Move TCL script files -- Step 1 of 2:

- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
  - Add dist-hook to include such files under src/tcl in the distribution.
  - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
  - Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 29 insertions, 0 deletions

diff --git a/src/tcl/test/syntax1.cfg b/src/tcl/test/syntax1.cfg
new file mode 100644
index 00000000..fb88d5ae
--- /dev/null
+++ b/src/tcl/test/syntax1.cfg
@@ -0,0 +1,29 @@
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+
+#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
+jtag_reset 1 1
+jtag_reset 0 0
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag newtap lpc2148 one -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f
+
+#target configuration
+#daemon_startup reset
+
+set _TARGETNAME [format "%s.cpu" lpc2148]
+target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-virt 0 -work-area-backup 0
+
+$_TARGETNAME configure -event reset-init { 
+soft_reset_halt 
+mvb 0xE01FC040 0x01 
+}
+
+
+
+flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765
+