diff options
author | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-07-06 08:05:58 +0000 |
---|---|---|
committer | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-07-06 08:05:58 +0000 |
commit | 0ab8e710dbaaf5a813a35fb48dd9e5dc7c30200d (patch) | |
tree | 10498b266a6dd40683b440ae2993914b896dc396 /tcl/board | |
parent | e2dd1dbab9ccd5a6d5685c4478dcfd5215deb4b6 (diff) | |
download | openocd_libswd-0ab8e710dbaaf5a813a35fb48dd9e5dc7c30200d.tar.gz openocd_libswd-0ab8e710dbaaf5a813a35fb48dd9e5dc7c30200d.tar.bz2 openocd_libswd-0ab8e710dbaaf5a813a35fb48dd9e5dc7c30200d.tar.xz openocd_libswd-0ab8e710dbaaf5a813a35fb48dd9e5dc7c30200d.zip |
bitrot: fix numerous syntax errors
added correct jtag device id
git-svn-id: svn://svn.berlios.de/openocd/trunk@2467 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl/board')
-rw-r--r-- | tcl/board/digi_connectcore_wi-9c.cfg | 14 |
1 files changed, 6 insertions, 8 deletions
diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg index 93317327..f8b89122 100644 --- a/tcl/board/digi_connectcore_wi-9c.cfg +++ b/tcl/board/digi_connectcore_wi-9c.cfg @@ -26,7 +26,7 @@ jtag_rclk 1000 if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { - set _CPUTAPID 0xFFFFFFFF + set _CPUTAPID 0x07926031 } set _TARGETNAME [format "%s.cpu" $_CHIPNAME] @@ -41,6 +41,7 @@ jtag_ntrst_delay 0 ###################### target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs + $_TARGETNAME configure -event reset-init { mww 0x90600104 0x33313333 mww 0xA0700000 0x00000001 # Enable the memory controller. @@ -99,12 +100,12 @@ $_TARGETNAME configure -event reset-init { mww 0xA0700160 0x00084280 # Enable buffer access #Set byte lane state (static mem 1)" - mww 0xA0700220, 0x00000082 + mww 0xA0700220 0x00000082 #Flash Start - mww 0xA09001F8, 0x50000000 + mww 0xA09001F8 0x50000000 #Flash Mask Reg - mww 0xA09001FC, 0xFF000001 - mww 0xA0700028, 0x00000001 + mww 0xA09001FC 0xFF000001 + mww 0xA0700028 0x00000001 # RAMAddr = 0x00020000 # RAMSize = 0x00004000 @@ -122,6 +123,3 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00000000 -work-area-s #M29DW323DB - not working #flash bank cfi <base> <size> <chip width> <bus width> <target#> flash bank cfi 0x50000000 0x0400000 2 2 0 - - - |