David Anders more target lib scripts contributed by

git-svn-id: svn://svn.berlios.de/openocd/trunk@731 b42882b7-edfa-0310-969c-e2dbd0fdcd60

4 files changed, 63 insertions, 1 deletions

diff --git a/src/target/Makefile.am b/src/target/Makefile.am
index 966ec37c..9a8de56c 100644
--- a/src/target/Makefile.am
+++ b/src/target/Makefile.am
@@ -33,5 +33,6 @@ nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.script
 	interface/calao-usb-a9260-c01.cfg interface/calao-usb-a9260-c02.cfg \
 	interface/calao-usb-a9260.cfg target/at91sam9260minimal.cfg  event/lpc2148_reset.script \
 	interface/chameleon.cfg interface/at91rm9200.cfg interface/jlink.cfg interface/arm-usb-ocd.cfg \
-	interface/signalyzer.cfg event/eir-sam7se512_reset.script target/eir-sam7se512.cfg
+	interface/signalyzer.cfg event/eir-sam7se512_reset.script target/eir-sam7se512.cfg \
+	event/hammer_reset.script interface/flyswatter.cfg target/hammer.cfg
 
diff --git a/src/target/event/hammer_reset.script b/src/target/event/hammer_reset.script
new file mode 100644
index 00000000..ae73074a
--- /dev/null
+++ b/src/target/event/hammer_reset.script
@@ -0,0 +1,24 @@
+# Reset Script for the TinCanTools S3C2410 Based Hammer Module

+# http://www.tincantools.com

+#

+# Setup primary clocks and initialize the SDRAM

+mww 0x53000000 0x00000000

+mww 0x4a000008 0xffffffff

+mww 0x4a00000c 0x000007ff

+mww 0x4c000000 0x00ffffff

+mww 0x4c000014 0x00000003

+mww 0x4c000004 0x000a1031

+mww 0x48000000 0x11111122

+mww 0x48000004 0x00000700

+mww 0x48000008 0x00000700

+mww 0x4800000c 0x00000700

+mww 0x48000010 0x00000700

+mww 0x48000014 0x00000700

+mww 0x48000018 0x00000700

+mww 0x4800001c 0x00018005

+mww 0x48000020 0x00018005

+mww 0x48000024 0x009c0459

+mww 0x48000028 0x000000b2

+mww 0x4800002c 0x00000030

+mww 0x48000030 0x00000030

+flash probe 0

diff --git a/src/target/interface/flyswatter.cfg b/src/target/interface/flyswatter.cfg
new file mode 100644
index 00000000..83f5a64b
--- /dev/null
+++ b/src/target/interface/flyswatter.cfg
@@ -0,0 +1,9 @@
+# Interface Configuration for the TinCanTools FT2232 Based Flyswatter

+# http://www.tincantools.com

+

+#interface

+interface ft2232

+ft2232_device_desc "Flyswatter"

+ft2232_layout "flyswatter"

+ft2232_vid_pid 0x0403 0x6010

+jtag_speed 1

diff --git a/src/target/target/hammer.cfg b/src/target/target/hammer.cfg
new file mode 100644
index 00000000..2738e5bb
--- /dev/null
+++ b/src/target/target/hammer.cfg
@@ -0,0 +1,28 @@
+# Target Configuration for the TinCanTools S3C2410 Based Hammer Module

+# http://www.tincantools.com

+

+#use combined on interfaces or targets that can't set TRST/SRST separately

+reset_config trst_and_srst

+

+#jtag scan chain

+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

+jtag_device 4 0x1 0xf 0xe

+

+

+#target configuration

+daemon_startup reset

+#target <type> <endianess> <reset mode>

+target arm920t little run_and_init 0 arm920t

+

+# speed up memory downloads

+arm7 fast_memory_access enable

+arm7_9 dcc_downloads enable

+

+target_script 0 reset event/hammer_reset.script

+

+working_area 0 0x30800000 0x20000 nobackup

+run_and_halt_time 0 1000

+

+#flash configuration

+#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]

+flash bank cfi 0x00000000 0x1000000 2 2 0