diff options
author | Nicolas Pitre <nico@fluxnic.net> | 2009-10-27 01:14:34 -0400 |
---|---|---|
committer | David Brownell <dbrownell@users.sourceforge.net> | 2009-10-26 23:53:32 -0700 |
commit | 68937cadfb42026b4c8b2c9e43acaf3fb409c4db (patch) | |
tree | 4f78458325e2cd14b4a1362131aef9c17b6e015e /tcl/board/hammer.cfg | |
parent | 068a6c7895607a6af6758ad18bace683f6b7499d (diff) | |
download | openocd_libswd-68937cadfb42026b4c8b2c9e43acaf3fb409c4db.tar.gz openocd_libswd-68937cadfb42026b4c8b2c9e43acaf3fb409c4db.tar.bz2 openocd_libswd-68937cadfb42026b4c8b2c9e43acaf3fb409c4db.tar.xz openocd_libswd-68937cadfb42026b4c8b2c9e43acaf3fb409c4db.zip |
ARM: fix Thumb mode handling when single-stepping register based branch insns
Currently, OpenOCD is always caching the PC value without the T bit.
This means that assignment to the PC register must clear that bit and set
the processor state to Thumb when it is set. And when the PC register
value is transferred to another register or stored into memory then
the T bit must be restored.
Discussion: It is arguable if OpenOCd should have preserved the original
PC value which would have greatly simplified this code. The processor
state could then be obtained simply by getting at bit 0 of the PC. This
however would require special handling elsewhere instead since the T bit
is not always relevant (like when PC is used with ALU insns or as an index
with some addressing modes). It is unclear which way would be simpler in
the end.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'tcl/board/hammer.cfg')
0 files changed, 0 insertions, 0 deletions