summaryrefslogtreecommitdiff
path: root/tcl/board
Commit message (Collapse)AuthorAgeFilesLines
* SDRAM and clock configuration for the SAM9-L9260 board from OlimexDean Glazeski2009-10-181-6/+85
|
* Fw: [PATCH] OpenRD board configurationWookey2009-10-141-0/+122
| | | | | | | | | | | | | | | | | Ofrwarded from Ron, who's not subscribed. ----- Forwarded message from Ron <ron@debian.org> ----- From: Ron <ron@debian.org> Date: Wed, 14 Oct 2009 04:50:17 +1030 To: wookey@debian.org Subject: [PATCH] OpenRD board configuration X-Spam-Status: No, score=-3.6 required=4.5 tests=BAYES_00,RCVD_IN_DNSWL_LOW autolearn=ham version=3.2.5 This piggybacks on the 'sheevaplug' layout which uses the same Kirkwood SoC. Signed-off-by: Ron Lee <ron@debian.org>
* iMX target config script's ported from Freescale BSP.Øyvind Harboe2009-10-142-65/+27
|
* burst writes work fine. clean up junk.Øyvind Harboe2009-10-121-3/+0
|
* Added tip in documentation on how to translate quirky syntaxØyvind Harboe2009-10-091-0/+3
|
* Function to flash SheevaPlug u-boot sectorsRabeeh Khoury2009-10-081-0/+11
| | | | | This function is used by the SheevaPlug installer to flash the erase and re-flash the U-Boot environment in the NAND Flash.
* initial builds of OSK5912 boards need srst_pulls_trstDavid Brownell2009-10-081-0/+4
| | | | | | | | | | | | This is clearly noted in the hardware spec (section 5.2.3); it works around a chip erratum: "If the MPU_RESET signal is used, it may cause the EMIFS bus to lock." I seem to have a board with such an initial build. The chip is labeled XOMAP. Presumably, parts without that "X" prefix (eXperimental) resolve this. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* first stab at imx35 reset init scriptoharboe2009-10-071-0/+272
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2817 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* remove recrusive reset invocation from reset init callbackoharboe2009-10-071-5/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2816 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add basic support for DM6446 EVM board.dbrownell2009-10-061-0/+74
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2808 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* stop using targetnumoharboe2009-10-061-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2804 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove annoying EOL whitespace (again, sigh).dbrownell2009-09-303-7/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2781 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* strip gdb config optionsoharboe2009-09-301-4/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2779 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* michal smulski <michal.smulski@ooma.com> reset now worksoharboe2009-09-301-17/+23
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2778 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* On DM355 EVM board, associate NAND chips with $_TARGETNAMEdbrownell2009-09-261-2/+2
| | | | | | | instead of a target number. git-svn-id: svn://svn.berlios.de/openocd/trunk@2761 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Michael Hasselberg <mh@open-engineering.de> target configuration files for ↵oharboe2009-09-252-0/+243
| | | | | | Toshiba TX09 familiy git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove annoying end-of-line whitespace from tcl/* filesdbrownell2009-09-2121-194/+194
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Ethan Eade <ethan@evolution.com> board config script for Cogent CSB732 ↵oharboe2009-09-211-0/+71
| | | | | | i.MX35 (arm1136) git-svn-id: svn://svn.berlios.de/openocd/trunk@2741 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Rolf Meeser <rolfm_9dq@yahoo.de> adds flash support for NXP's LPC2900 family ↵oharboe2009-09-161-0/+105
| | | | | | (ARM968E). git-svn-id: svn://svn.berlios.de/openocd/trunk@2715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> oharboe2009-09-121-3/+84
| | | | | | | | | | | | | | Update the board config for the DaVinci DM355 EVM so the reset-init event handler does the rest of the work it should do: - minor PLL setup bugfixes - initialize the DDR2 controller - probe both NAND banks - initialize UART0 - enable the icache git-svn-id: svn://svn.berlios.de/openocd/trunk@2699 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* michal smulski <michal.smulski@ooma.com> telo target/board scriptsoharboe2009-09-101-0/+54
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2683 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Dirk Behme <dirk.behme@googlemail.com> Add default fall back freqency.oharboe2009-09-041-0/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2670 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Gary Carlson <gcarlson@carlson-minot.com> config fileoharboe2009-08-311-0/+204
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2657 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Ferdinand Postema <ferdinand@postema.eu> config script for the MMnet1001 ↵oharboe2009-08-311-0/+83
| | | | | | module from Propox. git-svn-id: svn://svn.berlios.de/openocd/trunk@2656 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have ↵oharboe2009-08-284-6/+0
| | | | | | | | | | | TRST signals, so defining ntrst_delay is pointless; don't. At least the LM3S3748 eval board doesn't need nsrst_delay either; remove that too. git-svn-id: svn://svn.berlios.de/openocd/trunk@2645 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Brian Findlay <findlaybrian@gmail.com> finalize mini2440.cfgoharboe2009-08-251-3/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2611 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things around to the ↵oharboe2009-08-213-181/+0
| | | | | | right spots. Should have been done in previous commit. git-svn-id: svn://svn.berlios.de/openocd/trunk@2604 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* native line endingsoharboe2009-08-215-284/+284
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2603 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Pieter Conradie <Pieter.Conradie@psitek.com> Scripts for Atmel AT91SAM7S256 ↵oharboe2009-08-215-0/+284
| | | | | | and AT91SAM9260 git-svn-id: svn://svn.berlios.de/openocd/trunk@2602 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Brian Findlay <findlaybrian@gmail.com> Board support for mini2440 ↵oharboe2009-08-181-0/+321
| | | | | | (friendlyARM) samsung s3c2440 based board git-svn-id: svn://svn.berlios.de/openocd/trunk@2593 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Xiaofan Chen <xiaofanc@gmail.com> Split LM3S811 config file into target file ↵oharboe2009-08-161-0/+19
| | | | | | and board file git-svn-id: svn://svn.berlios.de/openocd/trunk@2584 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Xiaofan Chen <xiaofanc@gmail.com> Add config file for TI-Luminary LM3S1968 ↵oharboe2009-08-161-0/+23
| | | | | | chip and EK-LM3S1968 board git-svn-id: svn://svn.berlios.de/openocd/trunk@2582 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Audrius Urmanavičius [didele.deze@gmail.com]:ntfreak2009-08-131-0/+8
| | | | | | | Add flash programming support for NXP LPC1700 cortex_m3 based family git-svn-id: svn://svn.berlios.de/openocd/trunk@2579 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Jonathan Cameron <jic23@cam.ac.uk> fix regression from 1836 when the ↵oharboe2009-07-221-0/+2
| | | | | | reset_config command was removed from pxa270.cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@2557 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> split EK board support outoharboe2009-07-101-0/+17
| | | | | | from the target CPU support . git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* bitrot: fix numerous syntax errors oharboe2009-07-061-8/+6
| | | | | | added correct jtag device id git-svn-id: svn://svn.berlios.de/openocd/trunk@2467 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove vim editor commands from TCL files.zwelch2009-07-022-4/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2455 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-07-021-5/+4
| | | | | | | | | | | | | | | | Prepare the DaVinci PLL code to support the version 0x0E module used in newer chips (e.g. dm365): rename the original code so it's specific to version 0x02 PLL modules, and update the dm355evm code to use that new name. Fix two minor bugs in that version 2 code: sysclk3 setup used the sysclk2 divider address (affecting video processing on dm355, no worry for now) and sysclk2 setup had a syntax error. Also minor fixups to dm355evm, mostly to permit use of RTCK. git-svn-id: svn://svn.berlios.de/openocd/trunk@2447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add svn:eol-style native property to TCL files that are missing it.zwelch2009-06-301-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2433 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove executable bits from at91sam3 configuration files.zwelch2009-06-301-0/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2432 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* freddie_chopin@op.pl fix handling of workareaoharboe2009-06-301-6/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2431 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Marcel Jost <marcel.jost@bfh.ch>:zwelch2009-06-301-0/+18
| | | | | | | | | | This patch adds support for the Luminary Micro LM3S9B90 target and LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a new ft2232 layout called "luminary_icdi". git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Kevin Bortis <stm32@bortis.ch> fix worksizeoharboe2009-06-291-0/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2419 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-291-2/+85
| | | | | | | | | | | | | | | | | Improve the PXA255 target config: move all that board-specific setup to the pxa255_sst board.cfg, to which it evidently belongs (it's the only PXA255 board now included). Provide the PXA255 JTAG id from Intel docs, and add a comment about how this chip is now EOL'd (last orders taken). Note that I still can't get my old PXA255 board to work. There's something broken in the reset sequence, which is preventing the TAP from coming up at all. Old mailing list posts suggest this is a longstanding bug... git-svn-id: svn://svn.berlios.de/openocd/trunk@2416 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add support for ATMEL AT91SAM3U - CortexM3 Familyduane2009-06-241-0/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2383 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Make the Hitex STM32-PerformanceStick ↵oharboe2009-06-221-44/+3
| | | | | | | | board config behave better: source the STM32 target config instead of using a private clone git-svn-id: svn://svn.berlios.de/openocd/trunk@2352 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-171-10/+5
| | | | | | | | | | | | | | | | | | | | | Update the Beagle setup: - OMAP3530 updates: * split ICEpick TAP enable support to its own file, for reuse and eventually for storing other utility code like emulation reset * clean up, including labeling the tap as for DAP not for the Cortex-A8 and making endianness non-variable * add a few FIXMEs - BeagleBoard cleanup: there's no SRST, "endstate" is gone, etc I'm not sure I'd say it's further than "barely limping" just yet. Key issues remain lack of Cortex-A8 support, and more complete support for resetting. git-svn-id: svn://svn.berlios.de/openocd/trunk@2267 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-171-40/+4
| | | | | | | | Fix for a goofy "board" config ... reuse target/pxa270.cfg instead of using a private copy. git-svn-id: svn://svn.berlios.de/openocd/trunk@2266 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-151-0/+14
| | | | | | | | | | | | | | | Add another board ... OMAP2420 "H4" board. This won't be very widely used with OpenOCD, but with mainline support in both U-Boot and Linux it at least makes for a more complete set (and another testcase). This is incomplete support in several respects. The ARM11 support is not very deep yet; most registers aren't available, and the ETM can't be hooked up. Plus, there's no script for OMAP-specific stuff like setting up the SDRAM controller. Eventually the same NAND controller driver should work with OMAP2 and OMAP3. git-svn-id: svn://svn.berlios.de/openocd/trunk@2242 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-101-3/+1
| | | | | | | | | Tweak the csb337 code so that it doesn't enable alignment traps when it completes the "reset init" sequence. It turns out that the current CFI code reliably triggers such traps. git-svn-id: svn://svn.berlios.de/openocd/trunk@2179 b42882b7-edfa-0310-969c-e2dbd0fdcd60