Version 0.4.0-dev

Add "-dev" tag.  Update minor version number.
Archive old NEWS file, start a new one.

3 files changed, 87 insertions, 64 deletions

diff --git a/NEWS b/NEWS
index 80e8823c..d0f5d701 100644
--- a/NEWS
+++ b/NEWS
@@ -1,74 +1,15 @@
-This file should include highlights of the changes made in the
-OpenOCD openocd-0.3.0 source archive release.  See the repository
-history for details about what changed, including bugfixes and
-other issues not mentioned here.
+This file includes highlights of the changes made in the
+OpenOCD 0.4.0 source archive release.  See the repository
+history for details about what changed, including bugfixes
+and other issues not mentioned here.
 
 JTAG Layer:
-    FT2232H (high speed USB) support doesn't need separate configuration
-    New FT2232H JTAG adapters:  Amontec, Olimex, Signalyzer
-    New reset_config options for SRST gating the JTAG clock (or not)
-    TAP declaration no longer requires ircapture and mask attributes
-    Scan chain setup should be more robust, with better diagnostics
-    New TAP events:
-	"post-reset" for TAP-invariant setup code (TAPs not usable yet)
-	"setup" for use once TAPs are addressable (e.g. with ICEpick)
-    Overridable Tcl "init_reset" and "jtag_init" procedures
-    Simple "autoprobe" mechanism to help simplify server setup
-
 Boundary Scan:
-    SVF bugfixes ... parsing fixes, better STATE switch conformance
-    XSVF bugfixes ... be more correct, handle Xilinx tool output
-
 Target Layer:
-    Warn on use of obsolete numeric target IDs
-    New commands for use with Cortex-M3 processors:
-	"cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
-	"cortex_m3 vector_catch" ... traps certain hardware faults
-		without tying up breakpoint resources
-    If you're willing to help debug it
-	VERY EARLY Cortex-A8 and ARMv7A support
-	Updated BeagleBoard.org hardware support
-	you may need to explicitly "reset" after connect-to-Beagle
-    New commands for use with XScale processors: "xscale vector_table"
-    ARM
-	bugfixes to single-stepping Thumb code
-	ETM: unavailable registers are not listed
-	ETB, ETM: report actual hardware status
-    ARM9
-	name change:  "arm9 vector_catch" not "arm9tdmi vector_catch"
-    ARM11
-	single stepping support for i.MX31
-	bugfix for missing "arm11" prefix on "arm11 memwrite ..."
-    GDB support
-	gdb_attach command is gone
-
 Flash Layer:
-    The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
-    New drivers:
-	lpc2900, for NXP LPC2900 chips (ARM968 based)
-	mx3_nand, for imx31
-    New "last" flag for NOR "flash erase_sector" and "flash protect"
-    The "nand erase N" command now erases all of bank N
-    Speed up davinci_nand by about 3x
-
 Board, Target, and Interface Configuration Scripts:
-    Amontec JTAGkey2 support
-    Cleanup and additions for the TI/Luminary Stellaris scripts
-    LPC1768 target (and flash) support
-	Keil MCB1700 eval board
-    Samsung s3c2450
-	Mini2440 board
-    Numeric TAP and Target identifiers now trigger warnings
-    PXA255 partially enumerates
-
 Documentation:
-    Capture more debugging and setup advice
-    Notes on target source code changes that may help debugging
-
 Build and Release:
-    Repository moved from SVN at Berlios to GIT at SourceForge
-    Clean builds on (32-bit) Cygwin
-    Clean builds on 64-bit MinGW
 
 For more details about what has changed since the last release,
 see the git repository history.  With gitweb, you can browse that
diff --git a/NEWS-0.3.0 b/NEWS-0.3.0
new file mode 100644
index 00000000..80e8823c
--- /dev/null
+++ b/NEWS-0.3.0
@@ -0,0 +1,82 @@
+This file should include highlights of the changes made in the
+OpenOCD openocd-0.3.0 source archive release.  See the repository
+history for details about what changed, including bugfixes and
+other issues not mentioned here.
+
+JTAG Layer:
+    FT2232H (high speed USB) support doesn't need separate configuration
+    New FT2232H JTAG adapters:  Amontec, Olimex, Signalyzer
+    New reset_config options for SRST gating the JTAG clock (or not)
+    TAP declaration no longer requires ircapture and mask attributes
+    Scan chain setup should be more robust, with better diagnostics
+    New TAP events:
+	"post-reset" for TAP-invariant setup code (TAPs not usable yet)
+	"setup" for use once TAPs are addressable (e.g. with ICEpick)
+    Overridable Tcl "init_reset" and "jtag_init" procedures
+    Simple "autoprobe" mechanism to help simplify server setup
+
+Boundary Scan:
+    SVF bugfixes ... parsing fixes, better STATE switch conformance
+    XSVF bugfixes ... be more correct, handle Xilinx tool output
+
+Target Layer:
+    Warn on use of obsolete numeric target IDs
+    New commands for use with Cortex-M3 processors:
+	"cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
+	"cortex_m3 vector_catch" ... traps certain hardware faults
+		without tying up breakpoint resources
+    If you're willing to help debug it
+	VERY EARLY Cortex-A8 and ARMv7A support
+	Updated BeagleBoard.org hardware support
+	you may need to explicitly "reset" after connect-to-Beagle
+    New commands for use with XScale processors: "xscale vector_table"
+    ARM
+	bugfixes to single-stepping Thumb code
+	ETM: unavailable registers are not listed
+	ETB, ETM: report actual hardware status
+    ARM9
+	name change:  "arm9 vector_catch" not "arm9tdmi vector_catch"
+    ARM11
+	single stepping support for i.MX31
+	bugfix for missing "arm11" prefix on "arm11 memwrite ..."
+    GDB support
+	gdb_attach command is gone
+
+Flash Layer:
+    The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
+    New drivers:
+	lpc2900, for NXP LPC2900 chips (ARM968 based)
+	mx3_nand, for imx31
+    New "last" flag for NOR "flash erase_sector" and "flash protect"
+    The "nand erase N" command now erases all of bank N
+    Speed up davinci_nand by about 3x
+
+Board, Target, and Interface Configuration Scripts:
+    Amontec JTAGkey2 support
+    Cleanup and additions for the TI/Luminary Stellaris scripts
+    LPC1768 target (and flash) support
+	Keil MCB1700 eval board
+    Samsung s3c2450
+	Mini2440 board
+    Numeric TAP and Target identifiers now trigger warnings
+    PXA255 partially enumerates
+
+Documentation:
+    Capture more debugging and setup advice
+    Notes on target source code changes that may help debugging
+
+Build and Release:
+    Repository moved from SVN at Berlios to GIT at SourceForge
+    Clean builds on (32-bit) Cygwin
+    Clean builds on 64-bit MinGW
+
+For more details about what has changed since the last release,
+see the git repository history.  With gitweb, you can browse that
+in various levels of detail.
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
+
+For more information about contributing test reports, bug fixes, or new
+features and device support, please read the new Developer Manual (or
+the BUGS and PATCHES files in the source archive).
diff --git a/configure.in b/configure.in
index 08212e8b..d7f8d476 100644
--- a/configure.in
+++ b/configure.in
@@ -1,5 +1,5 @@
 AC_PREREQ(2.60)
-AC_INIT([openocd], [0.3.0],
+AC_INIT([openocd], [0.4.0-dev],
   [OpenOCD Mailing List <openocd-development@lists.berlios.de>])
 AC_CONFIG_SRCDIR([src/openocd.c])