Move TCL script files -- Step 1 of 2:

- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
  - Add dist-hook to include such files under src/tcl in the distribution.
  - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
  - Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 0 insertions, 36 deletions

diff --git a/src/target/board/hammer.cfg b/src/target/board/hammer.cfg
deleted file mode 100644
index ed83803f..00000000
--- a/src/target/board/hammer.cfg
+++ /dev/null
@@ -1,36 +0,0 @@
-# Target Configuration for the TinCanTools S3C2410 Based Hammer Module
-# http://www.tincantools.com
-
-source [find target/samsung_s3c2410.cfg]
-
-$_TARGETNAME configure -event reset-init {
-	# Reset Script for the TinCanTools S3C2410 Based Hammer Module
-	# http://www.tincantools.com
-	#
-	# Setup primary clocks and initialize the SDRAM
-	mww 0x53000000 0x00000000
-	mww 0x4a000008 0xffffffff
-	mww 0x4a00000c 0x000007ff
-	mww 0x4c000000 0x00ffffff
-	mww 0x4c000014 0x00000003
-	mww 0x4c000004 0x000a1031
-	mww 0x48000000 0x11111122
-	mww 0x48000004 0x00000700
-	mww 0x48000008 0x00000700
-	mww 0x4800000c 0x00000700
-	mww 0x48000010 0x00000700
-	mww 0x48000014 0x00000700
-	mww 0x48000018 0x00000700
-	mww 0x4800001c 0x00018005
-	mww 0x48000020 0x00018005
-	mww 0x48000024 0x009c0459
-	mww 0x48000028 0x000000b2
-	mww 0x4800002c 0x00000030
-	mww 0x48000030 0x00000030
-	flash probe 0
-}
-
-
-#flash configuration
-#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x00000000 0x1000000 2 2 0