- add missing svn props from 1323 commit

git-svn-id: svn://svn.berlios.de/openocd/trunk@1324 b42882b7-edfa-0310-969c-e2dbd0fdcd60

7 files changed, 305 insertions, 305 deletions

diff --git a/src/target/board/imx31pdk.cfg b/src/target/board/imx31pdk.cfg
index c6c423ce..67233567 100644
--- a/src/target/board/imx31pdk.cfg
+++ b/src/target/board/imx31pdk.cfg
@@ -1,101 +1,101 @@
-# The IMX31PDK eval board has a single IMX31 chip

-source [find target/imx31.cfg]

-$_TARGETNAME configure -event gdb-attach { reset init }

-$_TARGETNAME configure -event reset-init { imx31pdk_init }

-

-proc imx31pdk_init { } {

-	# This setup puts RAM at 0x80000000

-

-	# reset the board correctly

-	reset run

-	reset halt

-

-	# ========================================

-	# Init CCM

-	# ========================================

-	mww 0x53FC0000 0x040

-	mww 0x53F80000 0x074B0B7D

-

-	sleep 100

-

-	# ========================================

-	# 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40

-	# ========================================

-	mww 0x53F80004 0xFF871D50

-	mww 0x53F80010 0x00271C1B

-

-	# ========================================

-	# Configure CPLD on CS5 

-	# ========================================

-	mww 0xb8002050 0x0000DCF6

-	mww 0xb8002054 0x444A4541

-	mww 0xb8002058 0x44443302

-

-	# ========================================

-	# SDCLK

-	# ========================================

-	mww 0x43FAC26C 0

-

-	# ========================================

-	# CAS

-	# ========================================

-	mww 0x43FAC270 0

-

-	# ========================================

-	# RAS

-	# ========================================

-	mww 0x43FAC274 0

-

-	# ========================================

-	# CS2 (CSD0)

-	# ========================================

-	mww 0x43FAC27C 0x1000

-

-	# ========================================

-	# DQM3

-	# ========================================

-	mww 0x43FAC284 0

-

-	# ========================================

-	# DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)

-	# ========================================

-	mww 0x43FAC288 0

-	mww 0x43FAC28C 0

-	mww 0x43FAC290 0

-	mww 0x43FAC294 0

-	mww 0x43FAC298 0

-	mww 0x43FAC29C 0

-	mww 0x43FAC2A0 0

-	mww 0x43FAC2A4 0

-	mww 0x43FAC2A8 0

-	mww 0x43FAC2AC 0

-	mww 0x43FAC2B0 0

-	mww 0x43FAC2B4 0

-	mww 0x43FAC2B8 0

-	mww 0x43FAC2BC 0

-	mww 0x43FAC2C0 0

-	mww 0x43FAC2C4 0

-	mww 0x43FAC2C8 0

-	mww 0x43FAC2CC 0

-	mww 0x43FAC2D0 0

-	mww 0x43FAC2D4 0

-	mww 0x43FAC2D8 0

-	mww 0x43FAC2DC 0

-

-	# ========================================

-	# Initialization script for 32 bit DDR on MX31 PDK

-	# ========================================

-	mww 0xB8001010 0x00000004

-	mww 0xB8001004 0x006ac73a

-	mww 0xB8001000 0x92100000

-	mww 0x80000f00 0x12344321

-	mww 0xB8001000 0xa2100000

-	mww 0x80000000 0x12344321

-	mww 0x80000000 0x12344321

-	mww 0xB8001000 0xb2100000

-	mwb 0x80000033 0xda

-	mwb 0x81000000 0xff

-	mww 0xB8001000 0x82226080

-	mww 0x80000000 0xDEADBEEF

-	mww 0xB8001010 0x0000000c

-}

+# The IMX31PDK eval board has a single IMX31 chip
+source [find target/imx31.cfg]
+$_TARGETNAME configure -event gdb-attach { reset init }
+$_TARGETNAME configure -event reset-init { imx31pdk_init }
+
+proc imx31pdk_init { } {
+	# This setup puts RAM at 0x80000000
+
+	# reset the board correctly
+	reset run
+	reset halt
+
+	# ========================================
+	# Init CCM
+	# ========================================
+	mww 0x53FC0000 0x040
+	mww 0x53F80000 0x074B0B7D
+
+	sleep 100
+
+	# ========================================
+	# 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
+	# ========================================
+	mww 0x53F80004 0xFF871D50
+	mww 0x53F80010 0x00271C1B
+
+	# ========================================
+	# Configure CPLD on CS5 
+	# ========================================
+	mww 0xb8002050 0x0000DCF6
+	mww 0xb8002054 0x444A4541
+	mww 0xb8002058 0x44443302
+
+	# ========================================
+	# SDCLK
+	# ========================================
+	mww 0x43FAC26C 0
+
+	# ========================================
+	# CAS
+	# ========================================
+	mww 0x43FAC270 0
+
+	# ========================================
+	# RAS
+	# ========================================
+	mww 0x43FAC274 0
+
+	# ========================================
+	# CS2 (CSD0)
+	# ========================================
+	mww 0x43FAC27C 0x1000
+
+	# ========================================
+	# DQM3
+	# ========================================
+	mww 0x43FAC284 0
+
+	# ========================================
+	# DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
+	# ========================================
+	mww 0x43FAC288 0
+	mww 0x43FAC28C 0
+	mww 0x43FAC290 0
+	mww 0x43FAC294 0
+	mww 0x43FAC298 0
+	mww 0x43FAC29C 0
+	mww 0x43FAC2A0 0
+	mww 0x43FAC2A4 0
+	mww 0x43FAC2A8 0
+	mww 0x43FAC2AC 0
+	mww 0x43FAC2B0 0
+	mww 0x43FAC2B4 0
+	mww 0x43FAC2B8 0
+	mww 0x43FAC2BC 0
+	mww 0x43FAC2C0 0
+	mww 0x43FAC2C4 0
+	mww 0x43FAC2C8 0
+	mww 0x43FAC2CC 0
+	mww 0x43FAC2D0 0
+	mww 0x43FAC2D4 0
+	mww 0x43FAC2D8 0
+	mww 0x43FAC2DC 0
+
+	# ========================================
+	# Initialization script for 32 bit DDR on MX31 PDK
+	# ========================================
+	mww 0xB8001010 0x00000004
+	mww 0xB8001004 0x006ac73a
+	mww 0xB8001000 0x92100000
+	mww 0x80000f00 0x12344321
+	mww 0xB8001000 0xa2100000
+	mww 0x80000000 0x12344321
+	mww 0x80000000 0x12344321
+	mww 0xB8001000 0xb2100000
+	mwb 0x80000033 0xda
+	mwb 0x81000000 0xff
+	mww 0xB8001000 0x82226080
+	mww 0x80000000 0xDEADBEEF
+	mww 0xB8001010 0x0000000c
+}
diff --git a/testing/examples/ledtest-imx27ads/Makefile b/testing/examples/ledtest-imx27ads/Makefile
index 42516492..4009c41b 100644
--- a/testing/examples/ledtest-imx27ads/Makefile
+++ b/testing/examples/ledtest-imx27ads/Makefile
@@ -1,42 +1,42 @@
-# This will make the test program for a Freescale iMX27 ADS Board with a 

-# FreeScale iMX27 CPU 

-

-PROC=arm

-TYPE=926ejs-linux

-LDSCRIPT=ldscript

-

-PATH:=/opt/freescale/usr/local/gcc-4.1.1-glibc-2.4-nptl-sf-1/arm-926ejs-linux/bin/:$(PATH)

-CC=$(PROC)-$(TYPE)-gcc

-AS=$(PROC)-$(TYPE)-as

-AR=$(PROC)-$(TYPE)-ar

-LD=$(PROC)-$(TYPE)-ld

-NM=$(PROC)-$(TYPE)-nm

-OBJDUMP=$(PROC)-$(TYPE)-objdump

-CFLAGS= -g -c -mcpu=arm920t

-

-all: test.elf

-

-# Make a little endian image:

-# In Eclipse, add the line :

-#    source gdbinit 

-# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox)

-# To start gdb from a window use : arm-elf-gdb --command=gdbinit

-test.elf: test.c Makefile ldscript crt0.S

-	$(CC) $(CFLAGS) -o crt0.o crt0.S

-	$(CC) $(CFLAGS) -o test.o test.c

-	$(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o 

-	$(NM) test.elf

-

-

-dump:

-	$(OBJDUMP) --all-headers test.elf

-

-dump_test:

-	$(OBJDUMP) --disassemble test.elf

-

-dump_full:

-	$(OBJDUMP) --full-contents test.elf

-

-clean:

-	-/bin/rm -f *.o *~ test.elf

-

+# This will make the test program for a Freescale iMX27 ADS Board with a 
+# FreeScale iMX27 CPU 
+
+PROC=arm
+TYPE=926ejs-linux
+LDSCRIPT=ldscript
+
+PATH:=/opt/freescale/usr/local/gcc-4.1.1-glibc-2.4-nptl-sf-1/arm-926ejs-linux/bin/:$(PATH)
+CC=$(PROC)-$(TYPE)-gcc
+AS=$(PROC)-$(TYPE)-as
+AR=$(PROC)-$(TYPE)-ar
+LD=$(PROC)-$(TYPE)-ld
+NM=$(PROC)-$(TYPE)-nm
+OBJDUMP=$(PROC)-$(TYPE)-objdump
+CFLAGS= -g -c -mcpu=arm920t
+
+all: test.elf
+
+# Make a little endian image:
+# In Eclipse, add the line :
+#    source gdbinit 
+# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox)
+# To start gdb from a window use : arm-elf-gdb --command=gdbinit
+test.elf: test.c Makefile ldscript crt0.S
+	$(CC) $(CFLAGS) -o crt0.o crt0.S
+	$(CC) $(CFLAGS) -o test.o test.c
+	$(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o 
+	$(NM) test.elf
+
+
+dump:
+	$(OBJDUMP) --all-headers test.elf
+
+dump_test:
+	$(OBJDUMP) --disassemble test.elf
+
+dump_full:
+	$(OBJDUMP) --full-contents test.elf
+
+clean:
+	-/bin/rm -f *.o *~ test.elf
+
diff --git a/testing/examples/ledtest-imx27ads/crt0.S b/testing/examples/ledtest-imx27ads/crt0.S
index 6c15be21..d7498814 100644
--- a/testing/examples/ledtest-imx27ads/crt0.S
+++ b/testing/examples/ledtest-imx27ads/crt0.S
@@ -1,47 +1,47 @@
-/* Sample initialization file */

-	

-	.extern	main

-	.extern	exit

-	

-/* .text is used instead of .section .text so it works with arm-aout too.  */

-	.text

-	.code 32

-	.align 	0

-

-	.global	_mainCRTStartup

-	.global	_start

-	.global	start

-start:

-_start:

-_mainCRTStartup:

-

-/* Start by setting up a stack */

-	/*  Set up the stack pointer to end of bss */

-	ldr	r3, .LC2

-	mov 	sp, r3

-

-	sub	sl, sp, #512	/* Still assumes 512 bytes below sl */

-

-	mov 	a2, #0		/* Second arg: fill value */

-	mov	fp, a2		/* Null frame pointer */

-	mov	r7, a2		/* Null frame pointer for Thumb */

-	

-	ldr	a1, .LC1	/* First arg: start of memory block */

-	ldr	a3, .LC2	/* Second arg: end of memory block */

-	sub	a3, a3, a1	/* Third arg: length of block */

-	

-	mov	r0, #0		/*  no arguments  */

-	mov	r1, #0		/*  no argv either */

-

-	bl	main

-	bl	exit		/* Should not return */

-

-	/* For Thumb, constants must be after the code since only 

-	positive offsets are supported for PC relative addresses. */

-	

-	.align 0

-.LC1:

-	.word	__bss_start__

-.LC2:

-	.word	__bss_end__

-

+/* Sample initialization file */
+	
+	.extern	main
+	.extern	exit
+	
+/* .text is used instead of .section .text so it works with arm-aout too.  */
+	.text
+	.code 32
+	.align 	0
+
+	.global	_mainCRTStartup
+	.global	_start
+	.global	start
+start:
+_start:
+_mainCRTStartup:
+
+/* Start by setting up a stack */
+	/*  Set up the stack pointer to end of bss */
+	ldr	r3, .LC2
+	mov 	sp, r3
+
+	sub	sl, sp, #512	/* Still assumes 512 bytes below sl */
+
+	mov 	a2, #0		/* Second arg: fill value */
+	mov	fp, a2		/* Null frame pointer */
+	mov	r7, a2		/* Null frame pointer for Thumb */
+	
+	ldr	a1, .LC1	/* First arg: start of memory block */
+	ldr	a3, .LC2	/* Second arg: end of memory block */
+	sub	a3, a3, a1	/* Third arg: length of block */
+	
+	mov	r0, #0		/*  no arguments  */
+	mov	r1, #0		/*  no argv either */
+
+	bl	main
+	bl	exit		/* Should not return */
+
+	/* For Thumb, constants must be after the code since only 
+	positive offsets are supported for PC relative addresses. */
+	
+	.align 0
+.LC1:
+	.word	__bss_start__
+.LC2:
+	.word	__bss_end__
+
diff --git a/testing/examples/ledtest-imx27ads/gdbinit-imx27ads b/testing/examples/ledtest-imx27ads/gdbinit-imx27ads
index 44758cf1..4764bc73 100644
--- a/testing/examples/ledtest-imx27ads/gdbinit-imx27ads
+++ b/testing/examples/ledtest-imx27ads/gdbinit-imx27ads
@@ -1,36 +1,36 @@
-echo Script to load ledtest on iMX27ADS.\n

-

-# Note: you need to startup openocd with "-f board/imx27ads.cfg"

-# in order to it initialize RAM memory.

-

-# SETUP GDB :

-#

-# Common gdb setup for ARM CPUs

-set complaints 1

-set output-radix 10

-set input-radix 10

-set prompt (arm-gdb)

-set endian little

-dir .

-

-# CONNECT TO TARGET :

-target remote 127.0.0.1:3333

-

-#  LOAD IMAGE :

-#

-

-# Load the program executable called "u-boot"

-load test.elf

-

-# Load the symbols for the program.

-symbol-file test.elf

-

-# RUN TO MAIN :

-#

-# Set a breakpoint at main().

-#b reset

-b main

-

-# Run to the breakpoint.

-c

-

+echo Script to load ledtest on iMX27ADS.\n
+
+# Note: you need to startup openocd with "-f board/imx27ads.cfg"
+# in order to it initialize RAM memory.
+
+# SETUP GDB :
+#
+# Common gdb setup for ARM CPUs
+set complaints 1
+set output-radix 10
+set input-radix 10
+set prompt (arm-gdb)
+set endian little
+dir .
+
+# CONNECT TO TARGET :
+target remote 127.0.0.1:3333
+
+#  LOAD IMAGE :
+#
+
+# Load the program executable called "u-boot"
+load test.elf
+
+# Load the symbols for the program.
+symbol-file test.elf
+
+# RUN TO MAIN :
+#
+# Set a breakpoint at main().
+#b reset
+b main
+
+# Run to the breakpoint.
+c
+
diff --git a/testing/examples/ledtest-imx27ads/ldscript b/testing/examples/ledtest-imx27ads/ldscript
index 39cf7684..a8f0a088 100644
--- a/testing/examples/ledtest-imx27ads/ldscript
+++ b/testing/examples/ledtest-imx27ads/ldscript
@@ -1,18 +1,18 @@
-SECTIONS

-{

-    . = 0xA0000000;

-	.text : { *(.text) }

-	.data ALIGN(0x10): { *(.data) }

-	.bss ALIGN(0x10): {

-	    __bss_start__ = ABSOLUTE(.);

-	    *(.bss)

-	    . += 0x100;

-        }

-	__bss_end__ = .;

-PROVIDE (__stack = .);

-	_end = .;

-	.debug_info     0 : { *(.debug_info) }

-   	.debug_abbrev   0 : { *(.debug_abbrev) }

-   	.debug_line     0 : { *(.debug_line) }

-   	.debug_frame    0 : { *(.debug_frame) }

-}

+SECTIONS
+{
+    . = 0xA0000000;
+	.text : { *(.text) }
+	.data ALIGN(0x10): { *(.data) }
+	.bss ALIGN(0x10): {
+	    __bss_start__ = ABSOLUTE(.);
+	    *(.bss)
+	    . += 0x100;
+        }
+	__bss_end__ = .;
+PROVIDE (__stack = .);
+	_end = .;
+	.debug_info     0 : { *(.debug_info) }
+   	.debug_abbrev   0 : { *(.debug_abbrev) }
+   	.debug_line     0 : { *(.debug_line) }
+   	.debug_frame    0 : { *(.debug_frame) }
+}
diff --git a/testing/examples/ledtest-imx27ads/test.c b/testing/examples/ledtest-imx27ads/test.c
index 945778df..abb3bd15 100644
--- a/testing/examples/ledtest-imx27ads/test.c
+++ b/testing/examples/ledtest-imx27ads/test.c
@@ -1,60 +1,60 @@
-/***************************************************************************

- *   Copyright (C) 2009 by Alan Carvalho de Assis       		   *

- *   acassis@gmail.com                                                     *

- *                                                                         *

- *   This program is free software; you can redistribute it and/or modify  *

- *   it under the terms of the GNU General Public License as published by  *

- *   the Free Software Foundation; either version 2 of the License, or     *

- *   (at your option) any later version.                                   *

- *                                                                         *

- *   This program is distributed in the hope that it will be useful,       *

- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *

- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *

- *   GNU General Public License for more details.                          *

- *                                                                         *

- *   You should have received a copy of the GNU General Public License     *

- *   along with this program; if not, write to the                         *

- *   Free Software Foundation, Inc.,                                       *

- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *

- ***************************************************************************/

-

-void delay()

-{

-	int i;

-	for (i = 0; i < 500000; i++);

-}

-

-/* MAIN ARM FUNTION */

-int main (void)  

-{

-	int i;	

-        volatile unsigned char *ledoff = ((volatile unsigned char *)0xD4000008);

-        volatile unsigned char *ledon = ((volatile unsigned char *)0xD400000C);

-	

-	for (i = 0; i < 10000; i++)

-    	{

-		*ledon = 0x30;

-		delay();

-		*ledoff = 0x30;

-		delay();

-    	} /* FOR */

-

-} /* MAIN */

-

-__gccmain()

-{

-} /* GCCMAIN */

-

-

-void exit(int exit_code)

-{

-  while(1);

-} /* EXIT */

-

-

-atexit()

-{

-  while(1);

-} /* ATEXIT */

-

-

+/***************************************************************************
+ *   Copyright (C) 2009 by Alan Carvalho de Assis       		           *
+ *   acassis@gmail.com                                                     *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+
+void delay()
+{
+	int i;
+	for (i = 0; i < 500000; i++);
+}
+
+/* MAIN ARM FUNTION */
+int main (void)  
+{
+	int i;	
+        volatile unsigned char *ledoff = ((volatile unsigned char *)0xD4000008);
+        volatile unsigned char *ledon = ((volatile unsigned char *)0xD400000C);
+	
+	for (i = 0; i < 10000; i++)
+    	{
+		*ledon = 0x30;
+		delay();
+		*ledoff = 0x30;
+		delay();
+    	} /* FOR */
+
+} /* MAIN */
+
+__gccmain()
+{
+} /* GCCMAIN */
+
+
+void exit(int exit_code)
+{
+  while(1);
+} /* EXIT */
+
+
+atexit()
+{
+  while(1);
+} /* ATEXIT */
+
+
diff --git a/testing/examples/ledtest-imx31pdk/test.c b/testing/examples/ledtest-imx31pdk/test.c
index 992447b8..446bc909 100644
--- a/testing/examples/ledtest-imx31pdk/test.c
+++ b/testing/examples/ledtest-imx31pdk/test.c
@@ -1,5 +1,5 @@
 /***************************************************************************
- *   Copyright (C) 2009 by Alan Carvalho de Assis       		   *
+ *   Copyright (C) 2009 by Alan Carvalho de Assis       		           *
  *   acassis@gmail.com                                                     *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *