diff options
author | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-27 06:44:43 +0000 |
---|---|---|
committer | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-27 06:44:43 +0000 |
commit | 140d6c8e7948710a764965075bfaa700efd09802 (patch) | |
tree | ccb281820c12961eb036d2a00040164d114ad057 /src/target/board/at91rm9200-dk.cfg | |
parent | 7c0e823d0a57df99adc5b1b7975406bfd9e0d9fb (diff) | |
download | openocd_libswd-140d6c8e7948710a764965075bfaa700efd09802.tar.gz openocd_libswd-140d6c8e7948710a764965075bfaa700efd09802.tar.bz2 openocd_libswd-140d6c8e7948710a764965075bfaa700efd09802.tar.xz openocd_libswd-140d6c8e7948710a764965075bfaa700efd09802.zip |
Move TCL script files -- Step 1 of 2:
- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
- Add dist-hook to include such files under src/tcl in the distribution.
- Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
- Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'src/target/board/at91rm9200-dk.cfg')
-rw-r--r-- | src/target/board/at91rm9200-dk.cfg | 78 |
1 files changed, 0 insertions, 78 deletions
diff --git a/src/target/board/at91rm9200-dk.cfg b/src/target/board/at91rm9200-dk.cfg deleted file mode 100644 index 900ee351..00000000 --- a/src/target/board/at91rm9200-dk.cfg +++ /dev/null @@ -1,78 +0,0 @@ -# -# This is for the "at91rm9200-DK" (not the EK) eval board. -# -# The two are probably very simular.... I have DK... -# -# It has atmel at91rm9200 chip. -source [find target/at91rm9200.cfg] -$_TARGETNAME configure -event gdb-attach { reset init } -$_TARGETNAME configure -event reset-init { at91rm9200_dk_init } - -#flash bank <driver> <base> <size> <chip_width> <bus_width> -flash_bank cfi 0x10000000 0x00200000 2 2 0 - - -proc at91rm9200_dk_init { } { - # Try to run at 1khz... Yea, that slow! - # Chip is really running @ 32khz - jtag_khz 8 - - mww 0xfffffc64 0xffffffff - ## disable all clocks but system clock - mww 0xfffffc04 0xfffffffe - ## disable all clocks to pioa and piob - mww 0xfffffc14 0xffffffc3 - ## master clock = slow cpu = slow - ## (means the CPU is running at 32khz!) - mww 0xfffffc30 0 - ## main osc enable - mww 0xfffffc20 0x0000ff01 - ## program pllA - mww 0xfffffc28 0x20263e04 - ## program pllB - mww 0xfffffc2c 0x10483e0e - ## let pll settle... sleep 100msec - sleep 100 - ## switch to fast clock - mww 0xfffffc30 0x202 - ## Sleep some - (go read) - sleep 100 - - #======================================== - # CPU now runs at 180mhz - # SYS runs at 60mhz. - jtag_khz 40000 - #======================================== - - - ## set memc for all memories - mww 0xffffff60 0x02 - ## program smc controller - mww 0xffffff70 0x3284 - ## init sdram - mww 0xffffff98 0x7fffffd0 - ## all banks precharge - mww 0xffffff80 0x02 - ## touch sdram chip to make it work - mww 0x20000000 0 - ## sdram controller mode register - mww 0xffffff90 0x04 - mww 0x20000000 0 - mww 0x20000000 0 - mww 0x20000000 0 - mww 0x20000000 0 - mww 0x20000000 0 - mww 0x20000000 0 - mww 0x20000000 0 - mww 0x20000000 0 - ## sdram controller mode register - ## Refresh, etc.... - mww 0xffffff90 0x03 - mww 0x20000080 0 - mww 0xffffff94 0x1f4 - mww 0x20000080 0 - mww 0xffffff90 0x10 - mww 0x20000000 0 - mww 0xffffff00 0x01 - -} |