summaryrefslogtreecommitdiff
path: root/src/target/xscale.c
Commit message (Collapse)AuthorAgeFilesLines
* image loading: fix problem with offsets > 0x80000000Bradey Honsinger2010-03-161-1/+1
| | | | | | | | | | | | | | | Fixes bug that prevented users from specifying a base address of 0x80000000 or higher in image commands (flash write_image, etm image, xscale trace_image). image.base_address is an offset from the start address contained in the image file (if there is one), or from 0 (for binary files). As a signed 32-bit int, it couldn't be greater than 0x7fffffff, which is a problem when trying to write a binary file to flash above that address. Changing it to a 64-bit long long keeps it as a signed offset, but allows it to cover the entire 32-bit address space. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* fix xscale icache and dcache commandsMike Dunn2010-03-111-3/+3
| | | | | | | | | Simple patch that fixes the broken xscale icache and dcache commands. This broke when the helper functions and macros were changed. [ dbrownell@users.sourceforge.net: don't use strcasecmp ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* jtag: jtag_add_ir_scan() now takes a single fieldØyvind Harboe2010-03-081-1/+1
| | | | | | | | In the code a single field was all that was ever used. Makes jtag_add_ir_scan() simpler and leaves more complicated stuff to jtag_add_plain_ir_scan(). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: retire tap fieldØyvind Harboe2010-03-081-31/+11
| | | | | | | | | | | | | | | | | jtag_add_dr/ir_scan() now takes the tap as the first argument, rather than for each of the fields passed in. The code never exercised the path where there was more than one tap being scanned, who knows if it even worked. This simplifies the implementation and reduces clutter in the calling code. use jtag_add_ir/dr_plain_scan() for more fancy situations. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ARM: keep a handle to the PCDavid Brownell2010-02-211-27/+39
| | | | | | | | | | | | | | | | Keep a handle to the PC in "struct arm", and use it. This register is used a fair amount, so this is a net minor code shrink (other than some line length fixes), but mostly it's to make things more readable. For XScale, fix a dodgy sequence while stepping. It was initializing a variable to a non-NULL value, then updating it to handle the step-over-active-breakpoint case, and then later testing for non-NULL to see if it should reverse that step-over-active logic. It should have done like ARM7/ARM9 does: init to NULL. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: help/usage updatesDavid Brownell2010-01-071-36/+43
| | | | | | | | | | | | | | Provide helptext which was sometimes missing; update some of it to be more accurate (mostly they display something w/no args). Usage syntax messages have the same EBNF as the User's Guide. In some cases, *exactly* what the user's guide shows... e.g. talking about "offset" not "address" for trace_image. Don't use "&function"; functions are like arrays, their name is their address. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: add comment re register exportsDavid Brownell2009-12-261-0/+1
| | | | Modern versions of GDB can understand VFP3 and iwMMXt hardware.
* XScale: better {read,write}_phys()David Brownell2009-12-181-2/+14
| | | | | | | | We can actually do the right thing if the MMU is off; save the error message for the phys-but-MMU-enabled path, which is what isn't yet supported. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: use all-ones for BYPASS, not five-onesDavid Brownell2009-12-151-1/+1
| | | | | | PXA3xx has more than five bits in IR. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: list number of HW breakpoints/watchpointsDavid Brownell2009-12-071-0/+3
| | | | | | | | | | | | | | | When starting up, say how many hardware breakpoints and watchpoints are available on various targets. This makes it easier to tell GDB how many of those resources exist. Its remote protocol currently has no way to ask OpenOCD for that information, so it must configured by hand (or not at all). Update the docs to mention this; remove obsolete "don't do this" info. Presentation of GDB setup information is still a mess, but at least it calls out the three components that need setup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: don't clone arm_arch_state() codeDavid Brownell2009-12-071-9/+2
| | | | | | | | | | | Have various ARM cores delegate to arm_arch_state() to display basic information, instead of duplicating that logic. This shrinks the code, makes them all report when semihosting is active, and highlights which data are specific to this core. (Like ARM720 not having separate instruction and data caches.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: use <target/arm.h> not armv4_5.hDavid Brownell2009-12-071-0/+1
| | | | | | | | | | | | | | Move most declarations in <target/armv4_5.h> to <target/arm.h> and update users. What's left in the older file is stuff that I think should be removed ... the old register cache access stuff, which makes it awkward to support microcontroller profile (Cortex-M) cores. The armv4_5_run_algorithm() declaration was moved too, even though it's not yet as generic as it probably ought to be. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: rename some generic routinesDavid Brownell2009-12-071-2/+2
| | | | | | | | | | | | | | | | Rename some (mostly) generic ARM functions: armv4_5_arch_state() --> arm_arch_state() armv4_5_get_gdb_reg_list() --> arm_get_gdb_reg_list() armv4_5_init_arch_info() --> arm_init_arch_info() Cores using the microcontroller profile may want a different arch_state() routine though. (Also fix strange indentation in arm_arch_state: use tabs only! And update a call to it, removing assignment-in-conditional.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: move opcode macros to <target/arm_opcodes.h>David Brownell2009-12-071-0/+1
| | | | | | | | | | | | | | | Move the ARM opcode macros from <target/armv4_5.h>, and a few Thumb2 ones from <target/armv7m.h>, to more appropriate homes in a new <target/arm_opcodes.h> file. Removed duplicate opcodes from that v7m/Thumb2 set. Protected a few macro argument references by adding missing parentheses. Tightening up some of the line lengths turned up a curious artifact: the macros for the Thumb opcodes are all 32 bits wide, not 16 bits. There's currently no explanation for why it's done that way... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: rename armv4_5_build_reg_cache() as arm_*()David Brownell2009-12-041-1/+1
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: ARMV4_5_COMMON_MAGIC --> ARM_COMMON_MAGICDavid Brownell2009-12-041-1/+1
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: switch target_to_armv4_5() to target_to_arm()David Brownell2009-12-041-3/+3
| | | | | | And remove that old symbol. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: rename armv4_5_state_* as arm_state_*David Brownell2009-12-041-1/+1
| | | | | | And make arm_state_strings[] be const. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: rename armv4_5_mode_* AS arm_mode_*David Brownell2009-12-041-4/+4
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: rename ARMV4_5_MODE_* as ARM_MODE_*David Brownell2009-12-041-5/+5
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: rename ARMV4_5_STATE_* as ARM_STATE_*David Brownell2009-12-041-5/+5
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* change #include "time_support.h" to <helper/time_support.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "time_support.h" the following form should be used. #include <helper/time_support.h> The exception is from .c files in the same directory.
* XScale: restore_context() cleanupDavid Brownell2009-11-301-38/+30
| | | | | | | | | | | Clean up two aspects to this routine: bad naming, since it doesn't restore the context, just the banked registers; and excess indentation for the bulk of the code. Also make some of its call sites stash the function's return code; someday they should use it for error checking. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: context restore, cleanup/bugfixDavid Brownell2009-11-301-15/+29
| | | | | | | | | | | | | | This "loop over all registers" routine shared the same mess as full_context() in terms of dozens of needless number_to_mode() calls. Fix that, and comments, with related cleanup. The misnamed xscale_restore_context() had a related bug. It was restoring the *WRONG REGISTERS* ... always from whatever the current mode was, instead of using the copy from whichever register bank it was trying to restore. (But it marked the intended register as having been restored...) Fixed that. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: clean up full_context() (#2)David Brownell2009-11-291-39/+30
| | | | | | | Streamline the loop by continuing as soon as we know there's no work to be done; this lets us un-indent almost everything. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: clean up full_context() (#1)David Brownell2009-11-291-17/+32
| | | | | | | | | When fetching all the registers, XScale was doing various stupid things like calling number_to_mode() a few dozen times instead of just once, and mapping access to each register three times (again, instead of just once). Stop that. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: debug entry uses new register mappingDavid Brownell2009-11-291-9/+10
| | | | | | | | Use the new mapping interfaces in the debug entry path. SPSR and the banked registers now have smaller and faster accessors ... use them. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: initial PXA3xx supportMarek Vasut2009-11-291-11/+32
| | | | | | [dbrownell@users.sourceforge.net: user's guide; variant param is optional] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: uplevel add_{break,watch}point() error checksDavid Brownell2009-11-281-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | In target_type.h it's documented that the target must be halted for add_breakpoint() ... and with slight ambiguity, also for its add_watchpoint() sibling. So rather than verifying that constraint in the CPU drivers, do it in the target_add_{break,watch}point() routines. Add minor paranoia on the remove_*point() paths too: save the return value, and print it out in in the LOG_DEBUG message in case it's nonzero. Note that with some current cores, like all ARMv7 ones I've looked at, there's no technical issue preventing watchpoint or breakpoint add/remove operations on active cores. This model seems deeply wired into OpenOCD though. ALSO: the ARM targets were fairly "good" about enforcing that constraint themselves. The MIPS ones were relied on other code to catch such stuff, but it's not clear such code existed ... keep an eye out for new issues on MIPS. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: add stub {read,write}_phys routinesDavid Brownell2009-11-261-0/+20
| | | | | | | | | Just make these fail, instead of letting them write over potentially random memory. Users should be able to work around the lack of real implementations by disbling the MMU by hand ... until someone provides a Real Fix. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* use ARRAY_SIZE macroZachary T Welch2009-11-251-2/+2
| | | | | Search and destroy lingering cases where the ARRAY_SIZE macro should be used to convey more intrinsic meaning in the OpenOCD code.
* remove target_type register_command callbackZachary T Welch2009-11-241-9/+4
| | | | | | Uses chaining of command_registration structures to eliminate all target_type register_callback routines. Exports the command_handler registration arrays for those target types that are used by others.
* xscale: use register_commands()Zachary T Welch2009-11-241-23/+107
|
* use COMMAND_REGISTER macroZachary T Welch2009-11-241-14/+14
| | | | | Replaces direct calls to register_command() with a macro, to allow its parameters to be changed and callers updated in phases.
* ARM: remove 'armv4_5_common_s' migration #defineDavid Brownell2009-11-221-10/+10
| | | | | | Finish migrating from the old symbol to the new one. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: arm_set_cpsr() handles T and J bitsDavid Brownell2009-11-221-6/+0
| | | | | | | | | | | | | | Have arm_set_cpsr() handle the two core state flags, updating the CPU state. This eliminates code in various debug_entry() paths, and marginally improves handling of the J bit. Catch and comment a few holes in the handling of the J bit on ARM926ejs cores ... it's unlikely our users will care about Jazelle mode, but we can at least warn of Impending Doom. If anyone does use it, these breadcrumbs may help them to find the right path through the code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: define two register utilitiesDavid Brownell2009-11-221-4/+1
| | | | | | | | | | | | | | Define arm_reg_current() ... returning handle to a given register, and encapsulating the current mode's register shadowing. It's got one current use, for reporting the current register set to GDB. This will let later patches clean up much ARMV4_5_CORE_REG_MODE() nastiness, saving a bit of code. Define and use arm_set_cpsr() ... initially it updates the cached CPSR and sets up state used by arm_reg_current(), plus any SPSR handle. (Later: can also set up for T and J bits.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: simplify CPSR handlingDavid Brownell2009-11-221-10/+16
| | | | | | | | | | | | | | Stash a pointer to the CPSR in the "struct arm", to help get rid of the (common) references to its index in the register cache. This removes almost all references to CPSR offsets outside of the toplevel ARM code ... except a pair related to the current ARM11 "simulator" logic (which should be removable soonish). This is a net minor code shrink of a few hundred bytes of object code, and also makes the code more readable. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: pass 'struct reg *' to register r/w routinesDavid Brownell2009-11-201-5/+6
| | | | | | | | | | | | | | | | Implementations need to access the register struct they modify; make it easier and less error-prone to identify the instance. (This removes over 10% of the ARMV4_5_CORE_REG_MODE nastiness...) Plus some minor fixes noted when making these updates: ARM7/ARM9 accessor methods should be static; don't leave CPSR wrongly marked "dirty"; note significant XScale omissions in register handling; and have armv4_5_build_reg_cache() record its result. Rename "struct armv4_5_core_reg" as "struct arm_reg"; it's used for more than those older architecture generations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: create/use register_cache_invalidate()David Brownell2009-11-191-4/+3
| | | | | | | | | | | | | | | Create a generic register_cache_invalidate(), and use it to replace three all-but-identical core-specific routines: - armv4_5_invalidate_core_regs() - armv7m_invalidate_core_regs - mips32_invalidate_core_regs() too. Make cache->num_regs be unsigned, avoiding various errors. Net code shrink and simplification. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* use COMMAND_PARSE_ENABLE macro where appropriateZachary T Welch2009-11-181-38/+23
| | | | | | | | Updates all command parsing of simple "enable" and "disable" arguments. A few case in the tree use a tri-state or extended arguments, which cannot use this simple macro. Simlifies the xscale icache/dcache command handler logic.
* ARM: add is_arm_mode()David Brownell2009-11-171-4/+1
| | | | | | | | | | | | | | | | | | Add a new is_arm_mode() predicate, and use it to replace almost all calls to current armv4_5_mode_to_number(). Eventually those internal mode numbers should vanish... along with their siblings in the armv7a.c file. Remove a handful of superfluous checks ... e.g. the mode number was just initialized, or (debug entry methods) already validated. Move one of the macros using internal mode numbers into the only file which uses that macro. Make the tables manipulated with those numbers be read-only and, where possible, static so they're not confused with part of the generic ARM interface. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: add arm_mode_name()David Brownell2009-11-171-2/+3
| | | | | | | | | | | | | | | Add and use arm_mode_name() to map from PSR bits to user meaningful names. It uses a new table which, later, can be used to hold other mode-coupled data. Add definitions for the "Secure Monitor" mode, as seen on some ARM11 cores (like ARM1176) and on Cortex-A8. The previous mode name scheme didn't understand that mode. Remove the old mechanism ... there were two copies, caused by Cortex-A8 needing to add "Secure Monitor" mode support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* command_handler: change 'cmd_ctx' to CMD_CTXZachary T Welch2009-11-171-46/+46
| | | | Convert all command handler 'cmd_ctx' parameter usage with CMD_CTX.
* command_handler: change 'args' to CMD_ARGVZachary T Welch2009-11-171-25/+25
| | | | | This patch converts all instances of 'args' in COMMAND_HANDLER routines to use CMD_ARGV macro.
* command_handler: change to 'argc' to CMD_ARGCZachary T Welch2009-11-171-19/+19
| | | | | This patch converts all instances of 'argc' in COMMAND_HANDLER routines to use CMD_ARGC.
* target: simplify register get/set opsDavid Brownell2009-11-171-7/+6
| | | | | | | | | | | No need to indirect from registered integers to pointers. Just stash the pointers directly in the register struct, and don't even bother registering. This is a small code shrink, speeds register access just a smidgeon, and gets rid of another rude exit() path. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: remove some more duplicate includesDavid Brownell2009-11-171-1/+1
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: fewere exit() callsDavid Brownell2009-11-161-4/+4
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* fileio: improve API typesZachary T Welch2009-11-161-1/+1
| | | | | | | | | | | | | Use size_t instead of uint32_t when specifying file sizes. Update all consumers up through the layers to use size_t when required. These changes should be safe, but the higher-levels will need to be updated further to receive the intended benefits (i.e. large file support). Add error checking for fileio_read and file_write. Previously, all errors were being silently ignored, so this change might cause some problems for some people in some cases. However, it gives us the chance to handle any errors that do occur at higher-levels, rather than burying our heads in the sand.
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-05 03:50:56 +0000