diff options
| author | dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-09-21 00:37:58 +0000 |
|---|---|---|
| committer | dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-09-21 00:37:58 +0000 |
| commit | 108028112fdf285cd74eaf50d6a353a09039bb7f (patch) | |
| tree | ab8065b2be85c67c350911629365939d53e9dbbd /tcl/target/ti_dm355.cfg | |
| parent | d20103cd93641bca44f737b45004f495cb24a27f (diff) | |
| download | openocd_libswd-108028112fdf285cd74eaf50d6a353a09039bb7f.tar.gz openocd_libswd-108028112fdf285cd74eaf50d6a353a09039bb7f.tar.bz2 openocd_libswd-108028112fdf285cd74eaf50d6a353a09039bb7f.tar.xz openocd_libswd-108028112fdf285cd74eaf50d6a353a09039bb7f.zip | |
Ensure that DaVinci chips can't start with a too-fast JTAG clock.
It can be sped up later, once it's known the PLLs are active.
Note that modern tools from TI all use adaptive clocking; and
that if that's done with OpenOCD, "too fast" is also a non-issue.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2740 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl/target/ti_dm355.cfg')
| -rw-r--r-- | tcl/target/ti_dm355.cfg | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/tcl/target/ti_dm355.cfg b/tcl/target/ti_dm355.cfg index e5ef8cd2..abfba109 100644 --- a/tcl/target/ti_dm355.cfg +++ b/tcl/target/ti_dm355.cfg @@ -86,6 +86,12 @@ $_TARGETNAME configure \ -work-area-size 0x4000 \ -work-area-backup 0 +# be absolutely certain the JTAG clock will work with the worst-case +# CLKIN = 24 MHz (best case: 36 MHz) even when no bootloader turns +# on the PLL and starts using it. OK to speed up after clock setup. +jtag_rclk 1500 +$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 } + arm7_9 fast_memory_access enable arm7_9 dcc_downloads enable |