Charles Hardin <ckhardin@gmail.com> move jim into helper

git-svn-id: svn://svn.berlios.de/openocd/trunk@822 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 0 insertions, 162 deletions

diff --git a/src/startup.tcl b/src/startup.tcl
deleted file mode 100644
index fc5f9e1a..00000000
--- a/src/startup.tcl
+++ /dev/null
@@ -1,162 +0,0 @@
-#
-# Defines basic Tcl procs that must be there for
-# OpenOCD to work.
-#
-# Embedded into OpenOCD executable
-#
-
-
-# Help text list. A list of command + help text pairs.
-#
-# Commands can be more than one word and they are stored
-# as "flash banks" "help text x x x"
-
-proc add_help_text {cmd cmd_help} {
-	global ocd_helptext
-	lappend ocd_helptext [list $cmd $cmd_help]
-}
-
-proc get_help_text {} {
-	global ocd_helptext
-	return $ocd_helptext
-}
-
-# Production command
-# FIX!!! need to figure out how to feed back relevant output
-# from e.g. "flash banks" command...
-proc board_produce {filename serialnumber} {
-	openocd "reset init"
-	openocd "flash write_image erase $filename [flash] bin"]]
-	openocd "verify_image $filename [flash] bin"]]
-	echo "Successfully ran production procedure"
-}
-
-proc board_test {} {
-	echo "Production test not implemented"
-}
-
-# Show flash in human readable form
-# This is an example of a human readable form of a low level fn
-proc flash_banks {} { 
-	set i 0 	
-	set result ""
-	foreach {a} [openocd_flash_banks] {
-		if {$i > 0} {
-			set result "$result\n"
-		}
-		set result [format "$result#%d: %s at 0x%08x, size 0x%08x, buswidth %d, chipwidth %d" $i $a(name) $a(base) $a(size) $a(bus_width) $a(chip_width)]
-		set i [expr $i+1]	
-	}	
-	return $result
-}
-
-# We need to explicitly redirect this to the OpenOCD command
-# as Tcl defines the exit proc
-proc exit {} {
-	openocd_throw exit
-}
-
-#Print help text for a command. Word wrap
-#help text that is too wide inside column.
-proc help {args} {
-	global ocd_helptext
-	set cmd $args
-	foreach a [lsort $ocd_helptext] {
-		if {[string length $cmd]==0||[string first $cmd $a]!=-1||[string first $cmd [lindex $a 1]]!=-1} {
-			set w 50
-			set cmdname [lindex $a 0]
-			set h [lindex $a 1]
-			set n 0
-			while 1 {
-				if {$n > [string length $h]} {break}
-				
-				set next_a [expr $n+$w]
-				if {[string length $h]>$n+$w} {
-					set xxxx [string range $h $n [expr $n+$w]]
-					for {set lastpos [expr [string length $xxxx]-1]} {$lastpos>=0&&[string compare [string range $xxxx $lastpos $lastpos] " "]!=0} {set lastpos [expr $lastpos-1]} {
-					}
-					#set next_a -1
-					if {$lastpos!=-1} {
-						set next_a [expr $lastpos+$n+1]
-					}
-				}
-				
-				
-				puts [format "%-25s %s" $cmdname [string range $h $n [expr $next_a-1]] ]
-				set cmdname ""
-				set n [expr $next_a]
-			}
-		}
-	}
-}
-
-add_help_text help "Tcl implementation of help command"
-
-
-#a bit of backwards compatibility
-proc openocd_throw {cmd} {
-	set openocd_output ""
-	eval $cmd
-	return $openocd_output
-}
-
-#a bit of backwards compatibility
-proc openocd {cmd} {
-	set openocd_output ""
-	eval $cmd
-	return $openocd_output
-}
-
-# If a fn is unknown to Tcl, we try to execute it as an OpenOCD command
-#
-# We also support two level commands. "flash banks" is translated to
-# flash_banks
-proc unknown {args} {
-	# do the name mangling from "flash banks" to "flash_banks"
-	if {[llength $args]>=2} {
-		set cmd_name "[lindex $args 0]_[lindex $args 1]"
-		# Fix?? add a check here if this is a command?
-		# we'll strip away args until we fail anyway...
-		return [eval "$cmd_name [lrange $args 2 end]"]
-	}
-	# This really is an unknown command.
-	puts "Unknown command: $args"
-}
-
-
-proc target_script {target_num eventname scriptname} {
-	if {[string compare $eventname reset]==0} {
-		set eventname post_reset
-	}
-
-	# This is the script we invoke
-	proc "target_[set eventname]_[set target_num]" {} "script $scriptname" 
-	
-}
-
-# Try flipping / and \ to find file if the filename does not
-# match the precise spelling
-proc find {filename} {
-	if {[catch {openocd_find $filename} t]==0} {
-		return $t
-	}  
-	if {[catch {openocd_find [string map {\ /} $filename} t]==0} {
-		return $t
-	}  
-	if {[catch {openocd_find [string map {/ \\} $filename} t]==0} {
-		return $t
-	}  
-	# make sure error message matches original input string
-	return [openocd_find $filename]
-}
-add_help_text find "<file> - print full path to file according to OpenOCD search rules"
-
-# Run script
-proc script {filename} {
-	source [find $filename]
-}
-
-add_help_text script "<filename> - filename of OpenOCD script (tcl) to run"
-
-add_help_text target_script "<target#> <event=reset/pre_reset/post_halt/pre_resume/gdb_program_config> <script_file>"
-