summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLaurent Charpentier <laurent_pubs@yahoo.com>2011-06-06 11:51:38 +0200
committerØyvind Harboe <oyvind@fierce.(none)>2011-06-08 07:19:39 +0200
commit01c0ffe98f87e35f21b8f392b6432d4190d1eb43 (patch)
tree73f48d0780079df1b3b747abd799ad7fe61fc1a3
parent33f9bec9ec5fe370e7a1398c53a7e97409f669ba (diff)
downloadopenocd_libswd-01c0ffe98f87e35f21b8f392b6432d4190d1eb43.tar.gz
openocd_libswd-01c0ffe98f87e35f21b8f392b6432d4190d1eb43.tar.bz2
openocd_libswd-01c0ffe98f87e35f21b8f392b6432d4190d1eb43.tar.xz
openocd_libswd-01c0ffe98f87e35f21b8f392b6432d4190d1eb43.zip
Added configuration file for stm32f2xxx.
-rw-r--r--tcl/target/stm32f2xxx.cfg56
1 files changed, 56 insertions, 0 deletions
diff --git a/tcl/target/stm32f2xxx.cfg b/tcl/target/stm32f2xxx.cfg
new file mode 100644
index 00000000..9ebc00f3
--- /dev/null
+++ b/tcl/target/stm32f2xxx.cfg
@@ -0,0 +1,56 @@
+# script for stm32f2xxx
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME stm32f2xxx
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 64kB
+if { [info exists WORKAREASIZE] } {
+ set _WORKAREASIZE $WORKAREASIZE
+} else {
+ set _WORKAREASIZE 0x10000
+}
+
+# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
+jtag_khz 1000
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#jtag scan chain
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # See STM Document RM0033
+ # Section 32.6.3 - corresponds to Cortex-M3 r2p0
+ set _CPUTAPID 0x4ba00477
+}
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+if { [info exists BSTAPID ] } {
+ set _BSTAPID $BSTAPID
+} else {
+ # See STM Document RM0033
+ # Section 32.6.2
+ #
+ set _BSTAPID 0x06411041
+}
+jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f2xxx 0 0 0 0 $_TARGETNAME
+