- fixed line endings with commands.tcl

- added svn props for newly added files

git-svn-id: svn://svn.berlios.de/openocd/trunk@749 b42882b7-edfa-0310-969c-e2dbd0fdcd60

2 files changed, 71 insertions, 71 deletions

diff --git a/src/target/target/at91eb40a.tcl b/src/target/target/at91eb40a.tcl
index 13ed0f82..de57995c 100644
--- a/src/target/target/at91eb40a.tcl
+++ b/src/target/target/at91eb40a.tcl
@@ -1,55 +1,55 @@
-#Script for AT91EB40a

-

-#Atmel ties SRST & TRST together, at which point it makes

-#no sense to use TRST, but use TMS instead.

-#

-#The annoying thing with tying SRST & TRST together is that

-#there is no way to halt the CPU *before and during* the

-#SRST reset, which means that the CPU will run a number

-#of cycles before it can be halted(as much as milliseconds).

-openocd {reset_config srst_only srst_pulls_trst}

- 

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-openocd {jtag_device 4 0x1 0xf 0xe}

-

-#target configuration

-openocd {target arm7tdmi little 0 arm7tdmi-s_r4}

-

-# speed up memory downloads

-openocd {arm7 fast_memory_access enable}

-openocd {arm7_9 dcc_downloads enable}

-

-#flash driver

-openocd {flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf}

-

-# required for usable performance. Used for lots of

-# other things than flash programming.

-openocd {working_area 0 0x00000000 0x20000 nobackup}

-

-#force hardware values - we're running out of flash more

-#often than not. The user can disable this in his

-#subsequent config script.

-openocd {arm7_9 force_hw_bkpts enable}

-

-set reset_count 0

-

-proc target_reset_0 {} {

-	global reset_count

-	# Reset script for AT91EB40a

-	openocd {reg cpsr 0x000000D3} 		

-	openocd {mww 0xFFE00020 0x1}

-	openocd {mww 0xFFE00024 0x00000000}  

-	openocd {mww 0xFFE00000 0x01002539} 

-	openocd {mww 0xFFFFF124 0xFFFFFFFF}  

-	openocd {mww 0xffff0010 0x100}

-	openocd {mww 0xffff0034 0x100}

-	set reset_count [expr $reset_count+1]

-	echo "Testing reset $reset_count !"

-}

-

-proc target_pre_reset_0 {} {

-	global reset_count

-	set reset_count [expr $reset_count+1]

-	echo "Testing pre_reset $reset_count !"

-}

+#Script for AT91EB40a
+
+#Atmel ties SRST & TRST together, at which point it makes
+#no sense to use TRST, but use TMS instead.
+#
+#The annoying thing with tying SRST & TRST together is that
+#there is no way to halt the CPU *before and during* the
+#SRST reset, which means that the CPU will run a number
+#of cycles before it can be halted(as much as milliseconds).
+openocd {reset_config srst_only srst_pulls_trst}
+ 
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+openocd {jtag_device 4 0x1 0xf 0xe}
+
+#target configuration
+openocd {target arm7tdmi little 0 arm7tdmi-s_r4}
+
+# speed up memory downloads
+openocd {arm7 fast_memory_access enable}
+openocd {arm7_9 dcc_downloads enable}
+
+#flash driver
+openocd {flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf}
+
+# required for usable performance. Used for lots of
+# other things than flash programming.
+openocd {working_area 0 0x00000000 0x20000 nobackup}
+
+#force hardware values - we're running out of flash more
+#often than not. The user can disable this in his
+#subsequent config script.
+openocd {arm7_9 force_hw_bkpts enable}
+
+set reset_count 0
+
+proc target_reset_0 {} {
+	global reset_count
+	# Reset script for AT91EB40a
+	openocd {reg cpsr 0x000000D3} 		
+	openocd {mww 0xFFE00020 0x1}
+	openocd {mww 0xFFE00024 0x00000000}  
+	openocd {mww 0xFFE00000 0x01002539} 
+	openocd {mww 0xFFFFF124 0xFFFFFFFF}  
+	openocd {mww 0xffff0010 0x100}
+	openocd {mww 0xffff0034 0x100}
+	set reset_count [expr $reset_count+1]
+	echo "Testing reset $reset_count !"
+}
+
+proc target_pre_reset_0 {} {
+	global reset_count
+	set reset_count [expr $reset_count+1]
+	echo "Testing pre_reset $reset_count !"
+}
diff --git a/src/tcl/commands.tcl b/src/tcl/commands.tcl
index 81f7b6f1..7d90f36c 100644
--- a/src/tcl/commands.tcl
+++ b/src/tcl/commands.tcl
@@ -1,18 +1,18 @@
-# implements Tcl procedures/functions

-proc peek {address} {

+# implements Tcl procedures/functions
+proc peek {address} {
 	return [openocd_throw "mdw $address"]
-}

-

-# Production command

-# FIX!!! need to figure out how to feed back relevant output

-# from e.g. "flash banks" command...

-proc board_produce {filename serialnumber} {

-	openocd "reset init"

-	openocd "flash write_image erase $filename [flash] bin"]]

-	openocd "verify_image $filename [flash] bin"]]

-	echo "Successfully ran production procedure"

-}

-

-proc board_test {} {

+}
+
+# Production command
+# FIX!!! need to figure out how to feed back relevant output
+# from e.g. "flash banks" command...
+proc board_produce {filename serialnumber} {
+	openocd "reset init"
+	openocd "flash write_image erase $filename [flash] bin"]]
+	openocd "verify_image $filename [flash] bin"]]
+	echo "Successfully ran production procedure"
+}
+
+proc board_test {} {
 	echo "Production test not implemented"
-}

+}