summaryrefslogtreecommitdiff
path: root/tcl
Commit message (Collapse)AuthorAgeFilesLines
...
* David Brownell <david-b@pacbell.net>:zwelch2009-06-171-18/+31
| | | | | | | | | | | | | | | | DM6446 config updates: - List two more TAPs, as disabled, mostly for doc purposes - Included basic ICEpick support, still disabled by default - Shorten line lengths - Use $_TARGETNAME to configure the ETM and ETB - This ARM core don't support endianness overriding For now, boards that can't jumper EMU0/EMU1 will need to tweak a variable's setting. git-svn-id: svn://svn.berlios.de/openocd/trunk@2265 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-152-0/+75
| | | | | | | | | | | | | | | Add another board ... OMAP2420 "H4" board. This won't be very widely used with OpenOCD, but with mainline support in both U-Boot and Linux it at least makes for a more complete set (and another testcase). This is incomplete support in several respects. The ARM11 support is not very deep yet; most registers aren't available, and the ETM can't be hooked up. Plus, there's no script for OMAP-specific stuff like setting up the SDRAM controller. Eventually the same NAND controller driver should work with OMAP2 and OMAP3. git-svn-id: svn://svn.berlios.de/openocd/trunk@2242 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-101-3/+1
| | | | | | | | | Tweak the csb337 code so that it doesn't enable alignment traps when it completes the "reset init" sequence. It turns out that the current CFI code reliably triggers such traps. git-svn-id: svn://svn.berlios.de/openocd/trunk@2179 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Revert changes from r2134 that snuck into the commit. Mea culpa.zwelch2009-06-091-45/+21
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-092-21/+163
| | | | | | | | | | | | | | | | Add configuration for an old AT91rm9200 board, the Cogent CSB 337. Worth noting from the OpenOCD perspective: - It got a real hardware trace port connector; wired up here as much as we can, lacking inexpensive trace-aware dongles. - This is the first in-tree use of the "arm920t cp15" command. It adjusts the CPU clocking and enables i-cache, which gives more than 4x speedup after booting Linux; it's visible even just running U-Boot. git-svn-id: svn://svn.berlios.de/openocd/trunk@2134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> target/at91rm9200.cfg cleanupoharboe2009-06-051-18/+16
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2075 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-011-0/+28
| | | | | | | | | This is the missing half of the r1974 patch: OSK5912 board support, which was split out from the omap5912 target config. git-svn-id: svn://svn.berlios.de/openocd/trunk@1985 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-06-011-20/+14
| | | | | | | | | | | | | | | | | | | | | | | | Split out OSK5912 board support from the omap5912 target config, and make it pass sanity checks on my (Rev C/original) hardware: - Fix syntax error ("-irlen" not "irlen") - Provide real TAP ids for the ARM926ejs and the C55x dsp - Label both CPUs appropriately (DSP, ARM) - List both flash chips The scan chain looks like this (note truncated DSP instruction code): TapName | Enabled | IdCode Expected IrLen IrCap IrMask Instr ---|--------------------|---------|------------|------------|------|------|------|--------- 0 | omap5912.dsp | Y | 0x03df1d81 | 0x03df1d81 | 0x26 | 0x00 | 0x00 | 0xffffffff 1 | omap5912.arm | Y | 0x0692602f | 0x0692602f | 0x04 | 0x01 | 0x00 | 0x0c 2 | omap5912.unknown | Y | 0x00000000 | 0x00000000 | 0x08 | 0x00 | 0x00 | 0xff I still don't know what that third TAP is; maybe an early version of an ICEpick JTAG router. git-svn-id: svn://svn.berlios.de/openocd/trunk@1974 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add support for cortino jtag interfacentfreak2009-05-271-0/+11
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1925 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Move TCL script files -- Step 2 of 2:zwelch2009-05-27133-0/+5629
- Move src/tcl to tcl/. - Update top Makefile.am to use new path name. git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60