summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorØyvind Harboe <oyvind.harboe@zylin.com>2010-05-05 09:32:43 +0200
committerØyvind Harboe <oyvind.harboe@zylin.com>2010-05-05 15:24:25 +0200
commitf7e0f3c285e9b1578184da886792e02d253ea687 (patch)
treea7493d82be3551a20fa1664cdd5639880006c647
parent3077f5845f197c5e21fc4ed917722297c74ef754 (diff)
downloadopenocd_libswd-f7e0f3c285e9b1578184da886792e02d253ea687.tar.gz
openocd_libswd-f7e0f3c285e9b1578184da886792e02d253ea687.tar.bz2
openocd_libswd-f7e0f3c285e9b1578184da886792e02d253ea687.tar.xz
openocd_libswd-f7e0f3c285e9b1578184da886792e02d253ea687.zip
flash: erase_address now has an unlock option
Quite useful to be able to unlock the flash, just like in the flash write_image cmd. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
-rw-r--r--doc/openocd.texi6
-rw-r--r--src/flash/nor/core.c2
-rw-r--r--src/flash/nor/core.h3
-rw-r--r--src/flash/nor/tcl.c47
4 files changed, 41 insertions, 17 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 49df1590..d311c8ee 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -21,7 +21,7 @@ of the Open On-Chip Debugger (OpenOCD).
@itemize @bullet
@item Copyright @copyright{} 2008 The OpenOCD Project
@item Copyright @copyright{} 2007-2008 Spencer Oliver @email{spen@@spen-soft.co.uk}
-@item Copyright @copyright{} 2008 Oyvind Harboe @email{oyvind.harboe@@zylin.com}
+@item Copyright @copyright{} 2008-2010 Oyvind Harboe @email{oyvind.harboe@@zylin.com}
@item Copyright @copyright{} 2008 Duane Ellis @email{openocd@@duaneellis.com}
@item Copyright @copyright{} 2009-2010 David Brownell
@end itemize
@@ -4043,7 +4043,7 @@ specifies "to the end of the flash bank".
The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
-@deffn Command {flash erase_address} [@option{pad}] address length
+@deffn Command {flash erase_address} [@option{pad}] [@option{unlock}] address length
Erase sectors starting at @var{address} for @var{length} bytes.
Unless @option{pad} is specified, @math{address} must begin a
flash sector, and @math{address + length - 1} must end a sector.
@@ -4053,6 +4053,8 @@ The flash bank to use is inferred from the @var{address}, and
the specified length must stay within that bank.
As a special case, when @var{length} is zero and @var{address} is
the start of the bank, the whole flash is erased.
+If @option{unlock} is specified, then the flash is unprotected
+before erase starts.
@end deffn
@deffn Command {flash fillw} address word length
diff --git a/src/flash/nor/core.c b/src/flash/nor/core.c
index 232d5037..e07ca1f6 100644
--- a/src/flash/nor/core.c
+++ b/src/flash/nor/core.c
@@ -502,7 +502,7 @@ static int flash_driver_unprotect(struct flash_bank *bank, int first, int last)
return flash_driver_protect(bank, 0, first, last);
}
-static int flash_unlock_address_range(struct target *target, uint32_t addr, uint32_t length)
+int flash_unlock_address_range(struct target *target, uint32_t addr, uint32_t length)
{
/* By default, pad to sector boundaries ... the real issue here
* is that our (only) caller *permanently* removes protection,
diff --git a/src/flash/nor/core.h b/src/flash/nor/core.h
index 797cf686..b1526774 100644
--- a/src/flash/nor/core.h
+++ b/src/flash/nor/core.h
@@ -108,6 +108,9 @@ int flash_register_commands(struct command_context *cmd_ctx);
int flash_erase_address_range(struct target *target,
bool pad, uint32_t addr, uint32_t length);
+int flash_unlock_address_range(struct target *target, uint32_t addr,
+ uint32_t length);
+
/**
* Writes @a image into the @a target flash. The @a written parameter
* will contain the
diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c
index 66b8ac34..947fd046 100644
--- a/src/flash/nor/tcl.c
+++ b/src/flash/nor/tcl.c
@@ -194,32 +194,40 @@ COMMAND_HANDLER(handle_flash_erase_check_command)
COMMAND_HANDLER(handle_flash_erase_address_command)
{
struct flash_bank *p;
- int retval;
+ int retval = ERROR_OK;
int address;
int length;
bool do_pad = false;
+ bool do_unlock = false;
struct target *target = get_current_target(CMD_CTX);
- switch (CMD_ARGC) {
- case 3:
+ while (CMD_ARGC >= 3)
+ {
/* Optionally pad out the address range to block/sector
* boundaries. We can't know if there's data in that part
* of the flash; only do padding if we're told to.
*/
- if (strcmp("pad", CMD_ARGV[0]) != 0)
+ if (strcmp("pad", CMD_ARGV[0]) == 0)
+ {
+ do_pad = true;
+ } else if (strcmp("unlock", CMD_ARGV[0]) == 0)
+ {
+ do_unlock = true;
+ } else
+ {
return ERROR_COMMAND_SYNTAX_ERROR;
- do_pad = true;
+ }
CMD_ARGC--;
CMD_ARGV++;
- /* FALL THROUGH */
- case 2:
- COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], address);
- COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], length);
- break;
- default:
+ }
+ if (CMD_ARGC != 2)
+ {
return ERROR_COMMAND_SYNTAX_ERROR;
}
+ COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], address);
+ COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], length);
+
if (length <= 0)
{
command_print(CMD_CTX, "Length must be >0");
@@ -238,7 +246,15 @@ COMMAND_HANDLER(handle_flash_erase_address_command)
struct duration bench;
duration_start(&bench);
- retval = flash_erase_address_range(target, do_pad, address, length);
+ if (do_unlock)
+ {
+ retval = flash_unlock_address_range(target, address, length);
+ }
+
+ if (retval == ERROR_OK)
+ {
+ retval = flash_erase_address_range(target, do_pad, address, length);
+ }
if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK))
{
@@ -709,12 +725,15 @@ static const struct command_registration flash_exec_command_handlers[] = {
.name = "erase_address",
.handler = handle_flash_erase_address_command,
.mode = COMMAND_EXEC,
- .usage = "['pad'] address length",
+ .usage = "['pad'] ['unlock'] address length",
.help = "Erase flash sectors starting at address and "
"continuing for length bytes. If 'pad' is specified, "
"data outside that range may also be erased: the start "
"address may be decreased, and length increased, so "
- "that all of the first and last sectors are erased.",
+ "that all of the first and last sectors are erased. "
+ "If 'unlock' is specified, then the flash is unprotected "
+ "before erasing.",
+
},
{
.name = "fillw",