summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorduane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2008-12-27 02:18:06 +0000
committerduane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2008-12-27 02:18:06 +0000
commite03f4f5a9bd233ff04e0b001ea1e615a04dc6f34 (patch)
treeb4e401effab59831859a7a6afbafecf875a1717c
parentdbd26e3a27bcc50854b768bad146882a02dc58f0 (diff)
downloadopenocd_libswd-e03f4f5a9bd233ff04e0b001ea1e615a04dc6f34.tar.gz
openocd_libswd-e03f4f5a9bd233ff04e0b001ea1e615a04dc6f34.tar.bz2
openocd_libswd-e03f4f5a9bd233ff04e0b001ea1e615a04dc6f34.tar.xz
openocd_libswd-e03f4f5a9bd233ff04e0b001ea1e615a04dc6f34.zip
From Dirk Behme - Further docu fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@1278 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-rw-r--r--doc/openocd.texi49
1 files changed, 43 insertions, 6 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index a26f9ed2..fdbed6b5 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -1459,7 +1459,7 @@ parameters'', the required parameters are:
@itemize @bullet
@item @b{-irlen NUMBER} - the length in bits of the instruction register
@item @b{-ircapture NUMBER} - the ID code capture command.
-@item @b{-irmask NUMBER} - the corrisponding mask for the ir register.
+@item @b{-irmask NUMBER} - the corresponding mask for the ir register.
@comment END REQUIRED
@end itemize
An example of a FOOBAR Tap
@@ -2399,14 +2399,12 @@ port is 5555.
@section Daemon Commands
-@subsection sleep
-@b{sleep} <@var{msec}>
+@subsection sleep [@var{msec}]
@cindex sleep
@*Wait for n milliseconds before resuming. Useful in connection with script files
(@var{script} command and @var{target_script} configuration).
-@subsection sleep
-@b{shutdown}
+@subsection shutdown
@cindex shutdown
@*Close the OpenOCD daemon, disconnecting all clients (GDB, Telnet, Other).
@@ -2803,7 +2801,8 @@ In general these commands control JTAG taps at a very low level. For
example if you need to control a JTAG Route Controller (ie: the
OMAP3530 on the Beagle Board has one) you might use these commands in
a script or an event procedure.
-
+@section Commands
+@cindex Commands
@itemize @bullet
@item @b{scan_chain}
@cindex scan_chain
@@ -2837,6 +2836,44 @@ a script or an event procedure.
Display/modify variable field <@var{var}> <@var{field}> [@var{value}|@var{flip}].
@end itemize
+@section Tap states
+@cindex Tap states
+Available tap_states are:
+@itemize @bullet
+@item @b{RESET}
+@cindex RESET
+@item @b{IDLE}
+@cindex IDLE
+@item @b{DRSELECT}
+@cindex DRSELECT
+@item @b{DRCAPTURE}
+@cindex DRCAPTURE
+@item @b{DRSHIFT}
+@cindex DRSHIFT
+@item @b{DREXIT1}
+@cindex DREXIT1
+@item @b{DRPAUSE}
+@cindex DRPAUSE
+@item @b{DREXIT2}
+@cindex DREXIT2
+@item @b{DRUPDATE}
+@cindex DRUPDATE
+@item @b{IRSELECT}
+@cindex IRSELECT
+@item @b{IRCAPTURE}
+@cindex IRCAPTURE
+@item @b{IRSHIFT}
+@cindex IRSHIFT
+@item @b{IREXIT1}
+@cindex IREXIT1
+@item @b{IRPAUSE}
+@cindex IRPAUSE
+@item @b{IREXIT2}
+@cindex IREXIT2
+@item @b{IRUPDATE}
+@cindex IRUPDATE
+@end itemize
+
@node TFTP
@chapter TFTP