms to use a breakpoint instruction on v5 arch. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-01 13:27:41 +0000