summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authoroharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2008-09-01 07:24:14 +0000
committeroharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2008-09-01 07:24:14 +0000
commit5ac8036b7fdaa32d44fb756f46f60d8de33e3a50 (patch)
tree66277e10b3f84552d749789531a89c4672c1b561
parentef1cfb23947bd32798077c6abb5c25a049460ae9 (diff)
downloadopenocd_libswd-5ac8036b7fdaa32d44fb756f46f60d8de33e3a50.tar.gz
openocd_libswd-5ac8036b7fdaa32d44fb756f46f60d8de33e3a50.tar.bz2
openocd_libswd-5ac8036b7fdaa32d44fb756f46f60d8de33e3a50.tar.xz
openocd_libswd-5ac8036b7fdaa32d44fb756f46f60d8de33e3a50.zip
Removed target->reset_mode, no longer used
git-svn-id: svn://svn.berlios.de/openocd/trunk@976 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-rw-r--r--doc/README_TARGET_COMMAND.txt427
-rw-r--r--src/target/target.c164
-rw-r--r--src/target/target.h1
3 files changed, 496 insertions, 96 deletions
diff --git a/doc/README_TARGET_COMMAND.txt b/doc/README_TARGET_COMMAND.txt
new file mode 100644
index 00000000..b02e4881
--- /dev/null
+++ b/doc/README_TARGET_COMMAND.txt
@@ -0,0 +1,427 @@
+To be incorporated in openocd.texi...
+
+
+==
+Current as of Aug 30, 2008 - Duane Ellis
+==
+
+===================================================
+Overview - History
+
+ Pre "tcl" - many commands in openocd where implimented as C
+ functions. Post "tcl" (Jim-Tcl to be more exact, June 2008 ...) TCL
+ became a bigger part of OpenOCD.
+
+One of the biggest changes is the introduction of 'target specific'
+commands. When every you create a target, a special command name is
+created specifically for that target.
+
+ For example - in Tcl/Tk - if you create a button (or any other
+ screen object) you can specify various "button configuration
+ parameters". One of those parameters is the "object cmd/name"
+ [ In TK - this is refered to as the object path ]. Later you
+ can use that 'path' as a command to modify the button, for
+ example to make it "grey", or change the color.
+
+In effect, the "path" function is an 'object oriented command'
+
+The TCL change in OpenOCD follows the same principle, you create a
+target, and a specific "targetname" command is created.
+
+There are two methods of creating a target.
+
+ (1) Depricated: Using the old syntax Target names are autogenerated
+ as: "target0", "target1" etc..
+
+ (2) Using the new syntax, you can specify the name of the target.
+
+As most users will have a single JTAG target, and by default the
+command name will probably default to "target0", thus for reasons of
+simplicity the instructions below use the name 'target0'
+
+Overview - History *END*
+==================================================
+
+OpenOCD has the following 'target' or 'target-like' commands.
+
+(1) targets -(plural) lists all known targets and a little bit of
+ information about each target, most importantly the target
+ *COMMAND*NAME* (it also lists the target number)
+
+(2) target -(singular) used to create, configure list, etc the targets
+
+(3) target0 - the command object for the first target.
+ Unless you specified another name.
+
+===================================================
+
+The "targets" (plural, 1 above) command has 2 functions.
+
+With a parameter, you can change the current command line target.
+
+ NOTE: "with a parameter" is really only useful with 'multiple
+ jtag targets' not something you normally encounter (ie: If you
+ had 2 arm chips - sharing the same JTAG chain)
+
+ # using a target name..
+ (gdb) mon targets target0
+ # or a target by number.
+ (gdb) mon targets 3
+
+Or - plain, without any parameter lists targets, for example:
+
+ (gdb) mon targets
+ CmdName Type Endian ChainPos State
+ -- ---------- ---------- ---------- -------- ----------
+ 0: target0 arm7tdmi little 0 halted
+
+This shows:
+ (a) in this example, a single target
+ (b) target number 0 (1st column)
+ (c) the 'object name' is target0 (the default name)
+ (d) it is an arm7tdmi
+ (e) little endian
+ (f) The position in the JTAG chain
+ (g) and is currently halted.
+
+====================================================
+
+The "target" (singular, 2 above) command has the following options:
+
+ target create CMDNAME TYPE ... config options ...
+ argv[0] = 'target'
+ argv[1] = 'create'
+ argv[2] = the 'object command'
+ (normally, target0, see (3) above)
+ argv[3] = the target type, ie: arm7tdmi
+ argv[4..N] = configuration parameters
+
+ target types
+ Lists all supported target types.
+ ie: arm7tdmi, xscale, fericon, cortex-m3
+
+ The result TCL List of all known target types (and is human
+ readable)
+
+ target names
+
+ Returns a TCL list of all known target commands (and is
+ human readable)
+
+ Example:
+ foreach t [target names] {
+ puts [format "Target: %s\n" $t]
+ }
+
+
+ target current
+
+ Returns the TCL command name of the current target.
+
+ Example:
+ set ct [target current]
+ set t [$ct cget -type]
+
+ puts "Current target name is: $ct, and is a: $t"
+
+
+ target number <VALUE>
+
+ Returns the TCL command name of the specified target.
+ For example
+
+ set thename [target number $x]
+ puts [format "Target %d is: %s\n" $x $thename]
+
+ For instance, assuming the defaults
+
+ target number 0
+
+ Would return 'target0' (or whatever you called it)
+
+ target count
+
+ Returns the larget+1 target number.
+ For example:
+
+ set c [target count]
+ for { set x 0 } { $x < $c } { incr x } {
+ # Assuming you have this function..
+ print_target_details $x
+ }
+
+====================================================
+
+"target0" - (#3 above) the "Target Object" command.
+
+ Once a target is 'created' a command object by that targets name is
+ created, for example
+
+ target create BiGRed arm7tdmi -endian little -chain-position 3
+
+Would create a [case sensative] "command" BiGRed
+
+If you use the old [deprecated] syntax, the name is automatically
+generated and is in the form:
+
+ target0, target1, target2, target3, .... etc.
+
+====================================================
+
+** Target CREATE, CONFIGURE and CGET options **
+
+The commands:
+
+ target create CMDNAME TYPE [configure-options]
+ CMDNAME configure [configure-options]
+ CMDNAME cget [configure-options]
+
+In the 'create' case, one is creating the target and can specify any
+number of configuration parameters.
+
+In the 'CMDNAME cget' case, the goal is to query the target for a
+specific configuration option.
+
+In the 'CMDNAME configure' case, one can change the setting.
+[Not all things can, or should be changed]
+
+In the above, the "default" name target0 is 'target0'
+
+Example:
+
+ From the (gdb) prompt, one can type this:
+
+ (gdb) mon target0 configure -endian big
+
+ And change target0 to 'big-endian'. This is a contrived example,
+ specifically for this document - don't expect changing endian
+ 'mid-operation' to work you should set the endian at creation.
+
+Known options [30/august/2008] are:
+
+[Manditory 'create' Options]
+ -type arm7tdmi|arm720|etc ...
+ -chain-position NUMBER
+ -endian ENDIAN
+
+Optional
+
+ -event EVENTNAME "tcl-action"
+ -reset RESETACTION
+ -work-area-virt ADDR
+ -work-area-phys ADDR
+ -work-area-size ADDR
+ -work-area-backup BOOLEAN
+
+[Hint: To get a list of avaialable options, try this]
+
+ (gdb) mon target0 cget -BLAHBLAHBLAH
+
+ the abov causes an error - and a helpful list of valid options.
+
+==================================================
+** Example Target Configure Query **
+
+One can query any of the above options at run time, for example:
+
+ (gdb) mon target0 cget -OPTION [param]
+
+Example TCL script
+
+ # For all targets...
+ set c [target count]
+ for { set x 0 } { $x < $c } { incr x ] {
+ set n [target number $x]
+ set t [$n cget -type]
+ set e [$n cget -endian]
+ puts [format "%d: %s, %s, endian: %s\n" $x $n $t $n]
+ }
+
+Might produce:
+ 0: pic32chip, mips_m4k, endain: little
+ 1: arm7, arm7tdmi, endian: big
+ 2: blackfin, bf534, endian: little
+
+Notice the above example is not target0, target1, target2 Why? Because
+in this contrived multi-target example - more human understandable
+target names might be helpful.
+
+For example these two are the same:
+
+ (gdb) mon blackfin configure -event FOO {puts "Hi mom"}
+
+or:
+ (gdb) mon [target number 2] configure -event FOO {puts "Hi mom"}
+
+In the second case, we use [] to get the command name of target #2, in
+this contrived example - it is "blackfin"
+
+====================================================
+** TWO Important Configure Options Are: **
+
+Two important configuration options are:
+
+ "-event" and "-reset"
+
+The "-reset" option specifies what should happen when the chip is
+reset, for example should it 'halt', 're-init', or what.
+
+The "-event" option less you specifiy a TCL command to occur when a
+specific event occurs.
+
+====================================================
+** Target Events * Overview **
+
+At various points in time - certian 'target' events happen. You can
+create a custom event action to occur at that time.
+
+For example - after reset, the PLLs and CLOCKs may need to be
+reconfigured, or perhaps the SDRAM needs to be re-initialized
+
+Often the easiest way to do that is to create a simple script file
+containing the series of (mww [poke memory]) commands you would type
+by hand, to reconfigure the target clocks. You could specify the
+"event action" like this:
+
+ (gdb) mon target0 configure -event reset-init "script cfg.clocks"
+
+In the above example, when the event "reset-init" occurs, the
+"action-string" will be evaluated as if you typed it at the console
+
+Option1 -
+
+ The simple approach (above) is to create a script file with
+ lots of "mww" (memory write word) commands to configure your
+ targets clocks and/or external memory.
+
+Option2 -
+
+ You can instead create a fancy Tcl procedure and invoke that
+ procedure instead of sourcing a file.
+
+ [Infact, "script" is a TCL procedure that loads a file]
+
+==================================================
+
+** Target Events * Details **
+
+There are many events one could use, to get a current list of events
+type the following invalid command, you'll get a helpful "runtime
+error" message, see below: [list valid as of 30/august/2008]
+
+ (gdb) mon target0 cget -event FAFA
+
+Runtime error, file "../../../openocd23/src/helper/command.c", line 433:
+ -event: Unknown: FAFA, try one of: old-pre_reset,
+ old-gdb_program_config, old-post_reset, halted,
+ resumed, resume-start, resume-end, reset-start,
+ reset-assert-pre, reset-assert-post,
+ reset-deassert-pre, reset-deassert-post,
+ reset-halt-pre, reset-halt-post, reset-wait-pre,
+ reset-wait-post, reset-init, reset-end,
+ examine-start, examine-end, debug-halted,
+ debug-resumed, gdb-attach, gdb-detach,
+ gdb-flash-write-start, gdb-flash-write-end,
+ gdb-flash-erase-start, gdb-flash-erase-end,
+ resume-start, resume-ok, or resume-end
+
+NOTE:
+
+ The event-names "old-*" are deprecated and exist only to help old
+ scripts continue to function, and the old "target_script" command
+ to work. Please do not rely on them.
+
+These are some other important names.
+
+ gdb-flash-erase-start
+ gdb-flash-erase-end
+ gdb-flash-write-start
+ gdb-flash-write-end
+
+ These occur when GDB/OpenOCD attempts to erase & program the FLASH
+ chip via GDB.
+
+ For example - some PCBs may have a simple GPIO pin that acts like
+ a "flash write protect" you might need to write a script that
+ disables "write protect"
+
+==================================================
+
+** How to get a list of current event actions **
+
+To get a list of current 'event actions', type the following command:
+
+ (gdb) mon target0 eventlist
+
+ Event actions for target (0) target0
+
+ Event | Body
+ ------------------------- | ----------------------------------------
+ old-post_reset | script event/sam7x256_reset.script
+ ***END***
+
+Here is a simple example for all targets:
+
+ (gdb) mon foreach x [target names] { $x eventlist }
+
+The above uses some TCL tricks:
+
+ (a) foreach VARIABLE LIST BODY
+
+ (b) to generate the list, we use [target names]
+
+ (c) the BODY, contains $x - the loop variable
+ and expands to the target specific name
+
+====================================================
+
+Recalling the earlier discussion - the "object command" there are
+other things you can do besides "configure" the target.
+
+Note: Many of these commands exist as "global" commands, and they also
+exist as target specific commands.
+
+For example, the "mww" (memory write word) operates on the current target
+if you have more then 1 target, you must switch
+
+In contrast to the normal commands, these commands operate on the
+specific target. For example, the command "mww" writes data to the
+*current* command line target.
+
+Often, you have only a single target - but if you have multiple
+targets (ie: a PIC32 and an at91sam7 - your reset-init scripts might
+get a bit more complicated, ie: you must specify which of the two
+chips you want to write to. Writing 'pic32' clock configuration to an
+at91sam7 does not work)
+
+The commands are: [as of 30/august/2008]
+
+ TNAME mww ADDRESS VALUE
+ TNAME mwh ADDRESS VALUE
+ TNAME mwb ADDRESS VALUE
+ Write(poke): 32, 16, 8bit values to memory.
+
+ TNAME mdw ADDRESS VALUE
+ TNAME mdh ADDRESS VALUE
+ TNAME mdb ADDRESS VALUE
+ Human 'hexdump' with ascii 32, 16, 8bit values
+
+ TNAME mem2array [see mem2array command]
+ TNAME array2mem [see array2mem command]
+
+ TNAME curstate
+ Returns the current state of the target.
+
+
+ TNAME examine
+ See 'advanced target reset'
+ TNAME poll
+ See 'advanced target reset'
+ TNAME reset assert
+ See 'advanced target reset'
+ TNAME reset deassert
+ See 'advanced target reset'
+ TNAME halt
+ See 'advanced target reset'
+ TNAME waitstate STATENAME
+ See 'advanced target reset'
diff --git a/src/target/target.c b/src/target/target.c
index 08a0505f..ee65147c 100644
--- a/src/target/target.c
+++ b/src/target/target.c
@@ -160,7 +160,7 @@ const Jim_Nvp nvp_target_event[] = {
{ .value = TARGET_EVENT_OLD_gdb_program_config , .name = "old-gdb_program_config" },
{ .value = TARGET_EVENT_OLD_post_reset , .name = "old-post_reset" },
{ .value = TARGET_EVENT_OLD_pre_resume , .name = "old-pre_resume" },
-
+
{ .value = TARGET_EVENT_HALTED, .name = "halted" },
{ .value = TARGET_EVENT_RESUMED, .name = "resumed" },
@@ -188,7 +188,7 @@ const Jim_Nvp nvp_target_event[] = {
{ .value = TARGET_EVENT_EXAMINE_START, .name = "examine-start" },
{ .value = TARGET_EVENT_EXAMINE_START, .name = "examine-end" },
-
+
{ .value = TARGET_EVENT_DEBUG_HALTED, .name = "debug-halted" },
{ .value = TARGET_EVENT_DEBUG_RESUMED, .name = "debug-resumed" },
@@ -342,7 +342,7 @@ target_t* get_target_by_num(int num)
while (target){
if( target->target_number == num ){
return target;
- }
+ }
target = target->next;
}
@@ -758,8 +758,8 @@ int target_call_event_callbacks(target_t *target, enum target_event event)
target_event_callback_t *callback = target_event_callbacks;
target_event_callback_t *next_callback;
- LOG_DEBUG("target event %i (%s)",
- event,
+ LOG_DEBUG("target event %i (%s)",
+ event,
Jim_Nvp_value2name_simple( nvp_target_event, event )->name );
target_handle_event( target, event );
@@ -1000,7 +1000,7 @@ int target_arch_state(struct target_s *target)
return ERROR_OK;
}
- LOG_USER("target state: %s",
+ LOG_USER("target state: %s",
Jim_Nvp_value2name_simple(nvp_target_state,target->state)->name);
if (target->state!=TARGET_HALTED)
@@ -1394,18 +1394,18 @@ int handle_targets_command(struct command_context_s *cmd_ctx, char *cmd, char **
if( 0 == strcmp( args[0], target->cmd_name ) ){
/* MATCH */
goto Match;
- }
+ }
}
}
/* no match, try as number */
-
+
int num = strtoul(args[0], &cp, 0 );
if( *cp != 0 ){
/* then it was not a number */
command_print( cmd_ctx, "Target: %s unknown, try one of:\n", args[0] );
goto DumpTargets;
}
-
+
target = get_target_by_num( num );
if( target == NULL ){
command_print(cmd_ctx,"Target: %s is unknown, try one of:\n", args[0] );
@@ -1422,11 +1422,11 @@ int handle_targets_command(struct command_context_s *cmd_ctx, char *cmd, char **
while (target)
{
/* XX: abcdefghij abcdefghij abcdefghij abcdefghij */
- command_print(cmd_ctx, "%2d: %-10s %-10s %-10s %8d %s",
+ command_print(cmd_ctx, "%2d: %-10s %-10s %-10s %8d %s",
target->target_number,
target->cmd_name,
- target->type->name,
- Jim_Nvp_value2name_simple( nvp_target_endian, target->endianness )->name,
+ target->type->name,
+ Jim_Nvp_value2name_simple( nvp_target_endian, target->endianness )->name,
target->chain_position,
Jim_Nvp_value2name_simple( nvp_target_state, target->state )->name );
target = target->next;
@@ -1689,14 +1689,14 @@ int target_wait_state(target_t *target, enum target_state state, int ms)
if (once)
{
once=0;
- LOG_DEBUG("waiting for target %s...",
+ LOG_DEBUG("waiting for target %s...",
Jim_Nvp_value2name_simple(nvp_target_state,state)->name);
}
gettimeofday(&now, NULL);
if ((now.tv_sec > timeout.tv_sec) || ((now.tv_sec == timeout.tv_sec) && (now.tv_usec >= timeout.tv_usec)))
{
- LOG_ERROR("timed out while waiting for target %s",
+ LOG_ERROR("timed out while waiting for target %s",
Jim_Nvp_value2name_simple(nvp_target_state,state)->name);
return ERROR_FAIL;
}
@@ -2801,7 +2801,7 @@ static int jim_array2mem(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
command_context_t *context;
target_t *target;
-
+
context = Jim_GetAssocData(interp, "context");
if (context == NULL){
LOG_ERROR("array2mem: no command context");
@@ -2812,10 +2812,10 @@ static int jim_array2mem(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
LOG_ERROR("array2mem: no current target");
return JIM_ERR;
}
-
+
return target_array2mem( interp,target, argc, argv );
}
-
+
static int target_array2mem(Jim_Interp *interp, target_t *target, int argc, Jim_Obj *const *argv)
{
@@ -2955,7 +2955,7 @@ target_all_handle_event( enum target_event e )
target_t *target;
- LOG_DEBUG( "**all*targets: event: %d, %s",
+ LOG_DEBUG( "**all*targets: event: %d, %s",
e,
Jim_Nvp_value2name_simple( nvp_target_event, e )->name );
@@ -2990,7 +2990,7 @@ target_handle_event( target_t *target, enum target_event e )
teap = teap->next;
}
if( !done ){
- LOG_DEBUG( "event: %d %s - no action",
+ LOG_DEBUG( "event: %d %s - no action",
e,
Jim_Nvp_value2name_simple( nvp_target_event, e )->name );
}
@@ -2998,7 +2998,7 @@ target_handle_event( target_t *target, enum target_event e )
enum target_cfg_param {
TCFG_TYPE,
- TCFG_EVENT,
+ TCFG_EVENT,
TCFG_RESET,
TCFG_WORK_AREA_VIRT,
TCFG_WORK_AREA_PHYS,
@@ -3021,10 +3021,10 @@ static Jim_Nvp nvp_config_opts[] = {
{ .name = "-endian" , .value = TCFG_ENDIAN },
{ .name = "-variant", .value = TCFG_VARIANT },
{ .name = "-chain-position", .value = TCFG_CHAIN_POSITION },
-
+
{ .name = NULL, .value = -1 }
};
-
+
static int
target_configure( Jim_GetOptInfo *goi,
@@ -3093,7 +3093,7 @@ target_configure( Jim_GetOptInfo *goi,
if( goi->argc == 0 ){
Jim_WrongNumArgs( goi->interp, goi->argc, goi->argv, "-event ?event-name? ?EVENT-BODY?");
return JIM_ERR;
- }
+ }
} else {
if( goi->argc != 0 ){
Jim_WrongNumArgs(goi->interp, goi->argc, goi->argv, "-event ?event-name?");
@@ -3101,10 +3101,10 @@ target_configure( Jim_GetOptInfo *goi,
}
}
-
- {
+
+ {
target_event_action_t *teap;
-
+
teap = target->event_action;
/* replace existing? */
while( teap ){
@@ -3113,7 +3113,7 @@ target_configure( Jim_GetOptInfo *goi,
}
teap = teap->next;
}
-
+
if( goi->isconfigure ){
if( teap == NULL ){
/* create new */
@@ -3126,7 +3126,7 @@ target_configure( Jim_GetOptInfo *goi,
}
teap->body = Jim_DuplicateObj( goi->interp, o );
/*
- * FIXME:
+ * FIXME:
* Tcl/TK - "tk events" have a nice feature.
* See the "BIND" command.
* We should support that here.
@@ -3153,32 +3153,6 @@ target_configure( Jim_GetOptInfo *goi,
/* loop for more */
break;
- case TCFG_RESET:
- if( goi->isconfigure ){
- e = Jim_GetOpt_Nvp( goi, nvp_reset_modes, &n );
- if( e != JIM_OK ){
- Jim_GetOpt_NvpUnknown( goi, nvp_reset_modes, 1 );
- return e;
- }
- if( n->value == RESET_UNKNOWN ){
- Jim_SetResultString( interp, "'unknown' is not a valid selection",-1);
- return JIM_ERR;
- }
- target->reset_mode = n->value;
- } else {
- if( goi->argc != 0 ){
- goto no_params;
- }
- }
- n = Jim_Nvp_value2name_simple( nvp_reset_modes, target->reset_mode );
- if( n->name == NULL ){
- target->reset_mode = RESET_HALT;
- n = Jim_Nvp_value2name_simple( nvp_reset_modes, target->reset_mode );
- }
- Jim_SetResultString( goi->interp, n->name, -1 );
- /* loop for more */
- break;
-
case TCFG_WORK_AREA_VIRT:
if( goi->isconfigure ){
target_free_all_working_areas(target);
@@ -3191,11 +3165,11 @@ target_configure( Jim_GetOptInfo *goi,
if( goi->argc != 0 ){
goto no_params;
}
- }
+ }
Jim_SetResult( interp, Jim_NewIntObj( goi->interp, target->working_area_virt ) );
/* loop for more */
break;
-
+
case TCFG_WORK_AREA_PHYS:
if( goi->isconfigure ){
target_free_all_working_areas(target);
@@ -3208,7 +3182,7 @@ target_configure( Jim_GetOptInfo *goi,
if( goi->argc != 0 ){
goto no_params;
}
- }
+ }
Jim_SetResult( interp, Jim_NewIntObj( goi->interp, target->working_area_phys ) );
/* loop for more */
break;
@@ -3225,7 +3199,7 @@ target_configure( Jim_GetOptInfo *goi,
if( goi->argc != 0 ){
goto no_params;
}
- }
+ }
Jim_SetResult( interp, Jim_NewIntObj( goi->interp, target->working_area_size ) );
/* loop for more */
break;
@@ -3243,7 +3217,7 @@ target_configure( Jim_GetOptInfo *goi,
if( goi->argc != 0 ){
goto no_params;
}
- }
+ }
Jim_SetResult( interp, Jim_NewIntObj( goi->interp, target->working_area_size ) );
/* loop for more e*/
break;
@@ -3265,7 +3239,7 @@ target_configure( Jim_GetOptInfo *goi,
if( n->name == NULL ){
target->endianness = TARGET_LITTLE_ENDIAN;
n = Jim_Nvp_value2name_simple( nvp_target_endian, target->endianness );
- }
+ }
Jim_SetResultString( goi->interp, n->name, -1 );
/* loop for more */
break;
@@ -3287,7 +3261,7 @@ target_configure( Jim_GetOptInfo *goi,
if( goi->argc != 0 ){
goto no_params;
}
- }
+ }
Jim_SetResultString( goi->interp, target->variant,-1 );
/* loop for more */
break;
@@ -3304,7 +3278,7 @@ target_configure( Jim_GetOptInfo *goi,
if( goi->argc != 0 ){
goto no_params;
}
- }
+ }
Jim_SetResult( interp, Jim_NewIntObj( goi->interp, target->chain_position ) );
/* loop for more e*/
break;
@@ -3318,7 +3292,7 @@ target_configure( Jim_GetOptInfo *goi,
/** this is the 'tcl' handler for the target specific command */
static int
tcl_target_func( Jim_Interp *interp,
- int argc,
+ int argc,
Jim_Obj *const *argv )
{
Jim_GetOptInfo goi;
@@ -3334,12 +3308,12 @@ tcl_target_func( Jim_Interp *interp,
enum {
TS_CMD_CONFIGURE,
TS_CMD_CGET,
-
+
TS_CMD_MWW, TS_CMD_MWH, TS_CMD_MWB,
TS_CMD_MDW, TS_CMD_MDH, TS_CMD_MDB,
TS_CMD_MRW, TS_CMD_MRH, TS_CMD_MRB,
TS_CMD_MEM2ARRAY, TS_CMD_ARRAY2MEM,
- TS_CMD_EXAMINE,
+ TS_CMD_EXAMINE,
TS_CMD_POLL,
TS_CMD_RESET,
TS_CMD_HALT,
@@ -3347,7 +3321,7 @@ tcl_target_func( Jim_Interp *interp,
TS_CMD_EVENTLIST,
TS_CMD_CURSTATE,
};
-
+
static const Jim_Nvp target_options[] = {
{ .name = "configure", .value = TS_CMD_CONFIGURE },
{ .name = "cget", .value = TS_CMD_CGET },
@@ -3412,7 +3386,7 @@ tcl_target_func( Jim_Interp *interp,
* argv[2] = data
* argv[3] = optional count.
*/
-
+
if( (goi.argc == 3) || (goi.argc == 4) ){
/* all is well */
} else {
@@ -3420,7 +3394,7 @@ tcl_target_func( Jim_Interp *interp,
Jim_SetResult_sprintf( goi.interp, "expected: %s ADDR DATA [COUNT]", n->name );
return JIM_ERR;
}
-
+
e = Jim_GetOpt_Wide( &goi, &a );
if( e != JIM_OK ){
goto mwx_error;
@@ -3438,7 +3412,7 @@ tcl_target_func( Jim_Interp *interp,
} else {
c = 1;
}
-
+
switch( n->value ){
case TS_CMD_MWW:
target_buffer_set_u32( target, target_buf, b );
@@ -3515,7 +3489,7 @@ tcl_target_func( Jim_Interp *interp,
Jim_SetResult_sprintf( interp, "error reading target @ 0x%08lx", (int)(a) );
return JIM_ERR;
}
-
+
Jim_fprintf( interp, interp->cookie_stdout, "0x%08x ", (int)(a) );
switch( b ){
case 4:
@@ -3549,7 +3523,7 @@ tcl_target_func( Jim_Interp *interp,
}
/* ascii-ify the bytes */
for( x = 0 ; x < y ; x++ ){
- if( (target_buf[x] >= 0x20) &&
+ if( (target_buf[x] >= 0x20) &&
(target_buf[x] <= 0x7e) ){
/* good */
} else {
@@ -3633,7 +3607,7 @@ tcl_target_func( Jim_Interp *interp,
target->type->halt( target );
return JIM_OK;
case TS_CMD_WAITSTATE:
- // params: <name> statename timeoutmsecs
+ // params: <name> statename timeoutmsecs
if( goi.argc != 2 ){
Jim_SetResult_sprintf( goi.interp, "%s STATENAME TIMEOUTMSECS", n->name );
return JIM_ERR;
@@ -3650,7 +3624,7 @@ tcl_target_func( Jim_Interp *interp,
e = target_wait_state( target, n->value, a );
if( e == ERROR_OK ){
Jim_SetResult_sprintf( goi.interp,
- "target: %s wait %s fails %d",
+ "target: %s wait %s fails %d",
target->cmd_name,
n->name,
target_strerror_safe(e) );
@@ -3666,12 +3640,12 @@ tcl_target_func( Jim_Interp *interp,
target_event_action_t *teap;
teap = target->event_action;
command_print( cmd_ctx, "Event actions for target (%d) %s\n",
- target->target_number,
+ target->target_number,
target->cmd_name );
command_print( cmd_ctx, "%-25s | Body", "Event");
command_print( cmd_ctx, "------------------------- | ----------------------------------------");
while( teap ){
- command_print( cmd_ctx,
+ command_print( cmd_ctx,
"%-25s | %s",
Jim_Nvp_value2name_simple( nvp_target_event, teap->event )->name,
Jim_GetString( teap->body, NULL ) );
@@ -3685,7 +3659,7 @@ tcl_target_func( Jim_Interp *interp,
Jim_WrongNumArgs( goi.interp, 0, argv, "[no parameters]");
return JIM_ERR;
}
- Jim_SetResultString( goi.interp,
+ Jim_SetResultString( goi.interp,
Jim_Nvp_value2name_simple(nvp_target_state,target->state)->name,-1);
return JIM_OK;
}
@@ -3695,8 +3669,8 @@ tcl_target_func( Jim_Interp *interp,
static int
target_create( Jim_GetOptInfo *goi )
-{
-
+{
+
Jim_Obj *new_cmd;
Jim_Cmd *cmd;
const char *cp;
@@ -3721,7 +3695,7 @@ target_create( Jim_GetOptInfo *goi )
Jim_SetResult_sprintf(goi->interp, "Command/target: %s Exists", cp);
return JIM_ERR;
}
-
+
/* TYPE */
e = Jim_GetOpt_String( goi, &cp2, NULL );
cp = cp2;
@@ -3736,12 +3710,12 @@ target_create( Jim_GetOptInfo *goi )
Jim_SetResult_sprintf( goi->interp, "Unknown target type %s, try one of ", cp );
for( x = 0 ; target_types[x] ; x++ ){
if( target_types[x+1] ){
- Jim_AppendStrings( goi->interp,
+ Jim_AppendStrings( goi->interp,
Jim_GetResult(goi->interp),
target_types[x]->name,
", ", NULL);
} else {
- Jim_AppendStrings( goi->interp,
+ Jim_AppendStrings( goi->interp,
Jim_GetResult(goi->interp),
" or ",
target_types[x]->name,NULL );
@@ -3750,7 +3724,7 @@ target_create( Jim_GetOptInfo *goi )
return JIM_ERR;
}
-
+
/* Create it */
target = calloc(1,sizeof(target_t));
/* set target number */
@@ -3760,7 +3734,7 @@ target_create( Jim_GetOptInfo *goi )
target->type = (target_type_t*)calloc(1,sizeof(target_type_t));
memcpy( target->type, target_types[x], sizeof(target_type_t));
-
+
/* will be set by "-endian" */
target->endianness = TARGET_ENDIAN_UNKNOWN;
@@ -3768,7 +3742,7 @@ target_create( Jim_GetOptInfo *goi )
target->working_area_size = 0x0;
target->working_areas = NULL;
target->backup_working_area = 0;
-
+
target->state = TARGET_UNKNOWN;
target->debug_reason = DBG_REASON_UNDEFINED;
target->reg_cache = NULL;
@@ -3776,7 +3750,7 @@ target_create( Jim_GetOptInfo *goi )
target->watchpoints = NULL;
target->next = NULL;
target->arch_info = NULL;
-
+
/* initialize trace information */
target->trace_info = malloc(sizeof(trace_t));
target->trace_info->num_trace_points = 0;
@@ -3786,7 +3760,7 @@ target_create( Jim_GetOptInfo *goi )
target->trace_info->trace_history = NULL;
target->trace_info->trace_history_pos = 0;
target->trace_info->trace_history_overflowed = 0;
-
+
target->dbgmsg = NULL;
target->dbg_msg_enabled = 0;
@@ -3858,9 +3832,9 @@ jim_target( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
TG_CMD_COUNT,
};
const char *target_cmds[] = {
- "create", "types", "names", "current", "number",
+ "create", "types", "names", "current", "number",
"count",
- NULL // terminate
+ NULL // terminate
};
LOG_DEBUG("Target command params:");
@@ -3887,9 +3861,9 @@ jim_target( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
/* YES IT IS OLD SYNTAX */
Jim_Obj *new_argv[10];
int new_argc;
-
- /* target_old_syntax
- *
+
+ /* target_old_syntax
+ *
* argv[0] typename (above)
* argv[1] endian
* argv[2] reset method, deprecated/ignored
@@ -3936,14 +3910,14 @@ jim_target( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
* argv[8] = -variant
* argv[9] = "somestring"
*/
-
+
/* don't let these be released */
for( x = 0 ; x < new_argc ; x++ ){
Jim_IncrRefCount( new_argv[x]);
}
/* call our self */
LOG_DEBUG("Target OLD SYNTAX - converted to new syntax");
-
+
r = jim_target( goi.interp, new_argc, new_argv );
/* release? these items */
@@ -3995,7 +3969,7 @@ jim_target( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
Jim_NewStringObj( goi.interp, target->cmd_name, -1 ) );
target = target->next;
}
- return JIM_OK;
+ return JIM_OK;
case TG_CMD_CREATE:
if( goi.argc < 3 ){
Jim_WrongNumArgs( goi.interp, goi.argc, goi.argv, "?name ... config options ...");
@@ -4027,7 +4001,7 @@ jim_target( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
Jim_WrongNumArgs( goi.interp, 0, goi.argv, "<no parameters>");
return JIM_ERR;
}
- Jim_SetResult( goi.interp,
+ Jim_SetResult( goi.interp,
Jim_NewIntObj( goi.interp, max_target_number()));
return JIM_OK;
}
diff --git a/src/target/target.h b/src/target/target.h
index c6f6bedd..f6f5177e 100644
--- a/src/target/target.h
+++ b/src/target/target.h
@@ -244,7 +244,6 @@ typedef struct target_s
int target_number; /* generaly, target index but may not be in order */
int chain_position; /* where on the jtag chain is this */
const char *variant; /* what varient of this chip is it? */
- enum target_reset_mode reset_mode; /* how should this target be reset */
target_event_action_t *event_action;
int reset_halt; /* attempt resetting the CPU into the halted mode? */