summaryrefslogtreecommitdiff
path: root/src/flash
Commit message (Collapse)AuthorAgeFilesLines
* - added patch to display device information as INFO toomifi2007-12-091-3/+13
| | | | | | | | | | - added patch which fixes a crash upon flash write error - added patch which will improve the reset handling when SRST is tied to TRST (thanks to Oyvind Harboe for these patches) git-svn-id: svn://svn.berlios.de/openocd/trunk@218 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reset_run now works as expected on cortex-m3ntfreak2007-11-214-114/+275
| | | | | | | | | - str9xpec erase status checked on option byte programming - stm32x flash driver now supports sector protection - surplus exit removed from flash.c - openocd.texi documentation added git-svn-id: svn://svn.berlios.de/openocd/trunk@212 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - corrected str91x bank1 programming issuesntfreak2007-10-263-61/+65
| | | | | | | | - str91x protect_check fixed - bank number now correctly given to str91x flash_config command git-svn-id: svn://svn.berlios.de/openocd/trunk@211 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - cleaned up str7, str9 and stm32 flash driversntfreak2007-10-085-65/+145
| | | | | | | | | | | - str7 flash driver now checks correct busy bits depending on device - str9 flash driver now disables ITCM order as per st programming manual - added str7 disable_jtag command - added gdb_detach command - updated arm966e cp15 support - fix crash on mingw build when enabling target_request debugmsgs git-svn-id: svn://svn.berlios.de/openocd/trunk@209 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - flash autoerase <on|off> cmd added, default is off - flash banks are ↵ntfreak2007-10-012-22/+62
| | | | | | | | | | | calculated and erased prior to write (flash write_image only) - corrected array overrun in armv7m.c - corrected breakpoint memory allocation bug - image read now uses fgets, vastly improves reading of large files - improved hex file reading, support for Linear Address Record added git-svn-id: svn://svn.berlios.de/openocd/trunk@208 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Fixed display of sector sizes in flash.cmlu2007-09-102-28/+43
| | | | | | | | | - Clean up, remove unused variables and code in armv7, cortex_m3 and stellaris code - Move restore_context from cortex_m3 to armv7m - Updated halt handling for cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Support for AT91SAM7xx512 chipsmlu2007-08-201-134/+231
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@201 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Support for AT91SAM7xx512 chipsmlu2007-08-201-5/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@200 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - update jtag_speed setting when changing it during runtime with a FT2232 ↵drath2007-08-161-3/+6
| | | | | | | | | | | based interface - use 'etm trigger_percent' setting when programming ETB trigger count - fixed some small bugs in ETM trace analysis - fixed minor bug in flash writing (thanks to Pavel Chromy) git-svn-id: svn://svn.berlios.de/openocd/trunk@197 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fixed several bugs in flash writing code (thanks to Pavel Chromy)drath2007-08-162-112/+140
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@196 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not ↵drath2007-08-143-25/+76
| | | | | | | | | | | | | | | | functional yet). Configure option changed from --enable-presto to --enable-presto_ftd2xx and --enable-presto_libftdi - completed trace point support for use with ARM7/9 DCC - completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities) - fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy) - fixed bug in image_add_section (thanks to Pavel Chromy) - at91sam7 sector erase reworked (thanks to Pavel Chromy) - merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - renamed M5960 USB JTAG to "flyswatter"drath2007-08-1019-277/+505
| | | | | | | | | | | | | | | | | | | | - make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin) - various whitespace fixes - removed various warnings - add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann) - fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin) - switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed) - added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include semihosting, all ARM7/9 only for now) - added support for GDB vFlashXXX packets (thanks to Pavel Chromy) - added support for receiving data via ARM7/9 DCC - reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash write_image' (write image files (bin, hex, elf, s19) to a target). - added support for AMD/ST/SST 29F400B non-cfi flashes git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - corrected stm32x_handle_options_write_command, incorrect options printedntfreak2007-07-261-1/+1
| | | | | | - added prepare_reset_halt handler for cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@184 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reformat src/jtag/bitq.c (thanks to Pavel Chromy)drath2007-07-251-4/+1
| | | | | | | | | | | - fix multiple reads from FT2232 into same buffer location (thanks to Magnus Lundin) - retry JTAG chain validation (thanks to Magnus Lundin) - reworked GDB packet input handling (thanks to Pavel Chromy) - output error message when setting a watchpoint failed - removed duplicate out-of-bounds check in at91sam7.c (thanks to Pavel Chromy) git-svn-id: svn://svn.berlios.de/openocd/trunk@181 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for Asix Presto JTAG interface (thanks to Pavel Chromy and ↵drath2007-07-151-1/+1
| | | | | | | | | | | | Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fixed endianness helper macros (thanks to obilix and wiml for finding and ↵drath2007-06-281-1/+1
| | | | | | | | | | | | | fixing this bug) - added declarations for 32bit fileio access functions (network byte order) - fixed bug in etm trace dump file handling - added XScale trace buffer decoding - fixed arm_simulator ERROR numbers (-7xx used twice) - fixed minor bug in debug output in stellaris.c git-svn-id: svn://svn.berlios.de/openocd/trunk@178 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - ST STM32x cortex support addedntfreak2007-06-244-2/+949
| | | | | | | | - ST STM32x flash support added - cleaned up armv7m and cortex-m3 support, removed luminary specific code - cortex-m3 16bit read/write added (required for STM32x flash programming) git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - str9xpec driver was using stricmp, changed to strcmp for posix compatibilityntfreak2007-06-161-32/+4
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@175 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added mingw elf patches from Vincent Palatinntfreak2007-06-165-11/+1468
| | | | | | | - added str9x programming using flash controller tap (str9xpec), including option bytes and device lock/unlock - inttypes.h now used for long long printf style declarations git-svn-id: svn://svn.berlios.de/openocd/trunk@174 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Added patch for Luminar Micors Fury class devices (Joe Kroesche)mlu2007-06-142-10/+63
| | | | | | Added support for NVGM bit 2 for AT91SAM7XC128/256 git-svn-id: svn://svn.berlios.de/openocd/trunk@172 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added stellaris.[ch] missing from Cortex-M3 mergedrath2007-06-142-0/+891
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@171 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - merged support for Cortex-M3 from cortex-m3 branch (thanks to Magnus Lundin)drath2007-06-142-2/+4
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@170 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added manpage for OpenOCD (thanks to Uwe Hermann)drath2007-06-141-3/+1
| | | | | | | | | | - fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry - added support for auto image type detection (thanks to Vincent Palatin) - further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental) git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reworked image handling to support multiple sections (tested with ihex ↵drath2007-05-302-73/+64
| | | | | | | | | | file containing gaps) This checkin is still experimental, not recommended for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - split fileio handling into fileio part and image handlingdrath2007-05-297-199/+535
| | | | | | | | | | | - reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported) - added XScale debug handler binary to repository - added Thumb disassembling (thanks to Vincent Palatin for this patch) - added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported) This checkin is experimental, not suitable for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - correctly mask out bits that aren't part of a copied bufferdrath2007-04-121-1/+1
| | | | | | | | - fixed arm926ej-s CP15 register access handling - correctly identify SYSCLK source in LPC3180 NAND flash controller driver git-svn-id: svn://svn.berlios.de/openocd/trunk@139 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - disabled excessive debug output in jtag.hdrath2007-04-112-27/+802
| | | | | | | | | | - output all of EmbeddedICE version register in error message - update OpenOCD's idea of the current core mode, and immediately change core mode, on CPSR changes - added support for CFI cmdset 0002 (patch by Andrew Dyer, thanks a lot) - enhanced CFI cmdset 0002 support to Atmel AT49 flashes (thanks to Joerg Krein for providing test hardware) git-svn-id: svn://svn.berlios.de/openocd/trunk@138 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - merged XScale branch back into trunkdrath2007-03-281-4/+5
| | | | | | | | | - fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c - free working area and register stuff if str7x block write algorithm failed - check PC after exiting a target algorithm in armv4_5.c git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fixed arm926 cp15 command bug (thanks to Vincent Palatin for this patch)drath2007-03-264-22/+12
| | | | | | | | - fixed compiler warnings throughout the code (thanks to Vincent Palatin for this patch) - added support for accessing ETB (embedded trace buffer) registers git-svn-id: svn://svn.berlios.de/openocd/trunk@134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - reworked file i/o. every fileaccess (target, flash, nand, in future ↵drath2007-03-156-37/+2678
| | | | | | | | | | | | | | | | configuration, too) should now go through the fileio subsystem - added support for reading IHEX files (through fileio) - load/dump_binary renamed to the more generic load/dump_image <file> <address> ['bin'|'ihex'] - added NAND framework (preliminary) - added support for the LPC3180 SLC and MLC NAND controllers (preliminary) - fix initialization for parport - gw16012 fixes/cleanups - added EmbeddedICE version 7 (preliminary, reported on two LPC23xx devices so far) - added 'arm7_9 etm <target#>' configuration command to enable access to the ETM registers git-svn-id: svn://svn.berlios.de/openocd/trunk@132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add missing parentheses around macro parameters (thanks to Matthias Bauch ↵drath2007-02-031-1/+1
| | | | | | for noticing this bug and providing a fix) git-svn-id: svn://svn.berlios.de/openocd/trunk@130 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - merged several changes from XScaledrath2007-01-311-0/+3
| | | | | | | | - complain about identify_chain scan with all bits one (jtag communication problem) - add 0x80000 as a valid size for lpc2000_v2 flash banks (previously only the user accessible 0x7d000 were valid) git-svn-id: svn://svn.berlios.de/openocd/trunk@129 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fix incorrect parsing of whitespace in command.c (thanks to Magnus Lundin)drath2007-01-222-8/+53
| | | | | | | | | | | - fix infinite recursion in target_init_handler (thanks to jw and Magnus Lundin) - fix CFI flash handlign with buswidth < 32bit (thanks to Daniele Orio for reporting this) - add support for reading JTAG device id (currently only as debug output on startup) - cleaned up handling of EmbeddedICE registers. Supported functionality and register size now determined by EmbeddedICE version number. - small cleanups/fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@124 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - disabled FT2232 debug output (that code should be fairly stable)drath2007-01-091-0/+34
| | | | | | | | | | | | | - fixed bug in jtag.c where JTAG command type was wrong for PATHMOVE commands - added lattice ISP cable (experimental) - properly initialize parallel port (clear tristate bit) - fixed jtag/Makefile.am that failed with some versions of autotools - print error number if read() in gdbserver.c failed on Windows - fixed handling of opcodes with bits 27-25 b011 (comment was correct, code had a bug) - added support for AT91SAM7SE internal flash git-svn-id: svn://svn.berlios.de/openocd/trunk@122 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added a PLD (programmable logic device) subsystem for FPGA, CPLD etc. ↵drath2006-11-221-29/+63
| | | | | | | | | | | | configuration - added support for loading .bit files into Xilinx Virtex-II devices - added support for the Gateworks GW16012 JTAG dongle - merged CFI fixes from XScale branch - a few minor fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - correctly enter debug state on a "soft_reset_halt" commanddrath2006-11-051-0/+7
| | | | | | | | - several small fixes - retry reading from a FT2232 device on incomplete reads git-svn-id: svn://svn.berlios.de/openocd/trunk@110 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - several small fixes (thanks to Magnus Lundin and Spencer Oliver)drath2006-10-231-3/+3
| | | | | | | - added support for using Luminary Micro development board 'evb_lm3s811' as a JTAG interface (thanks to Magnus Lundin) git-svn-id: svn://svn.berlios.de/openocd/trunk@106 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for American Microsystem's M5960 (FT2232 based USB JTAG ↵drath2006-10-062-15/+45
| | | | | | | | | | interface) - added support for AT91SAM7A devices (thanks to Magnus Lundin) - updated README with pointer to Amontec's JTAGkeyTiny git-svn-id: svn://svn.berlios.de/openocd/trunk@102 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - str9x flash support (Thanks to Spencer Oliver)drath2006-09-286-2/+748
| | | | | | | | | | | | | - str75x flash support (Thanks to Spencer Oliver) - correct reporting of T-Bit in CPSR (Thanks to John Hartman for reporting this) - core-state (ARM/Thumb) can be switched by modifying CPSR - fixed bug in gdb_server register handling - register values > 32-bit should now be supported - several minor fixes and enhancements git-svn-id: svn://svn.berlios.de/openocd/trunk@100 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - allow writes to second flash bank on STR71x devices (cleaned up sector ↵drath2006-09-122-57/+142
| | | | | | | | | list building) - cleaned up str7x flash erase and protect code (use two accesses to erase sectors in both banks) git-svn-id: svn://svn.berlios.de/openocd/trunk@98 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - free working area used to store flash write bufferdrath2006-09-071-0/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@96 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - integrated patch from Magnus Lundin that fixes at91sam7 flash timing bugs ↵drath2006-09-075-83/+264
| | | | | | | | | | and possible endianness problems (big endian hosts) - correctly write trailing bytes on str7x flashes - speed up str7x flash writing by offloading the algorithm to the target git-svn-id: svn://svn.berlios.de/openocd/trunk@95 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - made lpc2000 code endianness safe (support big-endian hosts, target is ↵drath2006-08-311-11/+11
| | | | | | always little) git-svn-id: svn://svn.berlios.de/openocd/trunk@92 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - endianess fixes everywhere but in the flash code. flashing might still be ↵drath2006-08-313-8/+11
| | | | | | | | | | | | | | | | | broken on big-endian targets and/or hosts - added access to ARM920T vector catch register (via generic register mechanism) - don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache - read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands) - memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes) - made in_handler independent from in field (makes the handler more flexible) - added timeout to ft2232 when using D2XX library - fixed STR7x protection bit handling on second bank (thanks to Bernard) - added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen) - fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen) git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - renamed jtag_interface_t.support_statemove to ↵drath2006-08-171-1/+1
| | | | | | | | | | jtag_interface_t.support_pathmove (it is used to indicate jtag_add_pathmove support) - fixed small bug in str7x.c that printed an address instead of the target number in an error message - added support for Olimex ARM-USB-OCD. The new ft2232 layout is called "olimex-jtag" git-svn-id: svn://svn.berlios.de/openocd/trunk@87 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fixed a minor problem with the GDB server that could drop the first packet ↵drath2006-08-061-0/+8
| | | | | | | | | | | (non-fatal) - fixed some small memory leaks (thanks to Spencer Oliver) - verify chip- and buswidth of cfi flash configurations - added support for ARM966E based systems (tested only with ST micro STR9, thanks to Spencer Oliver) git-svn-id: svn://svn.berlios.de/openocd/trunk@81 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added configurable delays after reset lines get deasserted. useful if ↵drath2006-07-301-1/+7
| | | | | | | | | | | reset circuitry keeps lines asserted for too long. - additional debug output when opening the parallel port - fixed counting of available arm7/9 watchpoint units - 'flash write' now displays elapsed time git-svn-id: svn://svn.berlios.de/openocd/trunk@79 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Added support for native MinGW builds (thanks to Spencer Oliver and ↵drath2006-07-176-43/+236
| | | | | | | | | | Michael Fischer) - you still need to install GiveIO (not part of OpenOCD) - Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too) - various fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for AT91SAM7A3 flash (patch from andre renaud, thanks)drath2006-06-231-7/+25
| | | | | | | | | | - fix trunk build for mac os x (patch from Lauri Leukkunen, thanks) - added check for host endianness, defines WORDS_BIGENDIAN on a big-endian host (e.g. mac os-x) - fixed bug where endianness of memory accesses could be swapped on BE hosts - added space for zero termination of ftd2xx_layout string (from Magnus Ludin, tahnks) git-svn-id: svn://svn.berlios.de/openocd/trunk@73 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - prepare OpenOCD for branching, created ./trunk/drath2006-06-0211-0/+3946
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-16 07:11:10 +0000