summaryrefslogtreecommitdiff
path: root/src/target
Commit message (Collapse)AuthorAgeFilesLines
...
* ARM DPM: share debug reason logicDavid Brownell2009-12-037-100/+60
| | | | | | | | | | | | | | | | | | No point in both ARM11 and Cortex-A8 having private copies of the logic sorting out e.g. DBG_REASON_WATCHPOINT. Add and use a shared routine for this ... there's actually a bunch more debug entry logic that could be shared, this is just a start on that. Note that this routine fixes a bug observed in the ARM11 code, where some abort mode quirks were displayed as being an unknown debug reason; and also silences needless ARM11 chatter. Likewise with private copies of DSCR ... add one to the DPM struct. Save it as part of setting DBG_REASON_* so later patches can switch over to using that copy. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM11: use shared DSCR bit namesDavid Brownell2009-12-033-42/+24
| | | | | | | | | | | | | For the bits now defined in "arm_dpm.h", switch to the shared DSCR_* symbol and remove the ARM11_DSCR_* version. Define DSCR_INT_DIS and use it instead of the ARM11_DSCR_* sibling symbol. (Note: for both ARM11 and Cortex-A8, this should arguably be enabled by default when single stepping.) Remove some other unused declarations in "arm11.h". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM DPM: make DSCR bit defs sharableDavid Brownell2009-12-033-33/+43
| | | | | | | | | | | | | | | | Move the symbols for these bits from "armv7a.h" to "arm_dpm.h", where they can be seen and used not just by Cortex-A but also by the ARM11 (armv6) code. Change them from bit numbers to bit masks ... this matches the usage in ARM11 code, and also makes it easier to read. Rename DSCR_EXT_INT_EN as DSCR_ITR_EN to match the docs; it's enabling ITR functionality, not external interrupts, so this changes the name to be less misleading. (There *IS* a bit affecting interrupts, and this isn't it.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* remove tertiary include pathsZachary T Welch2009-12-031-4/+1
| | | | | With all #include directives converted, we only need to have the top-level src/ directory in the search path.
* change #include "../hello.h" to "hello.h"Zachary T Welch2009-12-031-1/+1
| | | | | | Before we can -I the top-level src/ directory alone, references to "hello.h" must be updated. This is an internal header, so it does not need angle brackets.
* change #include "trace.h" to <target/trace.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "trace.h" the following form should be used. #include <target/trace.h> The exception is from .c files in the same directory.
* change #include "target.h" to <target/target.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "target.h" the following form should be used. #include <target/target.h> The exception is from .c files in the same directory.
* change #include "mips_ejtag.h" to <target/mips_ejtag.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "mips_ejtag.h" the following form should be used. #include <target/mips_ejtag.h> The exception is from .c files in the same directory.
* change #include "mips32_pracc.h" to <target/mips32_pracc.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "mips32_pracc.h" the following form should be used. #include <target/mips32_pracc.h> The exception is from .c files in the same directory.
* change #include "etm.h" to <target/etm.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "etm.h" the following form should be used. #include <target/etm.h> The exception is from .c files in the same directory.
* change #include "embeddedice.h" to <target/embeddedice.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "embeddedice.h" the following form should be used. #include <target/embeddedice.h> The exception is from .c files in the same directory.
* change #include "armv7m.h" to <target/armv7m.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv7m.h" the following form should be used. #include <target/armv7m.h> The exception is from .c files in the same directory.
* change #include "armv7a.h" to <target/armv7a.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv7a.h" the following form should be used. #include <target/armv7a.h> The exception is from .c files in the same directory.
* change #include "armv4_5_mmu.h" to <target/armv4_5_mmu.h>Zachary T Welch2009-12-035-5/+5
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv4_5_mmu.h" the following form should be used. #include <target/armv4_5_mmu.h> The exception is from .c files in the same directory.
* change #include "armv4_5_cache.h" to <target/armv4_5_cache.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv4_5_cache.h" the following form should be used. #include <target/armv4_5_cache.h> The exception is from .c files in the same directory.
* change #include "armv4_5.h" to <target/armv4_5.h>Zachary T Welch2009-12-035-5/+5
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "armv4_5.h" the following form should be used. #include <target/armv4_5.h> The exception is from .c files in the same directory.
* change #include "arm_jtag.h" to <target/arm_jtag.h>Zachary T Welch2009-12-033-3/+3
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm_jtag.h" the following form should be used. #include <target/arm_jtag.h> The exception is from .c files in the same directory.
* change #include "arm_dpm.h" to <target/arm_dpm.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm_dpm.h" the following form should be used. #include <target/arm_dpm.h> The exception is from .c files in the same directory.
* change #include "arm_adi_v5.h" to <target/arm_adi_v5.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm_adi_v5.h" the following form should be used. #include <target/arm_adi_v5.h> The exception is from .c files in the same directory.
* change #include "arm9tdmi.h" to <target/arm9tdmi.h>Zachary T Welch2009-12-033-3/+3
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm9tdmi.h" the following form should be used. #include <target/arm9tdmi.h> The exception is from .c files in the same directory.
* change #include "arm7tdmi.h" to <target/arm7tdmi.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm7tdmi.h" the following form should be used. #include <target/arm7tdmi.h> The exception is from .c files in the same directory.
* change #include "arm7_9_common.h" to <target/arm7_9_common.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm7_9_common.h" the following form should be used. #include <target/arm7_9_common.h> The exception is from .c files in the same directory.
* change #include "arm11.h" to <target/arm11.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "arm11.h" the following form should be used. #include <target/arm11.h> The exception is from .c files in the same directory.
* change #include "jtag.h" to <jtag/jtag.h>Zachary T Welch2009-12-035-5/+5
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "jtag.h" the following form should be used. #include <jtag/jtag.h> The exception is from .c files in the same directory.
* change #include "types.h" to <helper/types.h>Zachary T Welch2009-12-039-9/+9
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "types.h" the following form should be used. #include <helper/types.h> The exception is from .c files in the same directory.
* change #include "time_support.h" to <helper/time_support.h>Zachary T Welch2009-12-039-9/+9
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "time_support.h" the following form should be used. #include <helper/time_support.h> The exception is from .c files in the same directory.
* change #include "replacements.h" to <helper/replacements.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "replacements.h" the following form should be used. #include <helper/replacements.h> The exception is from .c files in the same directory.
* change #include "log.h" to <helper/log.h>Zachary T Welch2009-12-0310-10/+10
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "log.h" the following form should be used. #include <helper/log.h> The exception is from .c files in the same directory.
* change #include "jim.h" to <helper/jim.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "jim.h" the following form should be used. #include <helper/jim.h> The exception is from .c files in the same directory.
* change #include "fileio.h" to <helper/fileio.h>Zachary T Welch2009-12-031-1/+1
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "fileio.h" the following form should be used. #include <helper/fileio.h> The exception is from .c files in the same directory.
* change #include "command.h" to <helper/command.h>Zachary T Welch2009-12-032-2/+2
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "command.h" the following form should be used. #include <helper/command.h> The exception is from .c files in the same directory.
* change #include "binarybuffer.h" to <helper/binarybuffer.h>Zachary T Welch2009-12-035-5/+5
| | | | | | | | | | | | Changes from the flat namespace to heirarchical one. Instead of writing: #include "binarybuffer.h" the following form should be used. #include <helper/binarybuffer.h> The exception is from .c files in the same directory.
* allow #include directives to use module nameZachary T Welch2009-12-031-0/+1
| | | | | | | | | | | | Includes the src directory in the search path, so header files may be migrated from: #include "foo.h" to #include <module/foo.h> which is more conducive for installation.
* feroceon.c should be part of ARM7_9_SRCNicolas Pitre2009-12-031-2/+2
| | | | | | | The Feroceon and Dragonite cores are similar to the ARM926 and ARM966 cores respectively. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* ARM11: don't expose DSCRDavid Brownell2009-12-022-185/+7
| | | | | | | | | | | Remove the remaining extra copy of DSCR, and the register cache of which it was a part. That cache wasn't a very safe, or even necessary, idea; it was essentialy letting debugger-private state be manipulated by Tcl code that couldn't know how to do it right. This makes the "reg" output of an ARM11 resemble what most other ARM cores produce ... forward motion in the "make ARM11 work like the rest of the ARM cores" Jihad!
* ARM11: store a clean copy of DSCRDavid Brownell2009-12-024-76/+56
| | | | | | | Just store a clean copy of DSCR in the per-CPU struct, so we trivially pass a pointer to a recent copy. This replaces the previous "last_dscr" and cleans up most of the related calling conventions ... but it doesn't remove the other DSCR copy.
* ARM11: don't expose WDTRDavid Brownell2009-12-022-14/+11
| | | | | | | | | Don't expose the WDTR register through the register cache any more. If anyone wants Tcl scripts to be able to use DCC based communication with app code in the target, this wouldn't do it. Bugfix: don't trust the Tcl-accessible version of DSCR to flag whether WDTR needs to be restored when resuming.
* ARM11: don't expose RDTRDavid Brownell2009-12-022-15/+11
| | | | | | | | | Don't expose the RDTR register through the register cache any more. If anyone wants Tcl scripts to be able to use DCC based communication with app code in the target, this wouldn't do it. Bugfix: don't trust the Tcl-accessible version of DSCR to flag whether RDTR needs to be restored when resuming.
* ARM11: streamline debug entryDavid Brownell2009-12-021-25/+20
| | | | | | | | | | | | | Streamline arm11_on_enter_debug_state() entry: - It should handle the standard updates: * target->debug_reason * target->state - Don't waste time re-reading DSCR; just pass it in Also rename the routine to "arm11_debug_entry()", matching the convention used elsewhere in OpenOCD.
* ARM11: remove arm11->targetDavid Brownell2009-12-023-20/+12
| | | | | Don't need/want arm11->target; we have arm11->arm.target instead. Also remove some unused watchpoint stuff.
* ARM DPM: tweak initializationDavid Brownell2009-12-026-23/+33
| | | | | | Move the initial breakpoint/watchpoint disable calls to arm_dpm_initialize(), and start using that routine. This split helps with arm11 support.
* adding files required for distributionZachary T Welch2009-12-021-0/+1
| | | | | Add headers missing from Makefile rules to pass 'make distcheck'. These were included in the tree but were not added with those commits.
* fix 'target init' command registrationZachary T Welch2009-12-021-6/+6
| | | | | The command handler registration was put at the top level, rather than as a subcommand. Move it to where it belongs.
* target: factor init to 'target init'Zachary T Welch2009-12-021-0/+23
| | | | Adds 'target init' command handler, called as part of 'init'.
* target: factor target_init() into piecesZachary T Welch2009-12-021-69/+84
| | | | | Moves body of target initialization loop into a helper function, cleaning up its visual flow in the process.
* ARMv7a/Cortex-A8: report watchpoint trigger insnDavid Brownell2009-12-025-44/+33
| | | | | | | | | | | Save and display the address of the instruction which triggered the watchpoint. Because of pipelining, that's well behind the PC value when debug entry completes. (Example in a subroutine that had been returned from...) Remove unused A8 stuff, mostly watchpoint hooks from the header. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: label SP and LR correctlyDavid Brownell2009-12-021-12/+12
| | | | | | | | | | | Except for USR/SYS mode, the labels for the shadowed SP and LR registers were reversed. LR is r14; SP is r13. Fix. This would not affect GDB users; GDB references are positional. Only folk working directly with OpenOCD register values would have noticed this bug. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Cortex-A8: basic watchpoint supportDavid Brownell2009-12-011-0/+66
| | | | | | | Actually this should handle both breakpoints and watchpoints ... but the DPM framework only handles watchpoints for now. Works on Beagle. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: core DPM support for watchpointsDavid Brownell2009-12-014-41/+302
| | | | | | | | | | | | | | | | | | | | | This is a NOP unless the underlying core exposes two new methods, and neither of the two cores using this (ARM11xx, Cortex-A8) do so yet. This patch only updates those cores so they pass a flag saying whether or not to update breakpoint and watchpoint status before resuming; and removing some now-needless anti-segfault code from ARM11. Cortex-A8 didn't have that code ... yes, it segfaulted when setting watchpoints. NOTE: this uses a slightly different strategy for setting/clearing breakpoints than the ARM7/ARM9/etc code uses. It leaves them alone unless it's *got* to change something, to speed halt/resume cycles (including single stepping). ALSO NOTE: this under-delivers for Cortex-A8, where regions with size up to 2 GBytes can be watched ... it handles watchpoints which ARM11 can also handle (size 1/2/4 bytes). Should get fixed later. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARMv7a: move constants out of Cortex-A8 headerDavid Brownell2009-12-012-35/+48
| | | | | | These are architecturally defined, not core-specific. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-09 22:12:19 +0000