diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2010-07-17 02:59:23 -0400 |
|---|---|---|
| committer | David Brownell <db@helium.(none)> | 2010-07-17 02:59:23 -0400 |
| commit | 2fdc1db30481279e39cdb1928a7455f75e34eb3f (patch) | |
| tree | 29f3788bc65c820fd13191829dc62d6dae93f6af /tcl | |
| parent | a4dace3122749991136d9d50ef685f5d641d3295 (diff) | |
| download | openocd_libswd-2fdc1db30481279e39cdb1928a7455f75e34eb3f.tar.gz openocd_libswd-2fdc1db30481279e39cdb1928a7455f75e34eb3f.tar.bz2 openocd_libswd-2fdc1db30481279e39cdb1928a7455f75e34eb3f.tar.xz openocd_libswd-2fdc1db30481279e39cdb1928a7455f75e34eb3f.zip | |
lm3s811-ek uses generic stellaris target config
There's no point in an lm3s811-specific target file,
so remove it in favor of the generic "stellaris.cfg".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'tcl')
| -rw-r--r-- | tcl/board/ek-lm3s811.cfg | 7 | ||||
| -rw-r--r-- | tcl/target/lm3s811.cfg | 29 |
2 files changed, 4 insertions, 32 deletions
diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg index 7d3f2ce3..66519f67 100644 --- a/tcl/board/ek-lm3s811.cfg +++ b/tcl/board/ek-lm3s811.cfg @@ -4,13 +4,14 @@ # http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html # include the FT2232 interface config for on-board JTAG interface +# NOTE: older '811-EK boards (before rev C) shouldn't use this. source [find interface/luminary.cfg] + set CHIPNAME lm3s811 + # include the target config -source [find target/lm3s811.cfg] +source [find target/stellaris.cfg] -# jtag speed -adapter_khz 500 adapter_nsrst_delay 100 diff --git a/tcl/target/lm3s811.cfg b/tcl/target/lm3s811.cfg deleted file mode 100644 index 49879d09..00000000 --- a/tcl/target/lm3s811.cfg +++ /dev/null @@ -1,29 +0,0 @@ -# Script for TI/Luminary Stellaris LM3S811 - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME lm3s811 -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x3ba00477 -} - -#jtag scan chain -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID - -# the luminary variant causes a software reset rather than asserting SRST -# this stops the debug registers from being cleared -# this will be fixed in later revisions of silicon -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3s - -# 8k working area at base of ram, not backed up -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000 - -#flash configuration -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME |